IKW15N120T2 (R) TrenchStop 2 nd generation Series Low Loss DuoPack : IGBT in 2nd generation TrenchStop(R) technology with soft, fast recovery anti-parallel Emitter Controlled Diode C Short circuit withstand time - 10s Designed for : - Frequency Converters - Uninterrupted Power Supply (R) nd TrenchStop 2 generation for 1200 V applications offers : - very tight parameter distribution - high ruggedness, temperature stable behavior Easy paralleling capability due to positive temperature coefficient in VCE(sat) Low EMI Low Gate Charge Very soft, fast recovery anti-parallel Emitter Controlled HE Diode 1 Qualified according to JEDEC for target applications Pb-free lead plating; RoHS compliant Complete product spectrum and PSpice Models : http://www.infineon.com/igbt/ Type IKW15N120T2 G E PG-TO-247-3 VCE IC VCE(sat),Tj=25C Tj,max Marking Code Package 1200V 15A 1.75V 175C K15T1202 PG-TO-247-3 Maximum Ratings Parameter Symbol Value Unit Collector-emitter voltage VCE 1200 V DC collector current (Tj = 150C) IC A TC = 25C 30 TC = 110C 15 Pulsed collector current, tp limited by Tjmax ICpul s 60 Turn off safe operating area - 60 VCE 1200V, Tj 175C IF Diode forward current (Tj = 150C) TC = 25C 25 TC = 110C 15 Diode pulsed current, tp limited by Tjmax IFpul s 60 Gate-emitter voltage VGE 20 V tSC 10 s Ptot 235 W C Short circuit withstand time 2) VGE = 15V, VCC 600V, Tj, start 175C Power dissipation TC = 25C Operating junction temperature Tj -40...+175 Storage temperature Tstg -55...+150 Soldering temperature, 1.6mm (0.063 in.) from case for 10s - 260 Wavesoldering only, temperature on leads only 1 2) J-STD-020 and JESD-022 Allowed number of short circuits: <1000; time between short circuits: >1s. IFAG IPC TD VLS 1 Rev. 2.2 12.06.2013 IKW15N120T2 (R) TrenchStop 2 nd generation Series Thermal Resistance Parameter Symbol Conditions Max. Value Unit RthJC 0.63 K/W RthJCD 1.12 Characteristic IGBT thermal resistance, junction - case Diode thermal resistance, junction - case Thermal resistance, RthJA 40 junction - ambient Electrical Characteristic, at Tj = 25 C, unless otherwise specified Parameter Symbol Conditions Value min. typ. max. 1200 - - T j =2 5 C - 1.7 2.2 T j =1 5 0 C - 2.1 - T j =1 7 5 C - 2.2 - T j =2 5 C - 1.75 2.2 T j =1 5 0 C - 1.8 - T j =1 7 5 C - 1.75 - 5.2 5.8 6.4 Unit Static Characteristic Collector-emitter breakdown voltage V ( B R ) C E S V G E = 0V , I C = 5 00 A Collector-emitter saturation voltage VCE(sat) Diode forward voltage VF V V G E = 15 V , I C = 15 A V G E = 0V , I F = 1 5 A Gate-emitter threshold voltage VGE(th) I C = 0. 