LM2901Q/LM2901AQ/LM2903Q/LM2903AQ
Document number: DS37814 Rev. 2 - 2
1 of 19
www.diodes.com
June 2016
© Diodes Incorporated
LM2901Q/ LM2901AQ/
LM2903Q/ LM2903AQ
ADVANCED I NF ORMATION
AUTOMOTIVE COMPLIANT DUAL AND QUAD DIFFERENTIAL COMPARATORS
Description
The LM2901Q/2903Q series comparators consist of four and two
independent precision voltage comparators with very low input offset
voltage specification. They are designed to operate from a single
power supply over a wide range of voltages; however operation from
split power supplies is also possible. They offer low power supply
current independent of the magnitude of the power supply voltage.
The LM2901Q/2903Q series comparators are designed to directly
interface with TTL and CMOS.
The LM2903Q dual devices are available in SO-8, MSOP-8 and
TSSOP-8; and the LM2901Q quad devices are available in SO-14
and TSSOP-14 - all are in industry-standard pinouts.
All use “green” mold compound and are qualified to AEC-Q100
Grade 1 and are Automotive Compliant supporting PPAPs.
Features
Wide Power Supply Range:
Single Supply: 2V to 36V
Dual Supplies: ±1.0V to ±18V
Very Low Supply Current Drain – Independent of Supply Voltage
LM2903Q: 0.6mA
LM2901Q: 0.9mA
Low Input Bias Current: 25nA
Low Input Offset Current: ±5nA
Typical Offset Voltage:
Non-A Device: 2mV
A Device: 1mV
Common-Mode Input Voltage Range Includes Ground
Differential Input Voltage Range Equal to the Power Supply
Voltage
Low Output Saturation Voltage:
LM2903Q: 200mV at 4mA
LM2901Q: 100mV at 4mA
Output Voltage Compatible with TTL, MOS and CMOS
Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
Qualified to AEC-Q100 Grade 1
PPAP Capable (Note 4)
Pin Assignments
LM2903Q/ LM2903AQ
LM2901Q/ LM2901AQ
(Top View)
1
2
313
12
11
4
14
SO-14/TSSOP-14
1OUT 3OUT
GND
7
6
59
10
8
4IN+
3IN-
3IN+
4IN-
2OUT
VCC
2IN-
2IN+
1IN-
1IN+
4OUT
2
+
-
1
+
-
+
-
4
+
-
3
Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"
and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
4. Automotive products are AEC-Q100 qualified and are PPAP capable. Refer http://www.diodes.com/quality/product_compliance_definitions/.
LM2901Q/LM2901AQ/LM2903Q/LM2903AQ
Document number: DS37814 Rev. 2 - 2
2 of 19
www.diodes.com
June 2016
© Diodes Incorporated
LM2901Q/ LM2901AQ/
LM2903Q/ LM2903AQ
ADVANCED I NF ORMATION
Schematic Diagram
+INPUT
-INPUT
Q5 Q6
Q1 Q2 Q3 Q4
Q7
Q8 OUTPUT
VCC
Functional Block Diagram of LM2901Q/2901AQ/2903Q/2903AQ
(Each Comparator)
Pin Descriptions
LM2901Q, LM2901AQ
Pin Name
Pin #
Function
1OUT
1
Channel 1 Output
2OUT
2
Channel 2 Output
VCC
3
Chip Supply Voltage
2IN-
4
Channel 2 Inverting Input
2IN+
5
Channel 2 Non-Inverting Input
1IN-
6
Channel 1 Inverting Input
1IN+
7
Channel 1 Non-Inverting Input
3IN-
8
Channel 3 Inverting Input
3IN+
9
Channel 3 Non-Inverting Input
4IN-
10
Channel 4 Inverting Input
4IN+
11
Channel 4 Non-Inverting Input
GND
12
Ground
4OUT
13
Channel 4 Output
3OUT
14
Channel 3 Output
LM2903Q, LM2903AQ
1OUT
1
Channel 1 Output
1IN-
2
Channel 1 Inverting Input
1IN+
3
Channel 1 Non-inverting Input
GND
4
Ground
2IN+
5
Channel 2 Non-Inverting Input
2IN-
6
Channel 2 Inverting Input
2OUT
7
Channel 2 Output
VCC
8
Chip Supply Voltage
LM2901Q/LM2901AQ/LM2903Q/LM2903AQ
Document number: DS37814 Rev. 2 - 2
3 of 19
www.diodes.com
June 2016
© Diodes Incorporated
LM2901Q/ LM2901AQ/
LM2903Q/ LM2903AQ
ADVANCED I NF ORMATION
Absolute Maximum Ratings (Note 5) (@TA = +25°C, unless otherwise specified.)
