593D
www.vishay.com Vishay Sprague
Revision: 13-Jan-12 55 Document Number: 40005
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Solid Tantalum Surface Mount Capacitors
TANTAMOUNT®, Molded Case, Low ESR
Effective September 2005, new capacitor ratings will not be
added to the 593D series. All new ratings are available in the
TR3 series. The TR3 series offers state-of-the-art low ESR
for switch mode power supplies and DC/DC converters.
FEATURES
• Terminations: 100 % matte tin, standard,
tin/lead available
• Compliant terminations
• Molded case available in five case codes
• Compatible with “High Volume” automatic pick
and place equipment
• High ripple current carrying capability
•Low ESR
• Meets IEC specification QC300801/US0001 and
EIA535BAAC mechanical and performance requirements
• Compliant to RoHS Directive 2002/95/EC
• Moisture sensitivity level 1
Note
*Pb containing terminations are not RoHS compliant, exemptions
may apply
PERFORMANCE CHARACTERISTICS
www.vishay.com/doc?40088
Operating Temperature: - 55 °C to + 125 °C
(above + 85 °C voltage derating is required)
Capacitance Range: 0.47 μF to 680 μF
Capacitance Tolerance: ± 5 %, ± 10 %, ± 20 %
100 % Surge Current Tested (C, D and E Case Sizes)
Voltage Rating: 4 VDC to 50 VDC
Notes
• We reserve the right to supply higher voltage ratings and tighter capacitance tolerance capacitors in the same case size.
Voltage substitutions will be marked with the higher voltage rating.
Effective July 15, 2008, part numbers with solderable termination codes 2T and 2W may have either matte or tin/lead terminations.
Codes 2TE3 and 2WE3 specify only matte tin terminations. Codes 8T and 8W specify only tin/lead terminations.
• Dry pack is available per request, contact regional marketing.
ORDERING INFORMATION
593D 107 X9 010 D 2WE3
TYPE CAPACITANCE CAPACITANCE
TOLERANCE
DC VOLTAGE RATING
AT + 85 °C
CASE CODE TERMINATION AND PACKAGING
This is expressed in
picofarads. The first
two digits are the
significant figures.
The third is the number
of zeros to follow
X0 = ± 20 %
X9 = ± 10 %
X5 = ± 5 %
(special order)
This is expressed in volts.
To complete the three-digit
block, zeros precede the
voltage rating. A decimal
point is indicated by an “R”
(6R3 = 6.3 V)
See Ratings and
Case Codes table
2TE3: Matte tin, 7" (178 mm) reel
2WE3: Matte tin, 13" (330 mm) reel
8T: Tin/lead, 7" (178 mm) reel
8W: Tin/lead, 13" (330 mm) reel
DIMENSIONS in inches [millimeters]
CASE CODE EIA SIZE L W H P TWTH (MIN.)
A 3216-18 0.126 ± 0.008
[3.2 ± 0.20] 0.063 ± 0.008
[1.6 ± 0.20] 0.063 ± 0.008
[1.6 ± 0.20] 0.031 ± 0.012
[0.80 ± 0.30] 0.047 ± 0.004
[1.2 ± 0.10] 0.028
[0.70]
B 3528-21 0.138 ± 0.008
[3.5 ± 0.20] 0.110 ± 0.008
[2.8 ± 0.20] 0.075 ± 0.008
[1.9 ± 0.20] 0.031 ± 0.012
[0.80 ± 0.30] 0.087 ± 0.004
[2.2 ± 0.10] 0.028
[0.70]
C 6032-28 0.236 ± 0.012
[6.0 ± 0.30] 0.126 ± 0.012
[3.2 ± 0.30] 0.098 ± 0.012
[2.5 ± 0.30] 0.051 ± 0.012
[1.3 ± 0.30] 0.087 ± 0.004
[2.2 ± 0.10] 0.039
[1.0]
D 7343-31 0.287 ± 0.012
[7.3 ± 0.30] 0.169 ± 0.012
[4.3 ± 0.30] 0.110 ± 0.012
[2.8 ± 0.30] 0.051 ± 0.012
[1.3 ± 0.30] 0.094 ± 0.004
[2.4 ± 0.10] 0.039
[1.0]
E 7343-43 0.287 ± 0.012
[7.3 ± 0.30] 0.169 ± 0.012
[4.3 ± 0.30] 0.157 ± 0.012
[4.0 ± 0.30] 0.051 ± 0.012
[1.3 ± 0.30] 0.094 ± 0.004
[2.4 ± 0.10] 0.039
[1.0]
L
TH (MIN.)
