236 Catalog E 07/10 Edition 1 www.erni.com
2.0 mm ERmet Hard Metric Connector System
Shrouds Type A for Backplanes
Dimensional drawings
The ERmet shroud type A is possible for a maximum of 175
contacts in 7 rows by 25 positions. The two outer rows, z
and f are for the shielding contacts of the female connector.
This type contains a multifunction block for coding and pre-
alignment which uses 3 positions.
For CompactPCI applications the shroud type A is used on
the position rP1 and rP4.
Note: All dimensions in mm.
11.6
14.8
2
8
2
10 x 2 = 20 10 x 2 = 20
49.9
2
6 x 2 = 12
3.8
3.15
3.9
14.35
H
HIdent-Nr. / Part No.
14.35
14.95
15.75
16.55
114436
054795
054794
054793
Sammelzeichnung
Combination Drawing
Catalog E 07/10 Edition 1 www.erni.com 237
2.0 mm ERmet Hard Metric Connector System
Shrouds Type A for Backplanes
2.0 mm ERmet
Type A Shroud 25 Positions
Ordering Information
Part NumberUsed For
Height 14.35
Configuration
114436
rP1, rP4
No. of
Pins
Type A Shroud 25 Positions Height 14.95
054795
rP1, rP4
Type A Shroud 25 Positions Height 15.75
054794
rP1, rP4
Type A Shroud 25 Positions Height 16.55
054793
rP1, rP4
238 Catalog E 07/10 Edition 1 www.erni.com
2.0 mm ERmet Hard Metric Connector System
Shrouds Type A for Backplanes
Type A Shroud 19 Positions
Ordering Information
Part NumberUsed For
Height 14.35
Configuration
124312
No. of
Pins
Type A Shroud 19 Positions Height 14.95
923109
Type A Shroud 19 Positions Height 15.75
923108
Type A Shroud 19 Positions Height 16.55
923107
