107-68038 Packaging Specification 28Mar07 Rev F AMP 1mm STD EDGE 124 DUAL POS 1. PURPOSE Define the packaging specifiction and packaging method of AMP 1mm STD EDGE 124 DUAL POS. AMP 1mm STD EDGE 124 DUAL POS 2. APPLICABLE PRODUCT Product Description Part No. 145263-X AMP 1mm STD EDGE 124 DUAL POS 5145263-X AMP 1mm STD EDGE 124 DUAL POS, LEAD-FREE 145355-X AMP 1mm STD EDGE 124 DUAL POS 5145355-X AMP 1mm STD EDGE 124 DUAL POS 145396-1 AMP 1mm STD EDGE 124 DUAL POS 5145396-1 AMP 1mm STD EDGE 124 DUAL POS 145384-1 AMP 1mm STD EDGE 124 DUAL POS 5145384-1 AMP 1mm STD EDGE 124 DUAL POS 5/145376-X AMP 1mm STD EDGE 124 DUAL POS 5/145387-1 AMP 1mm STD EDGE 124 DUAL POS 5/145409-X AMP 1mm STD EDGE 124 DUAL POS 5/145410-X AMP 1mm STD EDGE 124 DUAL POS 3. PACKAGING MATERIAL Package INNER MIDDLE OUTER Part No. Description Size(LxWxH) Usage 112456-1 Tray assy, AGP conn 399x293x20 1/48 623272-3 Pe film 80 W 4MR/240 623894-1 Paper pad 343x292 2/240 623881-1 Air cap 343x293 2/240 623865-4 Inner label 102x51 1/48 - - - - 12120 Box,corr,rsc 349x298x146 1/240 623865-1 Outer label 102x102 1/240 DR CHK APVD Sam Wu Arthor Shi Michelle Peng Tyco Electronics AMP Guangdong Ltd. East Rongqi Road, Ronggui Town, Shunde, Foshan, Guangdong, P.R. China QR-ME-030B * Trademark | Indicates change 1 of 3 LOC FR 107-68038 3. PACKAGING MATERIAL INNER MIDDLE OUTER LABEL 623865-4 - 623865-1 SEALING - - Tape Inner Middle Outer 48 pcs/tray - 48x5=240 pcs/box 4. PACKAGING QUANTITY QTY 5. PACKING METHOD 5.1. Load connectors all oriented same way with hold downs facing down into tray. TRAY 5.2. Make sure every product put in tray upright. TRAY 5.3. Close tray cover onto the tray, ensure the tray and the covered are justification completely. TRAY 5.4. Place an inner label on top of cover. 5.5. Stack 5 loaded trayand clove facing up. TRAY 5.6. Enlace 5 trays with film. 5 TRAY 2 "+" 5.7. Set up a carton.and secure bottom flaps with tape. 5.8. Place one chipboard pad on bottom of box. 5.9. Place one piece of bubble-pack, bubble facing down on top of pad. Rev F QR-ME-030B 2 of 3 107-68038 5. PACKING METHOD 5.10. Place wraped trays into box, cont facing down. 5.11. Fill void, if any, with bubble-pack to make a firm package. 5.12. Place one piece air cap & chipboard pad on the trays in box . TRAY 5.13. Seal the box with tape. And place product identification label in "product id" marked on box. "PRODUCT ID" Rev F QR-ME-030B 3 of 3