H
WTW
P
593D
www.vishay.com Vishay Sprague
Revision: 13-Jan-12 56 Document Number: 40005
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
RATINGS AND CASE CODES
μF 4 V 6.3 V 10 V 16 V 20 V 25 V 35 V 50 V
0.47 A
0.68 A
1.0 AAA/BB/C
1.5 AB/CB/C
2.2 AA/BB/CC/D
3.3 A A B C C/D
4.7 A A/B A/B B/C C D/E
6.8 A A B C C/D D/E
10 A A A/B/C B/C C C/D D/E
15 A A A/B B/C B/C C/D D/E
22 A A/B A/B/C B/C C/D D D/E
33 A/B A/B B/C B/C/D C/D D/E
47 A/B B/C B/C/D C/D D/E E
68 B/C B/C C/D D D/E
100 B/C B/C/D C/D D/E E
150 B/C/D C/D/E D/E E
220 C/D D/E D/E
330 D D/E E
470 D/E E
680 E
MARKING
“A” CASE VOLTAGE CODE
VOLTS CODE
4.0 G
6.3 J
10 A
16 C
20 D
25 E
35 V
50 T
Marking
Capacitor marking includes an anode (+) polarity band, capacitance in microfarads and the voltage rating. “A” Case capacitors use a letter
code for the voltage and EIA capacitance code.
The Vishay Sprague® trademark is included if space permits. Capacitors rated at 6.3 V are marked 6 V.
A manufacturing date code is marked on all capacitors.
Capacitors might bear a slightly different marking than the one shown above. For example, rating 22 μF 10 V could be marked either as
22-10L or 22R10.
Call the factory for further explanation.
Capacitance Code, pF Indicates Lead (Pb)-free
Polarity Band Voltage Code
V104L
A Case
Data Code Vishay
Sprague Logo
Indicates
Lead (Pb)-free
Voltage
Capacitance
μF
Polarity Band 22 10L
XX 2
B, C, D, E Cases
593D
www.vishay.com Vishay Sprague
Revision: 13-Jan-12 57 Document Number: 40005
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
STANDARD RATINGS
CAPACITANCE
(μF) CASE CODE PART NUMBER
MAX. DC
LEAKAGE
AT + 25 °C
(μA)
MAX. DF
AT + 25 °C
120 Hz
(%)
MAX. ESR
AT + 25 °C
100 kHz
()
MAX. RIPPLE
100 kHz
IRMS
(A)
4 VDC AT + 85 °C; 2.7 VDC AT + 125 °C
15 A 593D156(1)004A(2) 0.6 6 1.500 0.22
22 A 593D226(1)004A(2) 0.9 6 1.500 0.22
33 A 593D336(1)004A(2) 1.3 6 1.500 0.22
33 B 593D336(1)004B(2) 1.3 6 0.500 0.41
47 A 593D476(1)004A(2) 1.9 14 0.800 0.31
47 B 593D476(1)004B(2) 1.9 6 0.500 0.41
68 B 593D686(1)004B(2) 2.7 6 0.500 0.41
68 C 593D686(1)004C(2) 2.7 6 0.275 0.63
100 B 593D107(1)004B(2) 4.0 8 0.450 0.43
100 C 593D107(1)004C(2) 4.0 6 0.225 0.66
150 B 593D157(1)004B(2) 6.0 14 0.500 0.41
150 C 593D157(1)004C(2) 6.0 12 0.250 0.66
150 D 593D157(1)004D(2) 6.0 8 0.150 1.00
220 C 593D227(1)004C(2) 8.8 8 0.200 0.74
220 D 593D227(1)004D(2) 8.8 8 0.150 1.00
330 D 593D337(1)004D(2) 13.2 8 0.150 1.00
470 D 593D477(1)004D(2) 18.8 10 0.125 1.10
470 E 593D477(1)004E(2) 18.8 10 0.100 1.28
680 E 593D687(1)004E(2) 27.2 12 0.100 1.28
6.3 VDC AT + 85 °C; 4 VDC AT 125 °C
