Revised February 2005 74AC08 * 74ACT08 Quad 2-Input AND Gate General Description Features The AC/ACT08 contains four, 2-input AND gates. ICC reduced by 50% on 74AC only Outputs source/sink 24 mA Ordering Code: Order Number Package Package Description Number 74AC08SC M14A 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow 74AC08SJ M14D Pb-Free 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide 74AC08MTC MTC14 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide 74AC08MTCX_NL (Note 1) MTC14 Pb-Free 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide 74AC08PC N14A 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide 74AC08PC_NL (Note 1) N14A Pb-Free 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide 74ACT08SC M14A 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow 74ACT08SCX_NL (Note 1) M14A Pb-Free 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow 74ACT08MTC MTC14 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide 74ACT08MTCX_NL (Note 1) MTC14 Pb-Free 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide 74ACT08PC N14A 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide 74ACT08PC_NL (Note 1) N14A Pb-Free 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide Device also available in Tape and Reel. Specify by appending suffix letter "X" to the ordering code. (PC not available in Tape and Reel.) Pb-Free package per JEDEC J-STD-020B. Note 1: "_NL" indicates Pb-Free package (per JEDEC J-STD-020B). Use this number to order device. Logic Symbol Connection Diagram IEEE/IEC Pin Descriptions Pin Names Description An , Bn Inputs On Outputs FACT is a trademark of Fairchild Semiconductor Corporation. (c) 2005 Fairchild Semiconductor Corporation DS009914 www.fairchildsemi.com 74AC08 * 74ACT08 Quad 2-Input AND Gate November 1988 74AC08 * 74ACT08 Absolute Maximum Ratings(Note 2) Recommended Operating Conditions 0.5V to 7.0V Supply Voltage (VCC) DC Input Diode Current (IIK) VI VI 0.5V VCC 0.5V DC Input Voltage (VI) Supply Voltage (VCC) 20 mA 20 mA 0.5V to VCC 0.5V DC Output Diode Current (IOK) VO VO 0.5V VCC 0.5V DC Output Voltage (VO) 20 mA 20 mA 0.5V to VCC 0.5V per Output Pin (ICC or IGND) 0V to VCC Output Voltage (VO) 0V to VCC 40qC to 85qC Operating Temperature (TA) AC Devices VIN from 30% to 70% of VCC r50 mA VCC @ 3.3V, 4.5V, 5.5V 125 mV/ns Minimum Input Edge Rate ('V/'t) r50 mA 65qC to 150qC ACT Devices VIN from 0.8V to 2.0V Junction Temperature (TJ) VCC @ 4.5V, 5.5V 140qC PDIP 4.5V to 5.5V Minimum Input Edge Rate ('V/'t) DC VCC or Ground Current Storage Temperature (TSTG) 2.0V to 6.0V ACT Input Voltage (VI) DC Output Source or Sink Current (IO) AC 125 mV/ns Note 2: Absolute maximum ratings are those values beyond which damage to the device may occur. The databook specifications should be met, without exception, to ensure that the system design is reliable over its power supply, temperature, and output/input loading variables. Fairchild does not recommend operation of FACT circuits outside databook specifications. DC Electrical Characteristics for AC Symbol VIH VIL VOH VOL Parameter VCC TA 25qC TA 40qC to 85qC (V) Typ Guaranteed Limits Minimum HIGH Level 3.0 1.5 2.1 2.1 Input Voltage 4.5 2.25 3.15 3.15 5.5 2.75 3.85 3.85 Maximum LOW Level 3.0 1.5 0.9 0.9 Input Voltage 4.5 2.25 1.35 1.35 1.65 5.5 2.75 1.65 Minimum HIGH Level 3.0 2.99 2.9 2.9 Output Voltage 4.5 4.49 4.4 4.4 5.5 5.49 5.4 5.4 3.0 2.56 2.46 4.5 3.86 3.76 5.5 4.86 4.76 Units