PRODUCT BRIEF 100G Integrated Coherent Receiver Key Features CPRV2b2tA OIF-DPC-RX Type 2 Fully integrated dual polarization coherent receiver: Overview Polarization beam splitter Finisar's CPRV2b22A Integrated Coherent Receiver combines polarization beam splitting Optical 90 hybrids with optics for the signal and local oscillator inputs, two matched optical 90 hybrids with integrated balanced monolithically integrated balanced photodetectors, and four linear trans-impedance photodetectors amplifiers (TIAs) with differential outputs in a compact surface-mount package. At the Linear trans-impedance amplifiers with peak detector output Selectable automatic / manual gain control Signal monitor photodiode and variable optical attenuator (VOA) Conforms with OIF-DPC-RX-01.2 implementation agreement, Type 2 form factor signal input there is a monitor photodiode for input signal monitoring, as well as a variable optical attenuator (VOA). The receiver is available in both C- and L-band versions. The device separates the incoming signal in X and Y polarization channels. Optical 90 hybrids subsequently demodulate the incident signal for each polarization into its in-phase (I) and quadrature (Q) phase channels, relative to an external local oscillator laser source. The phase channels are converted to electrical signals by pairs of balanced photodetectors that are monolithically integrated with the optical 90 hybrids, and subsequently amplified by linear trans-impedance amplifiers (TIAs). The TIAs feature integrated peak detectors and support both manual and automatic gain control. Up to 32 Gbaud symbol rate The CPRV2b22A conforms to the OIF-DPC-RX-01.2 implementation agreement, Type 2 25 GHz bandwidth on each lane form factor. The Integrated Coherent Receiver is RoHS compliant per Directive 2011/65/EU. C- and L-band version available Applications 100 Gb/s DP-QPSK coherent transmission systems 200 Gb/s DP-16QAM coherent transmission systems OIF MSA 100G long-haul transmission modules CFP-DCO metro transmission modules Key Advantages High responsivity Compact footprint Integrated monitor photodiode and variable optical attenuator (VOA) 100G Integrated Coherent Receiver Block Diagram and Mechanical Dimensions 41 22 25 Operating Conditions Parameter Symbol Condition Min Typ Max Unit Case Temperature Tcase 0 +75 C Wavelength Range C-band CPRV2222A 1530 1570 nm L-band CPRV2122A 1570 1612 nm Average Optical Input Power Signal Psig DP-QPSK -18 0 dBm 5 % Supply Voltage 3.3 V Optical and Electrical Specifications 1) Parameter Symbol Condition Min DP-QPSK Baud Rate f3dB assuming full VGA range Average Photodiode Responsivity Ravg CW single input Common Mode Rejection Ratio 3 dB cut-off Frequency CMRRsig DC Imbalance 3) ISig DC ILO DC Phase Deviation Optical Return Loss ORL Power Consumption Pcon 2) Unit 32 Gbaud GHz 65 mA/W -25 dBe 2 -7.5 1550 nm Max 25 dB0 2 dB0 +7.5 deg 27 dB0 1000 Polarization Extinction Ratio for Sig & LO PER Typ 1600 20 mW dB0 Notes: 1) = 1550 nm, 23C 2) CMRR = 20 log(IPD/IPD) 3) 10*log(Rmax/Rmin) 1389 Moffett Park Drive Sunnyvale, CA 94089-1133 www.finisar.com Phone:+1-408-548-1000 Sales:+1-408-541-5690 Email: sales@finisar.com (c) 2015 Finisar Corporation. All rights reserved. Finisar is a registered trademark of Finisar Corporation. Features and specifications are subject to change without notice. 07/15 Visit Our Website