10 A 593D106(1)6R3A(2) 0.6 6 2.000 0.19
15 A 593D156(1)6R3A(2) 0.9 6 2.000 0.19
22 A 593D226(1)6R3A(2) 1.3 6 2.000 0.19
22 B 593D226(1)6R3B(2) 1.3 6 0.600 0.38
33 A 593D336(1)6R3A(2) 2.0 14 0.800 0.31
33 B 593D336(1)6R3B(2) 2.0 6 0.600 0.38
47 B 593D476(1)6R3B(2) 2.8 6 0.550 0.39
47 C 593D476(1)6R3C(2) 2.8 6 0.300 0.61
68 B 593D686(1)6R3B(2) 4.1 6 0.550 0.39
68 C 593D686(1)6R3C(2) 4.1 6 0.275 0.63
100 B 593D107(1)6R3B(2) 6.0 15 0.500 0.41
100 C 593D107(1)6R3C(2) 6.0 6 0.250 0.66
100 D 593D107(1)6R3D(2) 6.0 6 0.140 1.04
150 C 593D157(1)6R3C(2) 9.0 8 0.200 0.74
150 D 593D157(1)6R3D(2) 9.0 8 0.125 1.10
150 E 593D157(1)6R3E(2) 9.0 8 0.100 1.28
220 D 593D227(1)6R3D(2) 13.2 8 0.100 1.22
220 E 593D227(1)6R3E(2) 13.2 8 0.100 1.28
330 D 593D337(1)6R3D(2) 19.8 8 0.125 1.10
330 E 593D337(1)6R3E(2) 19.8 8 0.100 1.28
470 E 593D477(1)6R3E(2) 28.2 10 0.100 1.28
10 VDC AT + 85 °C; 7 VDC AT 125 °C
4.7 A 593D475(1)010A(2) 0.5 6 3.000 0.16
6.8 A 593D685(1)010A(2) 0.7 6 3.000 0.16
10 A 593D106(1)010A(2) 1.0 6 2.000 0.19
15 A 593D156(1)010A(2) 1.5 6 2.000 0.19
15 B 593D156(1)010B(2) 1.5 6 0.700 0.35
22 A 593D226(1)010A(2) 2.2 8 1.500 0.22
22 B 593D226(1)010B(2) 2.2 6 0.700 0.35
22 C 593D226(1)010C(2) 2.2 6 0.345 0.56
Note
• Part number definitions:
(1) Tolerance: X0, X9, X5
(2) Terminations and packaging: 2TE3, 2WE3, 8T, 8W
593D
www.vishay.com Vishay Sprague
Revision: 13-Jan-12 58 Document Number: 40005
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
10 VDC AT + 85 °C; 7 VDC AT 125 °C
33 B 593D336(1)010B(2) 3.3 6 0.600 0.38
33 C 593D336(1)010C(2) 3.3 6 0.300 0.61
47 B 593D476(1)010B(2) 4.7 6 0.600 0.38
47 C 593D476(1)010C(2) 4.7 6 0.300 0.61
47 D 593D476(1)010D(2) 4.7 6 0.200 0.87
68 C 593D686(1)010C(2) 6.8 6 0.275 0.63
68 D 593D686(1)010D(2) 6.8 6 0.150 1.00
100 C 593D107(1)010C(2) 10.0 8 0.200 0.74
100 D 593D107(1)010D(2) 10.0 6 0.100 1.22
150 D 593D157(1)010D(2) 15.0 8 0.100 1.22
150 E 593D157(1)010E(2) 15.0 8 0.100 1.28
220 D 593D227(1)010D(2) 22.0 8 0.125 1.10
220 E 593D227(1)010E(2) 22.0 8 0.100 1.28
330 E 593D337(1)010E(2) 33.0 10 0.100 1.28
16 VDC AT + 85 °C; 10 VDC AT + 125 °C
3.3 A 593D335(1)016A(2) 0.5 6 3.500 0.15
4.7 A 593D475(1)016A(2) 0.8 6 2.500 0.17
4.7 B 593D475(1)016B(2) 0.8 6 1.500 0.24
6.8 A 593D685(1)016A(2) 1.1 6 3.000 0.16
10 A 593D106(1)016A(2) 1.6 6 1.700 0.21
10 B 593D106(1)016B(2) 1.6 6 0.800 0.33
10 C 593D106(1)016C(2) 1.6 6 0.450 0.49
15 B 593D156(1)016B(2) 2.4 6 0.800 0.33
15 C 593D156(1)016C(2) 2.4 6 0.400 0.52
22 B 593D226(1)016B(2) 3.5 6 0.700 0.35
22 C 593D226(1)016C(2) 3.5 6 0.350 0.56
