Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. Single-Channel: 6N135, 6N136, HCPL2503, HCPL4502 Dual-Channel: HCPL2530, HCPL2531 High Speed Transistor Optocouplers Features Description High speed -1 MBit/s The HCPL4502, HCPL2503, 6N135, 6N136, HCPL2530 and HCPL2531 optocouplers consist of an AlGaAs LED optically coupled to a high speed photodetector transistor. Superior CMR - 10kV/s Dual-Channel HCPL2530/HCPL2531 Double working voltage - 480V RMS A separate connection for the bias of the photodiode improves the speed by several orders of magnitude over conventional phototransistor optocouplers by reducing the base-collector capacitance of the input transistor. CTR guaranteed 0-70C U.L. recognized (File # E90700) Applications An internal noise shield provides superior common mode rejection of 10kV/s. An improved package allows superior insulation permitting a 480V working voltage compared to industry standard of 220V. Line receivers Pulse transformer replacement Output interface to CMOS-LSTTL-TTL Wide bandwidth analog coupling Schematics N/C 1 Package Outlines 8 VCC 8 VCC + 1 8 V F1 + 2 V 7 VB _ 1 2 7 V01 3 6 V02 F _ 3 6 VO _ 8 8 V F2 N/C 4 5 GND 6N135, 6N136, HCPL2503, HCPL4502 1 + 4 5 GND 1 HCPL2530/HCPL2531 Pin 7 is not connected in Part Number HCPL4502 (c)2005 Fairchild Semiconductor Corporation 6N135, 6N136, HCPL2503, HCPL4502, HCPL2530, HCPL2531 Rev. 1.0.7 www.fairchildsemi.com Single-Channel: 6N135, 6N136 , HCPL2503, HCPL4502 Dual-Channel: HCPL2530, HCPL2531 -- High Speed Transistor Optocouplers August 2008 Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol Parameter Condition Value Units TSTG Storage Temperature -55 to +125 C TOPR Operating Temperature -55 to +100 C TSOL Lead Solder Temperature 260 for 10 sec C IF (avg) DC/Average Forward Input Current Each Channel(1) 25 mA IF (pk) Peak Forward Input Current Each Channel(2) 50% duty cycle, 1ms P.W. 50 mA IF (trans) Peak Transient Input Current Each Channel 1s P.W., 300pps 1.0 A VR Reverse Input Voltage Each Channel 5 V PD Input Power Dissipation Each Channel 6N135/6N136 and HCPL2503/4502 100 mW HCPL-2530/253(3) 45 EMITTER DETECTOR IO (avg) Average Output Current Each Channel 8 mA IO (pk) Peak Output Current Each Channel 16 mA VEBR Emitter-Base Reverse Voltage 5 V VCC Supply Voltage -0.5 to 30 V VO Output Voltage -0.5 to 20 V IB Base Current 6N135, 6N136 and HCPL2503 only 5 mA PD Output Power Dissipation Each Channel 6N135, 6N136, HCPL2503, HCPL4502(4) 100 mW HCPL2530, HCPL2531 35 mW 6N135, 6N136 and HCPL2503 only Notes: 1. Derate linearly above 70C free-air temperature at a rate of 0.8mA/C. 2. Derate linearly above 70C free-air temperature at a rate of 1.6mA/C. 3. Derate linearly above 70C free-air temperature