6m A, V C E = V G E Zero gate voltage collector current ICES V C E = 12 0 0V , V G E = 0V mA T j =2 5 C - - 0.4 T j =1 5 0 C - - 4.0 T j =1 7 5 C - - 20 Gate-emitter leakage current IGES V C E = 0V , V G E =2 0 V - - 600 nA Transconductance gfs V C E = 20 V , I C = 15 A - 8 - S IFAG IPC TD VLS 2 Rev. 2.2 12.06.2013 IKW15N120T2 (R) TrenchStop 2 nd generation Series Dynamic Characteristic Input capacitance Ciss V C E = 25 V , - 1000 - Output capacitance Coss V G E = 0V , - 100 - Reverse transfer capacitance Crss f= 1 MH z - 56 - Gate charge QGate V C C = 96 0 V, I C =1 5 A - 93 - nC - 13 - nH - A pF V G E = 15 V LE Internal emitter inductance measured 5mm (0.197 in.) from case Short circuit collector current 1) IC(SC) V G E = 15 V ,t S C 10 s V C C = 6 0 0 V, T j , s t a r t = 2 5 C Tj,start = 175C 82 60 Switching Characteristic, Inductive Load, at Tj=25 C Parameter Symbol Conditions Value min. typ. max. - 32 - - 25 - - 362 - - 95 - - 1.25 - - 0.8 - - 2.05 - Unit IGBT Characteristic Turn-on delay time td(on) Rise time tr Turn-off delay time td(off) Fall time tf Turn-on energy Eon Turn-off energy Eoff Total switching energy Ets T j =2 5 C , V C C = 60 0 V, I C = 1 5 A, V G E = 0/ 15 V , R G = 41 . 8, 2) L =1 2 6n H, 2) C = 3 4p F Energy losses include "tail" and diode reverse recovery. Diode reverse recovery time trr T j =2 5 C , - 300 Diode reverse recovery charge Qrr V R = 6 00 V , I F = 1 5 A, - 1.3 C Diode peak reverse recovery current Irrm d i F / d t =4 5 0 A/ s - 10 A Diode peak rate of fall of reverse recovery current during t b d i r r /d t - 215 ns mJ Anti-Parallel Diode Characteristic 1) 2) - ns A/s Allowed number of short circuits: <1000; time between short circuits: >1s. Leakage inductance L a nd Stray capacity C due to dynamic test circuit in Figure E. IFAG IPC TD VLS 3 Rev. 2.2 12.06.2013 IKW15N120T2 (R) TrenchStop 2 nd generation Series Switching Characteristic, Inductive Load, at Tj=175 C Parameter Symbol Conditions Value min. typ. max. - 31 - - 30 - - 450 - - 176 - - 1.5 - - 1.3 - - 2.8 - Unit IGBT Characteristic Turn-on delay time td(on) Rise time tr Turn-off delay time td(off) Fall time tf Turn-on energy Eon Turn-off energy Eoff Total switching energy Ets T j =1 7 5 C V C C = 60 0 V, I C = 1 5 A, V G E = 0/ 15 V , R G = 4 1. 8 , 1) L =3 1 5n H, 1) C = 3 4p F Energy losses include "tail" and diode reverse recovery. Diode reverse recovery time trr T j =1 7 5 C - 460 - ns Diode reverse recovery charge Qrr V R = 6 00 V , I F = 1 5 A, - 2.65 - C Diode peak reverse recovery current Irrm d i F / d t =4 6 0 A/ s - 13 - A Diode peak rate of fall of reverse recovery current during t b d i r r /d t - 123 ns mJ Anti-Parallel Diode Characteristic 1) A/s Leakage inductance L a nd Stray capacity C due to dynamic test circuit in Figure E. IFAG IPC TD VLS 4 Rev. 2.2 12.06.2013 IKW15N120T2 (R) TrenchStop 2 nd generation Series tp=3s IC, COLLECTOR CURRENT IC, COLLECTOR CURRENT 60A 40A TC=80C TC=110C Ic 20A 10s 10A 50s 150s 1A 500s Ic 20ms DC 0A 10Hz 0.1A 100Hz 1kHz 10kHz 1V 100kHz f, SWITCHING FREQUENCY Figure 1. Collector current as a function of switching frequency (Tj 175C, D = 0.5, VCE = 600V, VGE = 0/+15V, RG = 41.8) IC, COLLECTOR CURRENT Ptot, POWER DISSIPATION 100W 100V 1000V