FREQUENCY
(MHz)
INSERTION
LOSS
(dB)
INPUT
R. LOSS
(dB)
0.15 0.73 12.89
0.25 0.61 16.56
0.30 0.57 17.77
0.50 0.44 23.21
2.00 0.31 30.49
10.00 0.26 33.62
50.00 0.35 24.13
125.00 0.61 16.90
250.00 1.31 11.59
350.00 2.16 9.26
Ω
RATIO
FREQUENCY
(MHz)
INSERTION LOSS*
3 dB
MHz
2 dB
MHz
1 dB
MHz
1 0.15-350 0.15-350 0.25-250 0.3-125
* Insertion Loss is referenced to mid-band loss, 0.2 dB typ.
ISO 9001 ISO 14001 AS 9100 CERTIFIED
Mini-Circuits
®
P.O. Box 350166, Brooklyn, New York 11235-0003 (718) 934-4500 Fax (718) 332-4661
The Design Engineers Search Engine Provides ACTUAL Data Instantly at
®
Notes: 1. Performance and quality attributes and conditions not expressly stated in this specification sheet are intended to be excluded and do not form a part of this specification sheet. 2. Electrical specifications
and performance data contained herein are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. 3. The parts covered by this specification sheet are subject to
Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard
Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp.
For detailed performance specs
& shopping online see web site
minicircuits.com
IF/RF MICROWAVE COMPONENTS
50Ω 0.15 to 350 MHz
RF Transformer TC1-6+
CASE STYLE: AT224-1
PRICE: $1.99 ea. QTY (20)
$1.69 ea. QTY (100)
Maximum Ratings
Pin Connections
Operating Temperature -40°C to 85°C
Storage Temperature -55°C to 100°C
RF Power 0.25W
DC Current 30mA
REV. OR
M112042
ED-12659/1
TC1-6+
IG/QL/AM
120508
PRIMARY DOT 6
PRIMARY 4
SECONDARY DOT 1
SECONDARY 3
NOT USED 2
Features
• good return loss
• usable over 0.05-400 MHz
• excellent amplitude unbalance, 0.1 dB typ.
and phase unbalance, 2 deg typ. in 1 dB bandwidth
• plastic base with leads
Applications
• balanced to unbalanced transformation
• push-pull ampliers
Surface Mount
Typical Performance Data
Electrical Specifications
Config. C
Outline Dimensions ( )
inch
mm
Outline Drawing AT224-1
A
B
C
D
E
F
.150
.150
.160
.050
.040
.025
3.81 3.81 4.06 1.27 1.02 0.64
G
H
J
K
L
wt
.028
.065
.190
.030
.007
grams
0.71 1.65 4.83 0.76 0.18
0.15
Demo Board MCL P/N: TB-145
Suggested PCB Layout (PL-244)
Permanent damage may occur if any of these limits are exceeded.
PCB Land Pattern
Suggested Layout,
Tolerance to be within
±
.002
Lead #1 identifier shall be located in the cross-hatched area shown.
Identifier may be either a molded or marked feature.
INSERTION LOSS
0.0
0.5
1.0
1.5
2.0
2.5
0 50 100 150 200 250 300 350
FREQUENCY (MHz)
INSERTION LOSS (dB)
RETURN LOSS
0.0
10.0
20.0
30.0
40.0
50.0
0 50 100 150 200 250 300 350
FREQUENCY (MHz)
RETURN LOSS (dB)
+RoHS Compliant
The +Suffix identifies RoHS Compliance. See our web site
for RoHS Compliance methodologies and qualifications
Available Tape and Reel
at no extra cost
Reel Size Devices/Reel
7” 20, 50, 100, 200, 500
13” 1000, 2000