at a rate of 0.9 mW/C. 4. Derate linearly above 70C free-air temperature at a rate of 2.0 mW/C. (c)2005 Fairchild Semiconductor Corporation 6N135, 6N136, HCPL2503, HCPL4502, HCPL2530, HCPL2531 Rev. 1.0.7 www.fairchildsemi.com 2 Single-Channel: 6N135, 6N136 , HCPL2503, HCPL4502 Dual-Channel: HCPL2530, HCPL2531 -- High Speed Transistor Optocouplers Absolute Maximum Ratings (TA = 25C unless otherwise specified) Individual Component Characteristics Symbol Parameter Test Conditions Device Min. Typ.* Max. Unit 1.7 V EMITTER VF Input Forward Voltage IF = 16mA, TA =25C 1.45 IF = 16mA Input Reverse Breakdown Voltage IR = 10 A VF/TA Temperature Coefficient of Forward Voltage IF = 16mA BVR 1.8 5.0 V -1.6 mV/C DETECTOR IOH ICCL ICCH Logic High Output Current Logic Low Supply Current Logic High Supply Current IF = 0mA, VO = VCC = 5.5V, TA =25C All 0.001 0.5 IF = 0mA, VO = VCC = 15V, TA =25C 6N135 6N136 HCPL4502 HCPL2503 0.005 1 IF = 0mA, VO = VCC = 15V All A 50 IF = 16mA, VO = Open, VCC = 15V 6N135 6N136 HCPL4502 HCPL2503 120 200 IF1 = IF2 = 16mA, VO = Open, VCC = 15V HCPL2530 HCPL2531 200 400 IF = 0mA, VO = Open, VCC = 15V, TA =25C 6N135 6N136 HCPL4502 HCPL2503 1 IF = 0mA, VO = Open, VCC = 15V 6N135 6N136 HCPL4502 HCPL2503 2 IF = 0mA, VO = Open, VCC = 15V HCPL2530 HCPL2531 0.02 A A 4 *All Typicals at TA = 25C (c)2005 Fairchild Semiconductor Corporation 6N135, 6N136, HCPL2503, HCPL4502, HCPL2530, HCPL2531 Rev. 1.0.7 www.fairchildsemi.com 3 Single-Channel: 6N135, 6N136 , HCPL2503, HCPL4502 Dual-Channel: HCPL2530, HCPL2531 -- High Speed Transistor Optocouplers Electrical Characteristics (TA = 0 to 70C Unless otherwise specified) Transfer Characteristics Symbol Parameter Test Conditions Device Min. Typ.* Max. Unit COUPLED CTR Current Transfer Ratio(5) IF = 16mA, VO = 0.4 V, VCC = 4.5V, TA =25C IF = 16mA, VCC = 4.5V VOL Logic LOW Output Voltage 6N135 HCPL2530 7 18 50 % 6N136 HCPL4502 HCPL2531 19 27 50 % HCPL2503 12 27 % VOL = 0.4V 6N135 5 21 % VOL = 0.5V HCPL2530 VOL = 0.4V 6N136 HCPL4502 15 30 % VOL = 0.5V HCPL2531 VOL = 0.4V HCPL2503 9 30 % IF = 16mA, IO = 1.1mA, VCC = 4.5V, TA =25C HCPL2530 0.18 0.5 IF = 16mA, IO = 3mA, VCC = 4.5V, TA =25C 6N136 HCPL2503 0.25 0.4 HCPL2531 0.25 6N135 0.18 0.4 V 0.5 IF = 16mA, IO = 0.8mA, VCC = 4.5V 6N135 HCPL2530 0.5 IF = 16mA, IO = 2.4mA, VCC = 4.5V HCPL4502 HCPL2531 0.5 *All Typicals at TA = 25C Note: 5. Current Transfer Ratio is defined as a ratio of output collector current, IO, to the forward LED input current, IF, times 100%. (c)2005 Fairchild Semiconductor Corporation 6N135, 6N136, HCPL2503, HCPL4502, HCPL2530, HCPL2531 Rev. 1.0.7 www.fairchildsemi.com 4 Single-Channel: 6N135, 6N136 , HCPL2503, HCPL4502 Dual-Channel: HCPL2530, HCPL2531 -- High Speed Transistor Optocouplers Electrical Characteristics (Continued) (TA = 0 to 70C unless otherwise specified) Switching Characteristics (VCC = 5V) Symbol Parameter TPHL TPLH |CMH| |CML| Propagation Delay Time to Logic LOW Test Conditions Device Min. Typ.