VCE, COLLECTOR-EMITTER VOLTAGE Figure 2. Safe operating area (D = 0, TC = 25C, Tj 175C;VGE=15V) 200W 150W 10V 30A 20A 10A 50W 0W 25C 50C 75C 100C 125C 0A 25C 150C TC, CASE TEMPERATURE Figure 3. Maximum power dissipation as a function of case temperature (Tj 175C) IFAG IPC TD VLS 5 75C 125C TC, CASE TEMPERATURE Figure 4. Maximum DC Collector current as a function of case temperature (VGE 15V, Tj 175C) Rev. 2.2 12.06.2013 IKW15N120T2 (R) TrenchStop 2 60A 20V VGE=17V 15V 40A 13V 11V 30A 9V 7V 20A 20V 50A IC, COLLECTOR CURRENT IC, COLLECTOR CURRENT generation Series 60A 50A 10A VGE=17V 15V 40A 13V 11V 30A 9V 7V 20A 10A 0A 0A 0V 1V 2V 3V 4V 0V VCE, COLLECTOR-EMITTER VOLTAGE Figure 5. Typical output characteristic (Tj = 25C) VCE(sat), COLLECTOR-EMITT SATURATION VOLTAGE 50A 40A 30A 20A 10A TJ=175C 25C 0A 0V 2V 4V 6V 8V 10V 12V 2V 3V 4V 3.0V IC=30A 2.5V 2.0V IC=15A 1.5V IC=7.5A 1.0V IC=2A 0.5V 0.0V 0C VGE, GATE-EMITTER VOLTAGE Figure 7. Typical transfer characteristic (VCE=20V) IFAG IPC TD VLS 1V VCE, COLLECTOR-EMITTER VOLTAGE Figure 6. Typical output characteristic (Tj = 175C) 60A IC, COLLECTOR CURRENT nd 50C 100C 150C TJ, JUNCTION TEMPERATURE Figure 8. Typical collector-emitter saturation voltage as a function of junction temperature (VGE = 15V) 6 Rev. 2.2 12.06.2013 IKW15N120T2 (R) TrenchStop 2 generation Series 1000 ns td(off) td(off) tf t, SWITCHING TIMES t, SWITCHING TIMES nd 100ns td(on) 10ns 100 ns td(on) 10 ns tr 7.5A 15.0A tf tr 22.5A IC, COLLECTOR CURRENT Figure 9. Typical switching times as a function of collector current (inductive load, TJ=175C, VCE=600V, VGE=0/15V, RG=41.8, Dynamic test circuit in Figure E) RG, GATE RESISTOR Figure 10. Typical switching times as a function of gate resistor (inductive load, TJ=175C, VCE=600V, VGE=0/15V, IC=15A, Dynamic test circuit in Figure E) VGE(th), GATE-EMITT TRSHOLD VOLTAGE t, SWITCHING TIMES td(off) 100ns tf td(on) tr 6.5V 6.0V 5.5V max. 5.0V 4.5V 4.0V typ. 3.5V min. 10ns 0C 50C 100C 150C TJ, JUNCTION TEMPERATURE Figure 11. Typical switching times as a function of junction temperature (inductive load, VCE=600V, VGE=0/15V, IC=15A, RG=41.8, Dynamic test circuit in Figure E) IFAG IPC TD VLS 0C 50C 100C 150C TJ, JUNCTION TEMPERATURE Figure 12. Gate-emitter threshold voltage as a function of junction temperature (IC = 600A) 7 Rev. 2.2 12.06.2013 IKW15N120T2 (R) TrenchStop 2 generation Series *) Eon and Ets include losses due to diode recovery *) Eon and Etsinclude losses due to diode recovery E, SWITCHING ENERGY LOSSES E, SWITCHING ENERGY LOSSES 7.5mJ nd Ets* 5.0mJ Eon* 2.5mJ Eoff 5.00 mJ Ets* 3.75 mJ Eon* 2.50 mJ Eoff 1.25 mJ 0.0mJ 7.5A 15.0A 22.5A 0.00 mJ IC, COLLECTOR CURRENT Figure 13. Typical switching energy losses as a function of collector current (inductive load, TJ=175C, VCE=600V, VGE=0/15V, RG=41.8, Dynamic test circuit in Figure E) Eon* 1.2mJ Eoff 0.0mJ 5.00mJ Ets* 3.75mJ Eon* 2.50mJ Eoff 1.25mJ 0.00mJ 