Symbol
Parameter
Rating
Unit
VCC
Supply Voltage
36
V
VID
Differential Input Voltage
36
V
VIN
Input Voltage
-0.3 to +36
V
IIN
Input Current (VIN < -0.3V)
50
mA
VO
Output Voltage
36
V
IO
Output Current
20
mA
—
Duration of Output Short Circuit to Ground (Note 6)
Unlimited
—
θJA
Package Thermal Impedance
(Note 7)
LM2903_QS-13
150
°C/W
LM2903_QTH-13
175
LM2903_QM8-13
200
LM2901_QS14
89
LM2901_QT14
100
TA
Operating Temperature Range
-40 to +125
°C
TJ
Operating Junction Temperature
+150
°C
TST
Storage Temperature Range
-65 to +150
°C
TLEAD
Lead Temperature (Soldering, 10 seconds)
+260
°C
Notes: 5. Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings only; functional
operation of the device at these or any other conditions beyond those indicated under recommended operating conditions is not implied. Exposure to
absolute-maximum-rated conditions for extended periods may affect device reliability.
6. Short circuits from outputs to VCC can cause excessive heating and eventual destruction.
7. Maximum power dissipation is a function of TJ(MAX), θJA, and TA. The maximum allowable power dissipation at any allowable ambient temperature is
PD = (TJ(MAX) − TA)/θJA. Operating at the absolute maximum TJ of +150°C can affect reliability.
ESD Ratings
Human Body Mode ESD Protection (Note 8)
LM2901_QS14
500
V
LM2901_QT14
500
LM2903_QS-13
500
LM2903_QTH-13
500
LM2903_QM8-13
<500
Charge Device Mode ESD Protection
LM2901_QS14
1,000
LM2901_QT14
LM2903_QS-13
LM2903_QTH-13
LM2903_QM8-13
Note: 8. Human body model, 1.5kΩ in series with 100pF.
Recommended Operating Conditions (Over Operating Free-Air Temperature Range, unless otherwise noted.)
Parameter
Min
Max
Units
Supply Voltage
Single Supply
2
36
V
Dual Supply
±1
±18
Ambient Temperature Range
-40
+125
°C
Junction Temperature Range
-40
+125
LM2901Q/LM2901AQ/LM2903Q/LM2903AQ
Document number: DS37814 Rev. 2 - 2
4 of 19
www.diodes.com
June 2016
© Diodes Incorporated
LM2901Q/ LM2901AQ/
LM2903Q/ LM2903AQ
ADVANCED I NF ORMATION
Electrical Characteristics (Notes 9 & 10) (@VCC = 5.0V, GND = 0V, TA = +25°C, unless otherwise specified.)
LM2901Q, LM2901AQ
Parameter
Conditions
TA
Min
Typ
Max
Unit
VIO
Input Offset Voltage
VIC = VCMR Min,
VO = 1.4V,
VCC = 5V to 30V
(Note 11)
Non-A Device
TA = +25°C
—
2
7
mV
Full Range
—
—
15
A-Suffix Device
TA = +25°C
—
1
2
Full Range
—
—
4
IB
Input Bias Current
IIN+ or IIN− with OUT in Linear Range,
VCM = 0V (Note 12)
TA = +25°C
—
25
250
nA
Full Range
—
—
500
IIO
Input Offset Current
IIN+ - IIN−, VCM = 0V
TA = +25°C
—
5
50
nA
Full Range
—
—
200
VCMR
Input Common-Mode
Voltage Range
VCC = 30V (Note 13)
TA = +25°C
0 to
VCC -1.5
—
—
V
Full Range
0 to
VCC -2
—
—
ICC
Supply Current
(Four Comparators)
RL = ∞ on Quad
Channels
VCC = 30V
TA = +25°C
—
1.2
2.5
mA
Full range
—
—
3.5
VCC = 5V
TA = +25°C
—
0.9
2
Full Range
—
—
3.0
AV
Voltage Gain
VCC = 15V, VOUT = 1V to 11V,
RL ≥ 15kΩ,
TA = +25°C
50
200
—
V/mV
—
Large Signal Response Time
VIN = TTL Logic Swing, VREF = 1.4V,
VRL = 5V, RL = 5.1kΩ
TA = +25°C
—
300
—
ns
—
Response Time
VRL = 5V, RL = 5.1kΩ (Note 14)
TA = +25°C
—
1.3
—
µs
IO(SINK)
Output Sink Current
VIN− = 1V, VIN+ = 0, VO ≤ 1.5V
TA = +25°C
6
16
—
mA
VSAT
Saturation Voltage
VIN− = 1V, VIN+ = 0, ISINK ≤ 4mA
TA = +25°C
—
100
400
mV
Full Range
—
—
700
IO(LEAK)
Output Leakage Current
VIN− = 0V, VIN+ = 1, VO = 5V
TA = +25°C
—
0.1
—
nA
VIN− = 0V, VIN+ = 1, VO = 30V
Full Range
—
—
1
µA
VID
Differential Input Voltage
All VIN ≥0V (or V- if used) (Note 15)
Full Range
—
—
36
V
Notes: 9. Typical values represent the most likely parametric norm as determined at the time of characterization. Actual typical values may vary over time and will
also depend on the application and configuration. The typical values are not tested and are not guaranteed on shipped production material.
