PD410PI PD410PI High Speed Photodiode Features Outline Dimensions 0.2 2.0 0.2 R1.75 2.5 Rest of gate 0.4MAX. 2.4 8 8 2.15 17.15 +- 1.5 1.0 1. Infrared remote controllers for TVs, VCRs, audio equipment and air conditioners, etc. 1 8 0.4 0.2 1 3.75 8 0.5MIN. 0.45 2.54 2 1 Anode 2 Cathode Absolute Maximum Ratings Parameter Reverse voltage Power dissipation Operating temperature Storage temperature *1 Soldering temperature ( Ta = 25C ) Symbol VR P Topr Tstg Tsol Rating 32 150 - 25 to + 85 - 40 to + 100 260 Unit V mW C C C *1 For 5 seconds at the position of 2.15mm from the bottom face of resin package Electro-optical Characteristics Parameter Shortcircuit current Short-circuit current temperature coefficient Dark current Dark current temperature coefficient Terminal capacitance Peak sensitivity wavelength Peak spectral sensitivity Half intensity angle Response time 0.5 0.8 Applications 1.5 Black epoxy resin ( Visible light cut-off type ) 4.0 Detector center 5.0 0.2 1. Peak sensitivity wavelength matching with infrared LED( p= 1 000nm ) 2. Built-in visible light cut-off filter ( Unit : mm ) Symbol I SC T Id T Ct p K tr , t f ( Ta = 25C ) Conditions E V = 100 lx E V = 100 lx V R = 10V, E V = 0 V R = 10V, E V = 0 V R = 3V, f= 1MHz MIN. 2.5 - = 1000nm R L = 1k , VR = 10V - TYP. 3.0 0.2 0.5 3.5 20 1000 1 45 200 MAX. 4.5 10 5.0 35 - Unit A % /C nA times/10C pF nm A/W ns " In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that occur in equipment using any of SHARP's devices, shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest version of the device specification sheets before using any SHARP's device. " 2 PD410PI Fig. 1 Power Dissipation vs. Ambient Temperature Fig. 2 Spectral Sensitivity 200 100 Ta = 25C 80 150 Relative sensitivity(%) Power dissipation P ( mW ) 90 100 50 70 60 50 40 30 20 10 0 - 25 0 0 25 50 75 85 600 100 700 Ambient temperature Ta ( C ) Fig. 3 Dark Current vs. Ambient Temperature 800 900 1000 Wavelength ( nm ) 1100 1200 Fig. 4 Dark Current vs. Reverse Voltage 10 -7 10 - 6 VR = 10V T a = 25C 5 10 - 7 2 10 - 8 5 Dark current I d (A) Dark current I d ( A ) 10 -8 10 - 9 10 - 10 2 10 -9 5 2 10 -10 10 - 11 5 10 - 12 10 -11 2 - 25 0 25 50 75 Ambient temperature Ta ( C ) 100 5 10- 2 2 5 Fig. 6 Relative Output vs. Ambient Temperature ( Emitter : GL537 / GL538) Detector:PD410PI) Fig. 5 Terminal Capacitance vs. Reverse Voltage 60 160 f = 1MHz T a = 25C 140 50 Relative output ( % ) Terminal capacitance C t ( pF ) 5 10- 1 2 5 1 2 5 10 2 Reverse voltage VR ( V ) 40 30 20 ( Test circuit ) GL537 PD410Pl GL538 120 A 100 80 60 40 10 20 0 0.05 0.1 0.2 0.5 1 2 5 Reverse voltage VR ( V ) 10 20 50 0 - 25 Distance between infrared light emitting diode and photodiode shall be fixed when I SC = 100 A at I = 20mA and T a = 25C. 0 25 50 75 Ambient temperature Ta ( C ) F 100 PD410PI Fig. 7 Sensitivity Diagram - 20 - 10 0 Fig. 8 Relative Output vs. Distance (Emitter : GL537/ GL538, Detector :PD410PI) ( Ta = 25 C ) +10 +20 100 100 - 40 - 50 - 60 + 30 80 60 + 40 40 + 50 + 60 GL538 Relative output ( % ) Relative radiant intensity (%) - 30 10 GL537 1 20 - 70 + 70 - 80 + 80 + 90 - 90 0 IF = 20mA Ta = 25C 0.1 10 - 4 Angular displacement 10 -3 10 -2 10 -1 Distance between emitter and detector d (m ) Fig. 9 Responce Time vs. Load Resistance 10 2 5 VR = 10V Responce time t r , t f ( s ) 2 Test Circuit for Responce Time T a = 25C 10 1 5 2 Laser diode 10 0 IOUT = 0.1mA PD410PI + Output 5 2 10 Input 10V 90% Output -1 10% RL 5 Pulse generator 2 10 -2 10 2 5 10 2 2 5 10 3 2 5 10 4 2 5 10 5 Load resistance R L ( ) Please refer to the chapter "Precautions for Use. " tr tr Application Circuits NOTICE The circuit application examples in this publication are provided to explain representative applications of SHARP devices and are not intended to guarantee any circuit design or license any intellectual property rights. SHARP takes no responsibility for any problems related to any intellectual property right of a third party resulting from the use of SHARP's devices. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. SHARP reserves the right to make changes in the specifications, characteristics, data, materials, structure, and other contents described herein at any time without notice in order to improve design or reliability. Manufacturing locations are also subject to change without notice. Observe the following points when using any devices in this publication. SHARP takes no responsibility for damage caused by improper use of the devices which does not meet the conditions and absolute maximum ratings to be used specified in the relevant specification sheet nor meet the following conditions: (i) The devices in this publication are designed for use in general electronic equipment designs such as: --- Personal computers --- Office automation equipment --- Telecommunication equipment [terminal] --- Test and measurement equipment --- Industrial control --- Audio visual equipment --- Consumer electronics (ii)Measures such as fail-safe function and redundant design should be taken to ensure reliability and safety when SHARP devices are used for or in connection with equipment that requires higher reliability such as: --- Transportation control and safety equipment (i.e., aircraft, trains, automobiles, etc.) --- Traffic signals --- Gas leakage sensor breakers --- Alarm equipment --- Various safety devices, etc. (iii)SHARP devices shall not be used for or in connection with equipment that requires an extremely high level of reliability and safety such as: --- Space applications --- Telecommunication equipment [trunk lines] --- Nuclear power control equipment --- Medical and other life support equipment (e.g., scuba). Contact a SHARP representative in advance when intending to use SHARP devices for any "specific" applications other than those recommended by SHARP or when it is unclear which category mentioned above controls the intended use. If the SHARP devices listed in this publication fall within the scope of strategic products described in the Foreign Exchange and Foreign Trade Control Law of Japan, it is necessary to obtain approval to export such SHARP devices. This publication is the proprietary product of SHARP and is copyrighted, with all rights reserved. Under the copyright laws, no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, in whole or in part, without the express written permission of SHARP. Express written permission is also required before any use of this publication may be made by a third party. Contact and consult with a SHARP representative if there are any questions about the contents of this publication. 115