STProTM XB Portable Infrared Thermometer Noncontact Temperature Measurement The STPro Thermometer -- The Professional's Rugged Diagnostic Tool. Maintenance professionals monitor motor malfunctions, research heating and ventilation problems, and monitor electrical motor performance safely and easily with the professional Raytek STPro thermometer. Handheld, and portable, the Raytek STPro infrared thermometer stand up to the day-to-day usage professionals require of their equipment. The STPro leaps ahead of standard entry level models by providing expanded temperature ranges, higher resolution optics, tighter accuracy and brighter laser sighting. The single dot Extra Bright Laser Point sighting system makes the center point of the measurement area more visible in all conditions, especially outdoors. In less than a second, the large temperature display provides current and MAX surface temperatures. 1% accuracy Extra Bright Laser Point sighting Temperatures up to 535C/999F MAX temperature display For equipment maintenance, and heating and ventilation troubleshooting, the professional STPro thermometer makes troubleshooting quick and easy. Specifications Temperature Range ST20 XB -32C to 535C Optical Resolution (-25F to 999F) -32C to -26C (-25F to -15F): 3C (5F) -26C to -18C (-15F to 0F): 2.5C (4F) Accuracy (Assumes ambient operating temperature of 23C [73F]) -18C to 23C (0F to 73F): 2C (3F) 23C to 510C (73F to 950F): 1% of reading or 1C (2F), whichever is greater Above 510C (950F): 1.5% of reading 0.5% or 1C (2F), whichever is greater 0.5 second (95% of reading) Response Time 8-14m Spectral Response Pre-set at 0.95 Emissivity* 0C to 50C (32F to 120F) Ambient Operating Temp. 10-90% Relative Humidity -20C to 60C (-13F to 158F) without battery Storage Temperature 320g (11oz) Weight/Dimensions 200 x 160 x 55mm (8 x 6 x 2 in) 9V Alkaline or NiCd Battery Power 10 hrs w/laser & backlight on Battery Life (Alkaline) 20 hrs w/laser & backlight off Repeatability Laser (Class II) Offset single point Laser Point XB Up to 2m (6 ft) 12:1 at focus point Typical Distance to Target Distance to Spot (D:S) MAX Temp. Display Display Hold (7 seconds) LCD Backlit Temperature Display C or F selectable Display Resolution 0.2C (0.5F) Hard Carrying Case Tripod Mounting 1 year Warranty* Nylon Holster Additional Options/Accessories NIST/DKD Traceable Calibration Certificate (includes 1 year warranty) Use the ST20 XB within six feet of the intended target. At greater distances, the measured area will be larger (approximately the distance divided by twelve). D:S (distance to spot using 90% encircled energy at focal point Laser Sighting The ST20 XB offset single-point Laser Point indicates the approximate center of the measurement area. Extra Bright Laser Point *For more details, visit www.raytek.com/emissivity.htm * US only. Warranty duration may vary by country. Raytek Corporation Worldwide Headquarters 1201 Shaffer Rd. PO Box 1820 Santa Cruz, CA 95061-1820 USA Tel: 1 800 866 5478 1 831 458 1110 Fax: 1 831 425 4561 solutions@raytek.com www.raytek.com for up-to-the-minute features To find a Raytek office near you please visit www.raytek.com Worldwide Service Raytek offers services including emergency repairs and calibration. For more information, contact your local office or e-mail: support@raytek.com (c) 2003 Raytek Corporation (1-1301/ Rev. G) 7/2004 Raytek and the Raytek logo are registered trademarks, and ST and STPro are trademarks of Raytek Corp. Specifications subject to change without notice.