Max. 79 m /h DC axial fans 3 80 x 25 mm Housing: GRP1) (PBT) Impeller: GRP1) (PA) Direction of air flow: Exhaust over struts Direction of rotation: Counterclockwise, looking towards rotor Connection: Via single wires AWG 24, TR 64 Highlights: Some models are suitable for use at high ambient temperatures up to 85 C. Weight: 95 g - Material: - - - - - - Possible special versions: (See chapter DC fans - specials) - Speed signal - Go / NoGo alarm - Alarm with speed limit - External temperature sensor - Internal temperature sensor - PWM control input - Analog control input - Moisture protection - Degree of protection: IP 54 / IP 68 cfm VDC VDC 8412 NGLE 33 19.4 12 8...15 12 3.5 0.5 1 500 -20...+85 80 000 / 27 500 135 000 8412 NLE 33 19.4 12 8...15 17 3.7 0.3 1 500 -20...+85 80 000 / 27 500 135 000 8412 NGMLE 45 26.5 12 8...15 19 3.9 0.9 2 050 -20...+80 80 000 / 32 500 135 000 8412 NMLE 45 26.5 12 8...15 21 4.0 0.6 2 050 -20...+85 80 000 / 27 500 135 000 8412 NGME 58 34.1 12 8...15 26 4.3 1.4 2 600 -20...+75 80 000 / 35 000 135 000 8412 NME 58 34.1 12 8...15 27 4.4 1.0 2 600 -20...+75 80 000 / 35 000 135 000 8412 NG 69 40.6 12 8...15 32 4.7 2.0 3 100 -20...+70 70 000 / 35 000 117 500 8412 N 69 40.6 12 8...15 32 4.7 1.7 3 100 -20...+70 70 000 / 35 000 117 500 8412 NH 79 46.5 12 8...13.2 37 5.0 2.1 3 600 -20...+70 70 000 / 35 000 117 500 8412 NH-217 79 46.5 12 8...15 37 5.0 2.5 3 600 -20...+70 70 000 / 35 000 117 500 8414 NGL 33 19.4 24 18...28 12 3.5 0.9 1 500 -20...+70 80 000 / 40 000 135 000 8414 NL 33 19.4 24 18...28 17 3.7 0.8 1 500 -20...+70 80 000 / 40 000 135 000 8414 NGML 45 26.5 24 18...28 19 3.9 1.2 2 050 -20...+70 80 000 / 40 000 135 000 8414 NML 45 26.5 24 18...28 21 4.0 1.1 2 050 -20...+70 80 000 / 40 000 135 000 8414 NGM 58 34.1 24 18...28 26 4.3 1.4 2 600 -20...+70 80 000 / 40 000 135 000 8414 NM 58 34.1 24 18...28 27 4.4 1.4 2 600 -20...+70 80 000 / 40 000 135 000 8414 NG 69 40.6 24 18...28 32 4.7 2.2 3 100 -20...+70 70 000 / 35 000 117 500 8414 N 69 40.6 24 18...28 32 4.7 1.8 3 100 -20...+70 70 000 / 35 000 117 500 8414 NH 79 46.5 24 18...26 37 5.0 2.4 3 600 -20...+70 70 000 / 35 000 117 500 8414 NH-221 79 46.5 24 18...28 37 5.0 2.2 3 600 -20...+70 70 000 / 35 000 117 500 8418 N 69 40.6 48 36...56 32 4.7 2.0 3 100 -20...+70 70 000 / 35 000 117 500 Type dB(A) Bel(A) Tin-p la Air performance measured according to: ISO 5801. Installation category A, without contact protection. Noise: Total sound power level LWA ISO 103002 measured on a hemisphere with a radius of 2 m. Sound pressure level LpA measured at 1 m distance from fan axis. The values given are applicable only under the specified measuring conditions and may differ depending on the installation conditions. In the event of deviation from the standard configuration, the parameters must be checked after installation! For detailed information see http://www.ebmpapst.com/general conditions 44 Finger guards from p. 242 ted Hours Hours Curve Life expectancy L10IPC (40 C) see page 17 Service life L10 (Tmax) ebm-papst standard m3/h Nominal data 2016-01 Service life L10 (40 C) ebm-papst standard Temperature range Power consumption Nominal speed Sintec sleeve bearings Ball bearings Sound power level C Voltage range rpm-1 Nominal voltage Watts Air flow / Air flow Series 8400 N Sound pressure level 1) Fiberglass-reinforced plastic Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: ebm-papst: 8412 8414 8412N/2GHP