Conditions VOUT V or VCC 0.1V VOUT or VCC 0.1V V IOUT 50 PA V VIN VIL or VIH IOH 12 mA IOH 24 mA IOH 24 mA (Note 3) 3.0 0.002 0.1 0.1 Output Voltage 4.5 0.001 0.1 0.1 5.5 0.001 0.1 0.1 3.0 0.36 0.44 4.5 0.36 0.44 5.5 0.36 0.44 5.5 r0.1 r1.0 PA VI V V 50 PA IOUT VIN VIL or VIH IOL 12 mA IOL 24 mA IOL 24 mA (Note 3) IIN Maximum Input (Note 5) Leakage Current IOLD Minimum Dynamic 5.5 75 mA VOLD IOHD Output Current (Note 4) 5.5 75 mA VOHD ICC Maximum Quiescent 5.5 20.0 PA VIN (Note 5) Supply Current VCC, GND 1.65V Max 3.85V Min VCC or GND Note 3: All outputs loaded; thresholds on input associated with output under test. Note 4: Maximum test duration 2.0 ms, one output loaded at a time. Note 5: IIN and ICC @ 3.0V are guaranteed to be less than or equal to the respective limit @ 5.5V VCC. www.fairchildsemi.com 0.1V V Maximum LOW Level 2.0 0.1V 2 Symbol VCC Parameter VIH VIL VOH VOL TA 25qC TA 40qC to 85qC (V) Typ Minimum HIGH Level 4.5 1.5 2.0 2.0 Input Voltage 5.5 1.5 2.0 2.0 Units Guaranteed Limits Maximum LOW Level 4.5 1.5 0.8 0.8 Input Voltage 5.5 1.5 0.8 0.8 Minimum HIGH Level 4.5 4.49 4.4 4.4 Output Voltage 5.5 5.49 5.4 5.4 4.5 3.86 3.76 5.5 4.86 4.76 Maximum LOW Level 4.5 0.001 0.1 0.1 Output Voltage 5.5 0.001 0.1 0.1 0.36 0.44 4.5 V V V Conditions VOUT 0.1V or VCC 0.1V VOUT 0.1V or VCC 0.1V IOUT 50 PA VIN VIL or VIH IOH 24 mA V IOH 24 mA (Note 6) V IOUT 50 PA VIN VIL or VIH IOL 24 mA 5.5 0.36 0.44 V IOL IIN Maximum Input Leakage Current 5.5 r0.1 r1.0 PA VI VCC, GND ICCT Maximum ICC/Input 5.5 1.5 mA VI VCC 2.1V IOLD Minimum Dynamic Output Current 5.5 75 mA VOLD IOHD (Note 7) 5.5 75 mA VOHD ICC Maximum Quiescent 0.6 5.5 Supply Current 4.0 PA 40.0 24 mA (Note 6) VIN 1.65V Max 3.85V Min VCC or GND Note 6: All outputs loaded; thresholds on input associated with output under test. Note 7: Maximum test duration 2.0 ms, one output loaded at a time. AC Electrical Characteristics for AC Symbol tPLH Parameter Propagation Delay tPHL Propagation Delay VCC TA 25qC (V) CL 50 pF (Note 8) Min Typ 3.3 1.5 5.0 1.5 3.3 5.0 TA 40qC to 85qC CL 50 pF Max Min Max 7.5 9.5 1.0 10.0 5.5 7.5 1.0 8.5 1.5 7.0 8.5 1.0 9.0 1.5 5.5 7.0 1.0 7.5 Units ns ns Note 8: Voltage Range 3.3 is 3.3V r 0.3V Voltage Range 5.0 is 5.0V r 0.5V AC Electrical Characteristics for ACT Symbol Parameter VCC TA 25qC (V) CL 50 pF TA 40qC to 85qC CL 50 pF (Note 9) Min Typ Max Min Max Units tPLH Propagation Delay 5.0 1.0 6.5 9.0 1.0 10.0 ns tPHL Propagation Delay 5.0 1.0 6.5 9.0 1.0 10.0 ns Note 9: Voltage Range 5.0 is 5.0V r 0.5V Capacitance Typ Units CIN Symbol Input Capacitance Parameter 4.5 pF VCC OPEN CPD Power Dissipation Capacitance 20.0 pF VCC 5.0V 3 Conditions www.fairchildsemi.com 74AC08 * 74ACT08 DC Electrical Characteristics for ACT 74AC08 * 74ACT08 Physical Dimensions inches (millimeters) unless otherwise noted 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow Package Number M14A www.fairchildsemi.com 4 74AC08 * 74ACT08 Physical Dimensions inches (millimeters) unless otherwise noted (Continued) Pb-Free 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide Package Number M14D 5 www.fairchildsemi.com 74AC08 * 74ACT08 Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Package Number MTC14 www.fairchildsemi.com 6 74AC08 * 74ACT08 Quad 2-Input AND Gate Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide Package Number N14A Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. www.fairchildsemi.com 7 www.fairchildsemi.com