* Max. Unit TA = 25C, RL = 4.1k, IF = 16mA(6) (Fig. 7) 6N135 HCPL2530 0.45 1.5 s RL = 1.9k, IF = 16mA, TA = 25C(7) (Fig. 7) 6N136 HCPL4502 HCPL2503 HCPL2531 0.45 0.8 s RL = 4.1k, IF = 16mA(6) (Fig. 7) 6N135 HCPL2530 2.0 s RL = 1.9k, IF = 16mA(7) (Fig. 7) 6N136 HCPL4502 HCPL2503 HCPL2531 1.0 s TA = 25C, (RL = 4.1k, IF = 16mA(6) (Fig. 7) 6N135 HCPL2530 0.5 1.5 s RL = 1.9k, IF = 16mA(7) (Fig. 7) TA = 25C 6N136 HCPL4502 HCPL2503 HCPL2531 0.3 0.8 s RL = 4.1k, IF = 16mA(6) (Fig. 7) 6N135 HCPL2530 2.0 s RL = 1.9k, IF = 16mA(7) (Fig. 7) 6N136 HCPL4502 HCPL2503 HCPL2531 1.0 s Common Mode Transient Immunity at Logic High IF = 0mA, VCM = 10VP-P, RL = 4.1k, TA = 25C(8) (Fig. 8) 6N135 HCPL2530 10,000 V/s IF = 0mA, VCM = 10VP-P, RL = 1.9k, TA = 25C(8) (Fig. 8) 6N136 HCPL4502 HCPL2503 HCPL2531 10,000 V/s Common Mode Transient Immunity at Logic Low IF = 16mA, VCM = 10 VP-P, RL = 4.1k, TA = 25C(8) (Fig. 8) 6N135 HCPL2530 10,000 V/s IF = 16mA, VCM = 10 VP-P, RL = 1.9k(8) (Fig. 8) 6N136 HCPL4502 HCPL2503 HCPL2531 10,000 V/s Propagation Delay Time to Logic HIGH ** All Typicals at TA = 25C Notes: 6. The 4.1k load represents 1 LSTTL unit load of 0.36mA and 6.1k pull-up resistor. 7. The 1.9k load represents 1 TTL unit load of 1.6mA and 5.6k pull-up resistor. 8. Common mode transient immunity in logic high level is the maximum tolerable (positive) dVcm/dt on the leading edge of the common mode pulse signal VCM, to assure that the output will remain in a logic high state (i.e., VO > 2.0V). Common mode transient immunity in logic low level is the maximum tolerable (negative) dVcm/dt on the trailing edge of the common mode pulse signal, VCM, to assure that the output will remain in a logic low state (i.e., VO < 0.8V). (c)2005 Fairchild Semiconductor Corporation 6N135, 6N136, HCPL2503, HCPL4502, HCPL2530, HCPL2531 Rev. 1.0.7 www.fairchildsemi.com 5 Single-Channel: 6N135, 6N136 , HCPL2503, HCPL4502 Dual-Channel: HCPL2530, HCPL2531 -- High Speed Transistor Optocouplers Electrical Characteristics (Continued) (TA = 0 to 70C unless otherwise specified) Isolation Characteristics (TA = 0 to 70C Unless otherwise specified) Symbol II-O Characteristics Test Conditions Input-Output Insulation Leakage Current Relative humidity = 45%, TA = 25C, t = 5s, VI-O = 3000 VDC(9) VISO Withstand Insulation Test Voltage RH 50%, TA = 25C, II-O 2A, t = 1 min.