400V 150C TJ, JUNCTION TEMPERATURE Figure 15. Typical switching energy losses as a function of junction temperature (inductive load, VCE=600V, VGE=0/15V, IC=15A, RG=41.8, Dynamic test circuit in Figure E) IFAG IPC TD VLS E, SWITCHING ENERGY LOSSES E, SWITCHING ENERGY LOSSES 2.4mJ 100C *) Eon and Ets include losses due to diode recovery Ets* 50C RG, GATE RESISTOR Figure 14. Typical switching energy losses as a function of gate resistor (inductive load, TJ=175C, VCE=600V, VGE=0/15V, IC=15A, Dynamic test circuit in Figure E) *) Eon and Ets include losses due to diode recovery 0C 500V 600V 700V VCE, COLLECTOR-EMITTER VOLTAGE Figure 16. Typical switching energy losses as a function of collector emitter voltage (inductive load, TJ=175C, VGE=0/15V, IC=15A, RG=41.8, Dynamic test circuit in Figure E) 8 Rev. 2.2 12.06.2013 IKW15N120T2 (R) TrenchStop 2 nd generation Series 960V 10V Ciss 100pF Coss 5V Crss 0V 10pF 0nC 25nC 50nC 0V 75nC 15s 10s 5s 0s 12V 14V 16V 20V 100A 75A 50A 25A 0A 18V VGE, GATE-EMITTETR VOLTAGE Figure 19. Short circuit withstand time as a function of gate-emitter voltage (VCE=600V, start at TJ175C) IFAG IPC TD VLS 10V VCE, COLLECTOR-EMITTER VOLTAGE Figure 18. Typical capacitance as a function of collector-emitter voltage (VGE=0V, f = 1 MHz) IC(sc), short circuit COLLECTOR CURRENT QGE, GATE CHARGE Figure 17. Typical gate charge (IC=15 A) tSC, SHORT CIRCUIT WITHSTAND TIME 1nF 240V c, CAPACITANCE VGE, GATE-EMITTER VOLTAGE 15V 12V 14V 16V 18V VGE, GATE-EMITTETR VOLTAGE Figure 20. Typical short circuit collector current as a function of gateemitter voltage (VCE 600V, Tj,start =175C) 9 Rev. 2.2 12.06.2013 IKW15N120T2 (R) 25A VCE 600V 20A 400V 15A 10A 200V 600V 10A IC 400V 200V 5A 5A VCE IC 0V 0A 0us 0.4us 0.8us 0 D=0.5 0.2 -1 10 K/W 0.1 0.05 0.02 0.01 -2 10 K/W R,(K/W) 0.143 0.217 0.258 0.017 , (s) 3.06*10-4 3.47*10-3 1.71*10-2 2.63*10-1 R1 R2 single pulse C 1 = 1 /R 1 C 2 = 2 /R 2 0.4us 0.8us 1.2us t, TIME Figure 22. Typical turn off behavior (VGE=15/0V, RG=41.8, Tj = 175C, Dynamic test circuit in Figure E) ZthJC, TRANSIENT THERMAL RESISTANCE 10 K/W 0V 0A 0us 1.2us t, TIME Figure 21. Typical turn on behavior (VGE=0/15V, RG=41.8, Tj = 175C, Dynamic test circuit in Figure E) ZthJC, TRANSIENT THERMAL RESISTANCE generation Series 15A IC, COLLECTOR CURRENT VCE, COLLECTOR-EMITTER VOLTAGE TrenchStop 2 nd 0 10 K/W D=0.5 R,(K/W) 0.291 0.434 0.363 0.028 0.2 0.1 , (s) 2.75*10-4 2.60*10-3 1.48*10-2 1.78*10-1 -1 10 K/W 0.05 R1 R2 0.02 0.01 C 1 = 1 /R 1 C 2 = 2 /R 2 single pulse -2 10s 100s 1ms 10ms tP, PULSE WIDTH 100ms Figure 23. IGBT transient thermal resistance (D = tp / T) IFAG IPC TD VLS 10 10 K/W 10s 100s 1ms tP, PULSE WIDTH 10ms 100ms Figure 24. Diode transient thermal impedance as a function of pulse width (D=tP/T) Rev. 2.2 12.06.2013 IKW15N120T2 (R) TrenchStop 2 nd generation Series 500ns 400ns 300ns TJ=175C 200ns TJ=25C 100ns Qrr, REVERSE RECOVERY