33 B 593D336(1)016B(2) 5.3 6 0.700 0.35
33 C 593D336(1)016C(2) 5.3 6 0.300 0.61
33 D 593D336(1)016D(2) 4.2 4 0.225 0.82
47 C 593D476(1)016C(2) 7.5 6 0.300 0.61
47 D 593D476(1)016D(2) 7.5 6 0.150 1.00
68 D 593D686(1)016D(2) 10.9 6 0.150 1.00
100 D 593D107(1)016D(2) 16.0 8 0.125 1.10
100 E 593D107(1)016E(2) 16.0 8 0.100 1.28
150 E 593D157(1)016E(2) 24.0 8 0.100 1.28
20 VDC AT + 85 °C; 13 VDC AT + 125 °C
1.0 A 593D105(1)020A(2) 0.5 4 5.500 0.12
2.2 A 593D225(1)020A(2) 0.5 6 4.000 0.14
3.3 A 593D335(1)020A(2) 0.7 6 4.000 0.14
4.7 A 593D475(1)020A(2) 0.9 6 3.500 0.15
4.7 B 593D475(1)020B(2) 0.9 6 1.000 0.29
6.8 B 593D685(1)020B(2) 1.4 6 1.000 0.29
10 B 593D106(1)020B(2) 2.0 6 1.000 0.29
10 C 593D106(1)020C(2) 2.0 6 0.450 0.49
15 B 593D156(1)020B(2) 3.0 6 1.000 0.29
15 C 593D156(1)020C(2) 3.0 6 0.400 0.52
22 C 593D226(1)020C(2) 4.4 6 0.375 0.54
22 D 593D226(1)020D(2) 3.5 4 0.225 0.82
33 C 593D336(1)020C(2) 6.6 6 0.350 0.56
33 D 593D336(1)020D(2) 6.6 6 0.200 0.87
47 D 593D476(1)020D(2) 9.4 6 0.200 0.87
47 E 593D476(1)020E(2) 7.5 4 0.150 1.05
68 D 593D686(1)020D(2) 13.6 6 0.175 0.93
68 E 593D686(1)020E(2) 13.6 6 0.150 1.05
100 E 593D107(1)020E(2) 20.0 8 0.150 1.05
STANDARD RATINGS
CAPACITANCE
(μF) CASE CODE PART NUMBER
MAX. DC
LEAKAGE
AT + 25 °C
(μA)
MAX. DF
AT + 25 °C
120 Hz
(%)
MAX. ESR
AT + 25 °C
100 kHz
()
MAX. RIPPLE
100 kHz
IRMS
(A)
Note
• Part number definitions:
(1) Tolerance: X0, X9, X5
(2) Terminations and packaging: 2TE3, 2WE3, 8T, 8W
593D
www.vishay.com Vishay Sprague
Revision: 13-Jan-12 59 Document Number: 40005
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
25 VDC AT + 85 °C; 17 VDC AT + 125 °C
1.0 A 593D105(1)025A(2) 0.5 4 4.000 0.14
1.5 A 593D155(1)025A(2) 0.5 6 4.000 0.14
2.2 A 593D225(1)025A(2) 0.6 6 4.000 0.14
2.2 B 593D225(1)025B(2) 0.6 6 1.500 0.24
3.3 B 593D335(1)025B(2) 0.8 6 1.500 0.24
4.7 B 593D475(1)025B(2) 1.2 6 1.500 0.24
4.7 C 593D475(1)025C(2) 1.2 6 0.525 0.46
6.8 C 593D685(1)025C(2) 1.7 6 0.500 0.47
10 C 593D106(1)025C(2) 2.5 6 0.450 0.49
15 C 593D156(1)025C(2) 3.8 6 0.425 0.51
15 D 593D156(1)025D(2) 3.8 6 0.250 0.77
22 D 593D226(1)025D(2) 5.5 6 0.200 0.87
33 D 593D336(1)025D(2) 8.3 6 0.200 0.87
33 E 593D336(1)025E(2) 8.3 6 0.200 0.91
47 E 593D476(1)025E(2) 11.8 6 0.200 0.91
35 VDC AT + 85 °C; 23 VDC AT + 125 °C
0.47 A 593D474(1)035A(2) 0.5 4 4.000 0.14
0.68 A 593D684(1)035A(2) 0.5 4 4.000 0.14
1.0 A 593D105(1)035A(2) 0.5 4 4.000 0.14
1.0 B 593D105(1)035B(2) 0.5 4 2.000 0.21
1.5 B 593D155(1)035B(2) 0.5 6 2.000 0.21
1.5 C 593D155(1)035C(2) 0.5 6 0.900 0.35
2.2 B 593D225(1)035B(2) 0.8 6 2.000 0.21