(9) RI-O Resistance (Input to Output) VI-O = 500VDC(9) 1MHz(9) CI-O Capacitance (Input to Output) f= HFE DC Current Gain IO = 3mA, VO = 5V(9) II-I Input-Input Insulation Leakage RH 45%, VI-I = 500VDC(10) Current t = 5 s, (HCPL2530/2531 only) RI-I Input-Input Resistance CI-I Input-Input Capacitance Min Typ** 2500 Max Unit 1.0 A VRMS 1012 0.6 pF 150 0.005 A VI-I = 500 VDC(10) (HCPL2530/2531 only) 1011 f = 1MHz)(10) (HCPL2530/2531 only) 0.03 pF Notes: 9. Device is considered a two terminal device: Pins 1, 2, 3 and 4 are shorted together and Pins 5, 6, 7 and 8 are shorted together. 10. Measured between pins 1 and 2 shorted together, and pins 3 and 4 shorted together. (c)2005 Fairchild Semiconductor Corporation 6N135, 6N136, HCPL2503, HCPL4502, HCPL2530, HCPL2531 Rev. 1.0.7 www.fairchildsemi.com 6 Single-Channel: 6N135, 6N136 , HCPL2503, HCPL4502 Dual-Channel: HCPL2530, HCPL2531 -- High Speed Transistor Optocouplers Electrical Characteristics (Continued) (TA = 0 to 70C unless otherwise specified) Fig. 2 Normalized CTR vs. Temperature 1.2 1.0 1.0 NORMALIZED CTR NORMALIZED CTR Fig. 1 Normalized CTR vs. Forward Current 1.2 0.8 0.6 0.4 VO = 0.4 V VCC = 5 V TA = 25C Normalized to: IF = 16 mA 0.2 0.0 0.1 1 0.8 0.6 0.4 0.2 10 0.0 -60 100 -40 -20 IF - FORWARD CURRENT (mA) IOH - LOGIC HIGH OUTPUT CURRENT (nA) IO - OUTPUT CURRENT (mA) IF = 40mA IF = 35mA 12 IF = 30mA 10 IF = 25mA 8 IF = 20mA 6 IF = 15mA 4 IF = 10mA 2 IF = 5mA 2 4 6 8 10 12 14 40 60 80 100 16 18 80 100 1000 IF = 0 mA VCC = 5 V VO = 5 V 100 10 1 0.1 -60 0 0 20 Fig. 4 Logic High Output Current vs. Temperature 16 14 0 TA - TEMPERATURE (C) Fig. 3 Output Current vs. Output Voltage TA = 25C VCC = 5 V IF = 16mA VCC = 5 V VO = 0.4 V Normalized to: TA = 25C 20 -40 -20 0 20 40 60 TA - TEMPERATURE (C) VO - OUTPUT VOLTAGE (V) Fig. 6 Propagation Delay vs. Load Resistance Fig. 5 Propagation Delay vs. Temperature 800 10000 600 TP - PROPAGATION DELAY (ns) Tp - PROPAGATION DELAY (ns) 700 RL = 4.1k (TPLH) 500 RL = 4.1k (TPLH) 400 RL = 1.9k (TPHL) 300 RL = 1.9k (TPLH) 200 IF = 16mA VCC = 5 V 100 0 -60 -40 -20 0 20 40 60 80 IF - 16mA (TPHL) IF - 16mA (TPLH) IF - 10mA (TPLH) VCC = 5 V TA = 25C 100 100 1 TA - TEMPERATURE (C) 10 RL - LOAD RESISTANCE (k) (c)2005 Fairchild Semiconductor Corporation 6N135, 6N136, HCPL2503, HCPL4502, HCPL2530, HCPL2531 Rev. 1.0.7 IF - 10mA (TPHL) 1000 www.fairchildsemi.com 7 Single-Channel: 6N135, 6N136 , HCPL2503, HCPL4502 Dual-Channel: HCPL2530, HCPL2531 -- High Speed Transistor Optocouplers Typical Performance Curves Pulse Generator I F tr = 5ns Z O = 50 10% D.C. I/f < 100s 1 Noise Shield 8 + 2 7 VF - 3 6 VCC VB Pulse Generator tr = 5ns Z O = 50 +5 V 10% DUTY CYCLE I/f < 100S RL VO IF MONITOR 0.1 F 4 5 1 Test Circuit for 6N135, 6N136, HCPL-2503 and HCPL- 4502 8 VCC +5 V RL VF1 - 7 2 V01 VO C L = 1.5 F 3 6 4 5 VF2 + Rm C L = 1.5 F GND Noise Shield + - VO I