ID-50 50W Isolated Dual Output Switching Power Supply series Features : Isolated output & GND for CH1,CH2 Universal AC input/Full range Protections:Short circuit/Overload/Over voltage Cooling by free air convection 100% full load burn-in test Fixed switching frequency at 50KHz Low cost High reliability 1 year warranty SPECIFICATION ID-50A MODEL OUTPUT INPUT ID-50D CH2 CH1 CH2 CH1 CH2 CH1 DC VOLTAGE 5V 5V 13.5V 13.5V 27V 27V 5V 13.5V RATED CURRENT 6A 2A 1.8A 1.8A 0.9A 0.9A 5A 1.7A CURRENT RANGE 0.5 ~ 6A 0 ~ 2A 0.3 ~ 2A 0 ~ 2A 0.18 ~ 1A 0 ~ 1A 1 ~ 5A 0 ~ 2A RATED POWER 40W RIPPLE & NOISE (max.) Note.2 50mVp-p 48.6W 100mVp-p 48.6W 100mVp-p VOLTAGE ADJ. RANGE CH1,2 : 4.75 ~ 5.5V VOLTAGE TOLERANCE Note.3 1.0% 2.0% 150mVp-p CH1,2 : 12 ~ 15V 1.0% 2.0% 100mVp-p CH2 48W 150mVp-p CH1,2 : 24 ~ 30V 1.0% 2.0% 50mVp-p 150mVp-p CH1 : 4.75 ~ 5.5V 1.0% 2.0% LINE REGULATION 0.5% 0.5% 0.5% 0.5% 0.3% 0.5% 0.5% 0.5% LOAD REGULATION 0.5% 1.0% 0.5% 1.0% 0.3% 1.0% 0.5% 1.0% SETUP, RISE TIME 1600ms, 50ms at full load HOLD TIME (Typ.) VOLTAGE RANGE 100ms at full load 85 ~ 264VAC 120 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY(Typ.) 66% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 1A/115VAC 0.6A/230VAC COLD START 22A/115VAC 45A/230VAC OVER LOAD PROTECTION OVER VOLTAGE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMI CONDUCTION & RADIATION MTBF DIMENSION PACKING NOTE ID-50C CH1 LEAKAGE CURRENT OTHERS ID-50B OUTPUT 72% 70% 68% <3.5mA / 240VAC 105 ~ 150%/115VAC rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed 13.5V:17 ~ 21V 27V:32 ~ 40V 5V: 6.4 ~ 7.5V 5V:6.4 ~ 7.5V Protection type : Hiccup mode, recovers automatically after fault condition is removed -10 ~ +60 (Refer to output load derating curve) 20 ~ 90% RH non-condensing -20 ~ +85 , 10 ~ 95% RH 0.03%/ (0 ~ 50 )on +5V output 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes Design refer to UL1012 I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC Design refer to FCC Part15 312.2K hrs min. MIL-HDBK-217F (25 159*97*38mm (L*W*H) 0.54Kg; 24pcs/13.8Kg/0.75CUFT ) 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. File Name:ID-50-SPEC 2007-08-30 http://store.iiic.cc/ ID-50 50W Isolated Dual Output Switching Power Supply Mechanical Specification Case No. 901 4.5 series Unit:mm 3.5 11 7 152.5 1 65 8.25 2 3 5 7 6 2 -M 97 84.5 4 3 7 +V1 ADJ +V2 ADJ 3 .5 78 24 159 150 22 M3 38 3.5 18 3 .5 3- 28.5 18.5 9 6.5 117 Terminal Pin No. Assignment Pin No. 1 2 3 4 Assignment AC/L AC/N FG DC OUTPUT G2 Pin No. 5 6 7 Assignment DC OUTPUT +V2 DC OUTPUT G1 DC OUTPUT +V1 Derating Curve Static Characteristics(B) Ta=25 OUTPUT VOLTAGE (V) 100 80 LOAD (%) 60 40 20 -10 -10 0 0 10 20 30 40 50 45 +13.5V 300 12 250 10 200 8 150 6 100 4 50 +13.5V 2 60 (VERTICAL) 55 (HORIZONTAL) AMBIENT TEMPERATURE ( ) 25 60 80 100 120 140 160 180 200 220 240 OUTPUT RIPPLE (mVp-p) 14 260 INPUT VOLTAGE (V) 60Hz File Name:ID-50-SPEC 2007-08-30 http://store.iiic.cc/