2.2 C 593D225(1)035C(2) 0.8 6 0.900 0.40
3.3 C 593D335(1)035C(2) 1.2 6 0.700 0.45
4.7 C 593D475(1)035C(2) 1.6 6 0.500 0.47
6.8 C 593D685(1)035C(2) 2.4 6 0.475 0.48
6.8 D 593D685(1)035D(2) 2.4 6 0.300 0.71
10 C 593D106(1)035C(2) 3.5 6 0.450 0.49
10 D 593D106(1)035D(2) 3.5 6 0.300 0.71
15 D 593D156(1)035D(2) 5.3 6 0.300 0.71
15 E 593D156(1)035E(2) 5.3 6 0.300 0.74
22 D 593D226(1)035D(2) 7.7 6 0.300 0.71
22 E 593D226(1)035E(2) 7.7 6 0.275 0.77
50 VDC AT + 85 °C; 33 VDC AT + 125 °C
1.0 B 593D105(1)050B(2) 0.5 4 2.000 0.21
1.0 C 593D105(1)050C(2) 0.5 4 1.600 0.26
1.5 B 593D155(1)050B(2) 0.8 6 2.000 0.21
1.5 C 593D155(1)050C(2) 0.8 6 1.500 0.27
2.2 C 593D225(1)050C(2) 1.1 6 1.500 0.27
2.2 D 593D225(1)050D(2) 1.1 6 0.800 0.43
3.3 C 593D335(1)050C(2) 1.7 6 1.500 0.27
3.3 D 593D335(1)050D(2) 1.7 6 0.800 0.43
4.7 D 593D475(1)050D(2) 2.4 6 0.600 0.50
4.7 E 593D475(1)050E(2) 1.9 6 0.600 0.50
6.8 D 593D685(1)050D(2) 3.4 6 0.600 0.50
6.8 E 593D685(1)050E(2) 3.4 6 0.550 0.55
10 D 593D106(1)050D(2) 5.0 6 0.550 0.52
10 E 593D106(1)050E(2) 5.0 6 0.550 0.55
STANDARD RATINGS
CAPACITANCE
(μF) CASE CODE PART NUMBER
MAX. DC
LEAKAGE
AT + 25 °C
(μA)
MAX. DF
AT + 25 °C
120 Hz
(%)
MAX. ESR
AT + 25 °C
100 kHz
()
MAX. RIPPLE
100 kHz
IRMS
(A)
Note
• Part number definitions:
(1) Tolerance: X0, X9, X5
(2) Terminations and packaging: 2TE3, 2WE3, 8T, 8W
593D
www.vishay.com Vishay Sprague
Revision: 13-Jan-12 60 Document Number: 40005
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
RECOMMENDED VOLTAGE DERATING GUIDELINES (for temperatures below + 85 °C)
STANDARD CONDITIONS. FOR EXAMPLE: OUTPUT FILTERS
Capacitor Voltage Rating Operating Voltage
4.0 2.5
6.3 3.6
10 6.0
16 10
20 12
25 15
35 24
50 28
SEVERE CONDITIONS. FOR EXAMPLE: INPUT FILTERS
Capacitor Voltage Rating Operating Voltage
4.0 2.5
6.3 3.3
10 5.0
16 8.0
20 10
25 12
35 15
50 24
POWER DISSIPATION
CASE CODE MAXIMUM PERMISSIBLE POWER DISSIPATION AT + 25 °C (W) IN FREE AIR
A 0.075
B 0.085
C 0.110
D 0.150
E 0.165
STANDARD PACKAGING QUANTITY
CASE CODE UNITS PER REEL
7" REEL 13" REEL
A 2000 9000
B 2000 8000
C 500 3000
D 500 2500
E 400 1500
PRODUCT INFORMATION
Guide for Molded Tantalum Capacitors
www.vishay.com/doc?40074
Pad Dimensions
Packaging Dimensions
Moisture Sensitivity www.vishay.com/doc?40135
SELECTOR GUIDES
Solid Tantalum Selector Guide www.vishay.com/doc?49053
Solid Tantalum Chip Capacitors www.vishay.com/doc?40091
FAQ
Frequently Asked Questions www.vishay.com/doc?40110
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 12-Mar-12 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
