HMC241QS16 / 241QS16E v04.0404 Typical Applications Features The HMC241QS16 & HMC241QS16E are ideal for: RoHS Compliant Product * Base Stations & Portable Wireless Low Insertion Loss (2 GHz): 0.5 dB * CATV / DBS Single Positive Supply: Vdd = +5V * Wireless Local Loop Integrated 2:4 TTL Decoder * Test Equipment 16 Lead QSOP Package Functional Diagram General Description The HMC241QS16 & HMC241QS16E are general purpose low-cost non-reflective SP4T switches in 16-lead QSOP packages. Covering DC - 3.5 GHz, this switch offers high isolation and has a low insertion loss of 0.5 dB at 2 GHz. The switch offers a single positive bias and true TTL/CMOS compatibility. A 2:4 decoder is integrated on the switch requiring only 2 control lines and a positive bias to select each path, replacing 8 control lines normally required by GaAs SP4T switches. SWITCHES - SMT 10 Electrical Specifi cations, TA = +25 C, For TTL Control and Vdd = +5V in a 50 Ohm System Parameter Frequency Min. Typ. Max. Units 0.5 0.5 0.6 1.0 0.8 0.8 0.9 1.5 dB dB dB dB Insertion Loss DC - 1.0 GHz DC - 2.0 GHz DC - 2.5 GHz DC - 3.5 GHz Isolation DC - 1.0 GHz DC - 2.0 GHz DC - 2.5 GHz DC - 3.5 GHz 40 32 28 23 45 36 32 26 dB dB dB dB Return Loss "On State" DC - 2.5 GHz DC - 3.5 GHz 17 9 21 12 dB dB Return Loss RF1-4 "Off State" 0.3 - 3.5 GHz 0.5 - 2.5 GHz 8 12 12 16 dB dB Input Power for 1dB Compression 0.3 - 3.5 GHz 22 25 dBm Input Third Order Intercept (Two-Tone Input Power = +7 dBm Each Tone) 0.3 - 3.5 GHz 40 44 dBm Switching Characteristics 0.3 - 3.5 GHz 40 150 ns ns tRISE, tFALL (10/90% RF) tON, tOFF (50% CTL to 10/90% RF) 10 - 114 GaAs MMIC SP4T NON-REFLECTIVE SWITCH, DC - 3.5 GHz For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC241QS16 / 241QS16E v04.0404 GaAs MMIC SP4T NON-REFLECTIVE SWITCH, DC - 3.5 GHz Isolation 0 0 -0.5 -10 ISOLATION (dB) INSERTION LOSS (dB) Insertion Loss -1 -1.5 +25 C +85 C -40 C -2 RF1 RF2 RF3 RF4 -20 -30 -40 -50 -2.5 -60 -3 -70 0 1 2 3 4 0 1 2 FREQUENCY (GHz) 3 FREQUENCY (GHz) 10 SWITCHES - SMT Return Loss 0 RFC RF1-4 "On" RF1-4 "Off" RETURN LOSS (dB) -5 -10 -15 -20 -25 -30 0 1 2 3 4 4 FREQUENCY (GHz) Bias Voltage & Current Truth Table Vdd Range = +5.0 Vdc 10% Control Input Vdd (Vdc) Idd (Typ.) (mA) Idd (Max.) (mA) +5.0 4.0 7.0 TTL/CMOS Control Voltages State Bias Condition Low 0 to +0.8 Vdc @ 5uA Typ. High +2.0 to +5.0 Vdc @ 70 uA Typ. Signal Path State A B RFCOM to: LOW LOW RF1 HIGH LOW RF2 LOW HIGH RF3 HIGH HIGH RF4 NOTE: DC Blocking capacitors are required at ports RFC and RF1, 2, 3, 4. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 10 - 115 HMC241QS16 / 241QS16E v04.0404 GaAs MMIC SP4T NON-REFLECTIVE SWITCH, DC - 3.5 GHz Absolute Maximum Ratings Bias Voltage Range (Port Vdd) +7.0 Vdc Control Voltage Range (A & B) -0.5V to Vdd +1 Vdc Channel Temperature 150 C Thermal Resistance (Insertion Loss Path) 210 C/W Thermal Resistance (Terminated Path) 250 C/W Storage Temperature -65 to +150 C Operating Temperature -40 to +85 C Maximum Input Power Vdd = +5 Vdc +20 dBm (0.05 - 0.5 GHz) +27 dBm (0.5 - 3.5 GHz) ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS 10 SWITCHES - SMT Outline Drawing NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. Package Information Part Number Package Body Material Leadframe Plating MSL Rating HMC241QS16 Low Stress Injection Molded Plastic Silica and Silicon Impregnated Sn/Pb Solder MSL1 HMC241QS16E RoHS-compliant Low Stress Injection Molded Plastic Silica and Silicon Impregnated 100% Matte Tin MSL1 Package Marking [3] [1] HMC241 XXXX [2] HMC241 XXXX [1] Max peak reflow temperature of 235 C [2] Max peak reflow temperature of 260 C [3] 4-Digit lot number XXXX 10 - 116 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC241QS16 / 241QS16E v04.0404 GaAs MMIC SP4T NON-REFLECTIVE SWITCH, DC - 3.5 GHz Evaluation PCB SWITCHES - SMT 10 List of Materials for Evaluation PCB 102913 [1] Item Description J1 - J5 PCB Mount SMA RF Connector J6 - J9 DC Pin C1 - C5 330 pF capacitor, 0402 Pkg. U1 HMC241QS16 / HMC241QS16E SP4T Switch PCB [2] 102809 Evaluation PCB [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 The circuit board used in the final application should be generated with proper RF circuit design techniques. Signal lines at the RF port should have 50 ohm impedance and the package ground leads should be connected directly to the ground plane similar to that shown above. The evaluation circuit board shown above is available from Hittite Microwave Corporation upon request. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 10 - 117