F Monitor Rm IF V02 0.1 F GND Test Circuit for HCPL-2530 and HCPL-2531 IF 0 5V VO 1.5 V 1.5 V VOL TPHL TPLH Fig. 7 Switching Time Test Circuit IF 1 Noise Shield 8 + 2 A B 7 VCC + +5 V IF VB VF1 - RL Noise Shield 1 8 VCC +5 V RL 2 7 3 6 4 5 V01 VO A VF - 3 6 VO B VO VFF 0.1 F VFF 4 5 + GND VF2 + - V02 0.1 F GND VCM - + Pulse Gen VCM - Pulse Gen Test Circuit for 6N135, 6N136, HCPL-2503 and HCPL-4502 Test Circuit for HCPL-2530 and HCPL-2531 VCM 10 V 0V 90% 90% 10% 10% tr tf VO 5V Switch at A : IF = 0 mA VO VOL Switch at A : IF = 16 mA Fig. 8 Common Mode Immunity Test Circuit (c)2005 Fairchild Semiconductor Corporation 6N135, 6N136, HCPL2503, HCPL4502, HCPL2530, HCPL2531 Rev. 1.0.7 www.fairchildsemi.com 8 Single-Channel: 6N135, 6N136 , HCPL2503, HCPL4502 Dual-Channel: HCPL2530, HCPL2531 -- High Speed Transistor Optocouplers Test Circuits Option Example Part Number Description S 6N135S SD 6N135SD W 6N135W 0.4" Lead Spacing V 6N135V VDE0884 WV 6N135WV VDE0884; 0.4" lead spacing SV 6N135SV VDE0884; surface mount SDV 6N135SDV Surface Mount Lead Bend Surface Mount; Tape and reel VDE0884; surface mount; tape and reel Marking Information 1 V 3 2503 2 XX YY T1 6 4 5 Definitions 1 Fairchild logo 2 Device number 3 VDE mark (Note: Only appears on parts ordered with VDE option - See order entry table) 4 Two digit year code, e.g., `03' 5 Two digit work week ranging from `01' to `53' 6 Assembly package code (c)2005 Fairchild Semiconductor Corporation 6N135, 6N136, HCPL2503, HCPL4502, HCPL2530, HCPL2531 Rev. 1.0.7 www.fairchildsemi.com 9 Single-Channel: 6N135, 6N136 , HCPL2503, HCPL4502 Dual-Channel: HCPL2530, HCPL2531 -- High Speed Transistor Optocouplers Ordering Information 12.0 0.1 4.90 0.20 4.0 0.1 O1.55 0.05 4.0 0.1 0.30 0.05 1.75 0.10 7.5 0.1 13.2 0.2 10.30 0.20 O1.6 0.1 10.30 0.20 0.1 MAX 16.0 0.3 User Direction of Feed Reflow Profile Temperature (C) 300 215 C, 10-30 s 250 225 C peak 200 150 Time above 183C, 60-150 sec 100 50 Ramp up = 3C/sec 0 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 Time (Minute) * Peak reflow temperature: 225C (package surface temperature) * Time of temperature higher than 183C for 60-150 seconds * One time soldering reflow is recommended (c)2005 Fairchild Semiconductor Corporation 6N135, 6N136, HCPL2503, HCPL4502, HCPL2530, HCPL2531 Rev. 1.0.7 www.fairchildsemi.com 10 Single-Channel: 6N135, 6N136 , HCPL2503, HCPL4502 Dual-Channel: HCPL2530, HCPL2531 -- High Speed Transistor Optocouplers Tape Specifications ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com (c) Semiconductor Components Industries, LLC N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5817-1050 www.onsemi.com 1 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative www.onsemi.com