E M C C o m p o n e n t s Common mode filters High-speed differential signal line(USB2.0, LVDS, etc.) MCZ-AH series RoHS REACH SVHC-Free Cl Br Pb Halogen Free Lead Free MCZ1210AH type FEATURES Compact multilayer common mode filter. Has EMC suppression by achieving wide frequency range differential mode transmission while ensuring common mode impedance with virtually no affect on the high-speed differential transmission line signal. Operating temperature range: -40 to +85C APPLICATION Electronic equipment high-speed interface (LVDS, USB2.0, MHL) Mobile phones, PCs, DSCs, portable game machines, etc. PDP/LCD/DLP/PJ TVs, DVD players, DVCs, mobile audio, etc. Application guides: Smart phones/tablets PART NUMBER CONSTRUCTION MCZ 1210 AH 360 L2 T A0G Series name LxWxT dimensions 1.25x1.0x0.5 mm Product internal code Impedance () at 100MHz Number of lines Packaging style Internal code CHARACTERISTICS SPECIFICATION TABLE Common mode impedance DC resistance Rated current Rated voltage Insulation resistance [100MHz] ( ) 36 90 200 300 [1 line] ( )max. 1.00 1.75 4.00 4.50 (mA)max. 200 100 100 100 (V)max. 5 5 5 5 (M )min. 10 10 10 10 Tolerance 25% 25% 25% 25% Part No. MCZ1210AH360L2TA0G MCZ1210AH900L2TA0G MCZ1210AH201L2TA0G MCZ1210AH301L2TA0G Measurement equipment Measurement item Product No. Common mode impedance E4991A+16192A DC resistance Type-7561 Insulation resistance 4339B Equivalent measurement equipment may be used. Manufacturer Keysight Technologies Yokogawa Keysight Technologies Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (1/4) 20181031 cmf_commercial_signal_mcz1210ah_en.fm E M C C o m p o n e n t s MCZ1210AH type IMPEDANCE VS. FREQUENCY CHARACTERISTICS 10000 1000 Impedance () 301 Common mode 201 Common mode 900 Common mode 100 360 Common mode 301 Differential mode 10 201 Differential mode 900 Differential mode 360 Differential mode 1 1 10 100 Frequency (MHz) 1000 10000 Measurement equipment Product No. Manufacturer E4991A+16192A Keysight Technologies Equivalent measurement equipment may be used. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (2/4) 20181031 cmf_commercial_signal_mcz1210ah_en.fm E M C C o m p o n e n t s MCZ1210AH type SHAPE & DIMENSIONS PACKAGING STYLE REEL DIMENSIONS 1.00.15 0.550.1 3 E 2.00.5 1.250.15 4 o60min. 2 0.50.1 1 0.30.1 1.0 Dimensions in mm 8.4 +2.0 -0.0 o130.2 o210.8 RECOMMENDED LAND PATTERN 14.4max. o1802.0 0.3 0.5 Dimensions in mm 2.00.05 4.00.1 8.00.3 1.5 +0.1 -0 3.50.05 Sprocket hole 0.250.05 1.750.1 0.7 to 0.75 TAPE DIMENSIONS B 0.25 Dimensions in mm K A Cavity 4.00.1 CIRCUIT DIAGRAM 4 Dimensions in mm Type MCZ1210AH 3 160min. 1 A 1.150.1 Taping B 1.40.1 K 1.0max. 200min. 2 * No polarity 300min. Drawing direction RECOMMENDED REFLOW PROFILE Preheating Soldering Dimensions in mm Natural cooling PACKAGE QUANTITY Package quantity Peak 4,000 pcs/reel 250 to 260C Temperature 230C 230C TEMPERATURE RANGE, INDIVIDUAL WEIGHT Operating Storage temperature range temperature range -40 to +85 C -40 to +85 C The storage temperature range is for after the assembly. 180C Individual weight 3.0 mg 10s max. 150C 60 to 120s 30 to 60s Time Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (3/4) 20181031 cmf_commercial_signal_mcz1210ah_en.fm E M C C o m p o n e n t s REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY REMINDERS Please pay sufficient attention to the warnings for safe designing when using this products. REMINDERS The storage period is less than 12 months. Be sure to follow the storage conditions (temperature: 5 to 40C, humidity: 10 to 75% RH or less). If the storage period elapses, the soldering of the terminal electrodes may deteriorate. Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.). Before soldering, be sure to preheat components. The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature does not exceed 150C. Soldering corrections after mounting should be within the range of the conditions determined in the specifications. If overheated, a short circuit, performance deterioration, or lifespan shortening may occur. When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions. Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal design. Carefully lay out the coil for the circuit board design of the non-magnetic shield type. A malfunction may occur due to magnetic interference. Use a wrist band to discharge static electricity in your body through the grounding wire. Do not expose the products to magnets or magnetic fields. Do not use for a purpose outside of the contents regulated in the delivery specifications. The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equipment, industrial robots) under a normal operation and use condition. The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society, person or property. If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions set forth in the each catalog, please contact us. (1) Aerospace/aviation equipment (2) Transportation equipment (cars, electric trains, ships, etc.) (3) Medical equipment (4) Power-generation control equipment (5) Atomic energy-related equipment (6) Seabed equipment (7) Transportation control equipment (8) Public information-processing equipment (9) Military equipment (10) Electric heating apparatus, burning equipment (11) Disaster prevention/crime prevention equipment (12) Safety equipment (13) Other applications that are not considered general-purpose applications When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing protection circuit/device or providing backup circuits in your equipment. Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. (4/4) 20181031 cmf_commercial_signal_mcz1210ah_en.fm