IX S CORP L6E D MM 4b4bee2b 0000701 & Data Sheet #: 3501A December 1988 DUIXyYSs HIGH CURRENT MOSIGBT IXGH6ON5O, 60 ADVANCE DATA SHEET T. oy 1s MAXIMUM RATINGS Parameter Sym. IXGH60N50,50A IXGHGON60,60A Unit 60 Am ps, 500-600 Volts Collector-Emitter Voltage (1) Voces 500 600 Vie TO-247 Collector-Gate Voltage (Rae=1.0MQ)(1) Veer 500 600 Vdo Gate-Emitter Voltage Continuous Vee +20 Ve Gate-Emitter Voltage Transient VGEM +30 Collector Gurrent Continuous (To = 25 C) Io 7 Ade Collector Current Continuous (Te = 90 C) Io 60 Ade Collector Current Pulsed (3) low 200 A Total Power Dissipation Po 310 Power Dissipation Derating > 25 C 25 wc Operating and Storage Temperature Ty & Tetg -65 to +150 c G = Gate Thermal Resistance Rinc 0.4 Wl GCE C = Collector Max. Lead Temp. for Soldering TL 300 (1.6 rm rom case for 10 sec.) C E = Emitier ELECTRICAL CHARACTERISTICS T, = 25 C unless otherwise specified Parameter Type Min. | Typ. | Max. |Units Test Conditions Viarjces Collector-Emitter Breakdown Voltage | 60N50,50A | 500 | | V Vee =0V 60N60,60A | 600] | Vv Io = 250 pA Veet) Gate Threshold Voltage ALL 25])/] 50) V Voce = Vee, Ic = 250 pA lags Gate-Emitter Leakage ALL | | 100] nA | Vae=+20 Voc Ices Zero Gate Voltage Collector Current ALL | | 200] pA | Vce= Rated Vierjces x 0.8, Vee = 0 V | | 1000) pA | Vce= Rated Viaajces x 0.8, Vac = 0 V, To = 125 C Vck(se) Collector-Emitter Saturation Voltage | 60N50,60 | | |] 25] V Vee = 15 V, Ic = 60A 6ONS5OA,60A] |} | 3.0] V . fs Forward Transconductance (2) ALL 15 | 30}; {1S Vce = 10 V, Ic = 30A Ciss Input Capacitance ALL }|48001 5500} pF | Vae=0V, Vce = 25 V, f = 1.0MHz Coss Output Capacitance ALL ~- 1400] 500 | pF Ciss Reverse Transfer Capacitance ALL |200] 250 | pF SWITCHING CHARACTERISTICS taten) Turn-On Delay Time ALL | | 200 | nS | Resistive Load, Ty = 125 C (4) t Current Rise Time ALL | | 200 | ns = sor 5 yer = Rated Visajces x 0.8 tater) Turm-Otf Delay Time (4) ALL | | 1.0 | ps | Ra=102 tt Current Fall Time (4) 60N50,60 | | | 20 | nS 6ON50A,60A| | | 0.5 | pS td(ot Turn-Off Delay Time (4) ALL | | 1.0 | pS | Inductive Load, Ty = 125 C (4) - L = 300 pH, Ic = 60A t Current Falt Time (4) 60N50,60 | | 2.0 | 3.0 | pS | Vee (Clamp) = Rated Visajces x 0.8 60N50A,60A| | 0.5 | 0.8 | pS | Vae=15V, Ra=102 (1) Ty = 25 C to 150C *The data supplied herein reflects the Design Technical Objective (2) Pulse Test: Pulse width < 300 uS, duty cycle < 2% (8) Repetitive Rating: Pulse width limited by max. junction temperature (4) Switching times may increase for Vcg (Clamp) > 0.8 x Vianjces or Ty < 60 C TEL: (408) 435-1900 + Specification. The subject products are in Product Development. IXYS reserves the right to change limits, test conditions, and dimensions without notice. IXYS Corporation 2355 Zanker Rd., San Jose, CA 95131-1109 TLX: 384928 IXYS SNJ UD * FAX: (408) 435-0670