CHARGE trr, REVERSE RECOVERY TIME 600ns 0ns 2C TJ=25C 1C 0C 400A/s 800A/s 1200A/s diF/dt, DIODE CURRENT SLOPE Figure 23. Typical reverse recovery time as a function of diode current slope (VR=600V, IF=15A, Dynamic test circuit in Figure E) 400A/s dirr/dt, DIODE PEAK RATE OF FALL OF REVERSE RECOVERY CURRENT 15A TJ=25C 10A 5A 0A 400A/s 800A/s 1200A/s diF/dt, DIODE CURRENT SLOPE Figure 25. Typical reverse recovery current as a function of diode current slope (VR=600V, IF=15A, Dynamic test circuit in Figure E) IFAG IPC TD VLS 11 1200A/s TJ=25C -600A/s 20A 800A/s diF/dt, DIODE CURRENT SLOPE Figure 24. Typical reverse recovery charge as a function of diode current slope (VR=600V, IF=15A, Dynamic test circuit in Figure E) TJ=175C Irr, REVERSE RECOVERY CURRENT TJ=175C 3C -500A/s -400A/s TJ=175C -300A/s -200A/s -100A/s -0A/s 400A/s 800A/s 1200A/s diF/dt, DIODE CURRENT SLOPE Figure 26. Typical diode peak rate of fall of reverse recovery current as a function of diode current slope (VR=600V, IF=15A, Dynamic test circuit in Figure E) Rev. 2.2 12.06.2013 IKW15N120T2 (R) TrenchStop 2 nd generation Series 60A TJ=25C 2.0V IF=30A 175C VF, FORWARD VOLTAGE IF, FORWARD CURRENT 50A 40A 30A 20A 15A 1.5V 7.5A 2A 1.0V 0.5V 10A 0A 0V 1V 0.0V 2V VF, FORWARD VOLTAGE Figure 27. Typical diode forward current as a function of forward voltage IFAG IPC TD VLS 12 0C 50C 100C 150C TJ, JUNCTION TEMPERATURE Figure 28. Typical diode forward voltage as a function of junction temperature Rev. 2.2 12.06.2013 IKW15N120T2 (R) TrenchStop 2 IFAG IPC TD VLS 13 nd generation Series Rev. 2.2 12.06.2013 IKW15N120T2 (R) TrenchStop 2 nd generation Series i,v tr r =tS +tF diF /dt Qr r =QS +QF tr r IF tS QS Ir r m tF QF 10% Ir r m dir r /dt 90% Ir r m t VR Figure C. Definition of diodes switching characteristics 1 2 r1 r2 n rn Tj (t) p(t) r1 r2 rn Figure A. Definition of switching times TC Figure D. Thermal equivalent circuit Figure E. Dynamic test circuit Figure B. Definition of switching losses IFAG IPC TD VLS 14 Rev. 2.2 12.06.2013 IKW15N120T2 (R) TrenchStop 2 nd generation Series Published by Infineon Technologies AG 81726 Munich, Germany (c) 2013 Infineon Technologies AG All Rights Reserved. Legal Disclaimer The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices, please contact the nearest Infineon Technologies Office (www.infineon.com). Warnings Due to technical requirements, components may contain dangerous substances. For information on the types in question, please contact the nearest Infineon Technologies Office. The Infineon Technologies component described in this Data Sheet may be used in life-support devices or systems and/or automotive, aviation and aerospace applications or systems only with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support, automotive, aviation and aerospace device or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. IFAG IPC TD VLS 15 Rev. 2.2 12.06.2013