10. All limits are guaranteed by testing or statistical analysis. Limits over the full temperature (-40 ≤ TA ≤ +125°C) are guaranteed by design, but not tested in
production.
11. VO
1.4V, RS = 0Ω with VCC from 5V to 30V.
12. The direction of the input current is out of the IC due to the PNP input stage. This current is essentially constant, independent of the state of the output
so no loading change exists on the input lines.
13. The input common-mode voltage of either input signal voltage should not be allowed to go negative by more than 0.3V (@ +25°C). The upper end of the
common-mode voltage range is VCC -1.5V (@ +25°C), but either or both inputs can go to +36V without damage, independent of the magnitude of VCC.
14. The response time specified is for a 100mV step input with 5mV overdrive. For larger overdrive signals 300ns can be obtained, see typical performance
characteristics.
15. Positive excursions of input voltage may exceed the power supply level. As long as other voltages remain within the common mode range, the
comparator will provide a proper output stage. The low voltage state must not be less than -0.3V (or 0.3V below the magnitude of the negative power
supply, if used).
LM2901Q/LM2901AQ/LM2903Q/LM2903AQ
Document number: DS37814 Rev. 2 - 2
5 of 19
www.diodes.com
June 2016
© Diodes Incorporated
LM2901Q/ LM2901AQ/
LM2903Q/ LM2903AQ
ADVANCED I NF ORMATION
Electrical Characteristics (continued) (Notes 9 & 10) (@VCC = 5.0V, GND = 0V, TA = +25°C, unless otherwise specified.)
LM2903Q, LM2903AQ
Parameter
Conditions
TA
Min
Typ
Max
Unit
VIO
Input Offset Voltage
VIC = VCMR Min,
VO = 1.4V,
VCC = 5V to =30V
(Note 11)
Non-A Device
TA = +25°C
—
2
7
mV
Full Range
—
—
15
A-Suffix Device
TA = +25°C
—
1
2
Full Range
—
—
4
IB
Input Bias Current
IIN+ or IIN− with OUT in Linear Range,
VCM = 0V (Note 12)
TA = +25°C
—
25
250
nA
Full Range
—
—
500
IIO
Input Offset Current
IIN+ - IIN−, VCM = 0V
TA = +25°C
—
5
50
nA
Full Range
—
—
200
VCMR
Input Common-Mode Voltage
Range
VCC= 30V (Note 13)
TA = +25°C
0 to
VCC -1.5
—
—
V
Full Range
0 to
VCC-2
—
—
ICC
Supply Current
RL = ∞ on Both
Channels
VCC= 30V
TA = +25°C
—
0.7
1.7
mA
Full Range
—
—
3.0
VCC = 5V
TA = +25°C
—
0.6
1
Full Range
—
—
2.0
AV
Voltage Gain
VCC = 15V, VOUT = 1V to 11V,
RL ≥ 15kΩ,
TA = +25°C
50
200
—
V/mV
—
Large Signal Response Time
VIN = TTL Logic Swing, VREF = 1.4V,
VRL = 5V, RL = 5.1kΩ
TA = +25°C
—
300
—
ns
—
Response Time
VRL = 5V, RL = 5.1kΩ (Note 14)
TA = +25°C
—
1.3
—
µs
IO(SINK)
Output Sink Current
VIN− = 1V, VIN+ = 0, VO ≤ 1.5V
TA = +25°C
6
16
—
mA
VSAT
Saturation Voltage
VIN− = 1V, VIN+ = 0, ISINK ≤ 4mA
TA = +25°C
—
200
400
mV
Full Range
—
—
700
IO(LEAK)
Output Leakage Current
VIN− = 0V, VIN+ = 1, VO = 5V
TA = +25°C
—
0.1
—
nA
VIN− = 0V, VIN+ = 1, VO = 30V
Full Range
—
—
1
µA
VID
Differential Input Voltage
All VIN ≥0V (or V- if used) (Note 15)
Full Range
—
—
36
V
Notes: 9. Typical values represent the most likely parametric norm as determined at the time of characterization. Actual typical values may vary over time and will
also depend on the application and configuration. The typical values are not tested and are not guaranteed on shipped production material
10. All limits are guaranteed by testing or statistical analysis. Limits over the full temperature (-40 ≤ TA ≤ +125°C) are guaranteed by design, but not tested
in production.
11. VO
1.4V, RS = 0Ω with VCC from 5V to 30V.
12. The direction of the input current is out of the IC due to the PNP input stage. This current is essentially constant, independent of the state of the output
so no loading change exists on the input lines.
13. The input common-mode voltage of either input signal voltage should not be allowed to go negative by more than 0.3V (@ +25°C). The upper end of the
common-mode voltage range is VCC -1.5V (@ +25°C), but either or both inputs can go to +36V without damage, independent of the magnitude of VCC.
14. The response time specified is for a 100mV step input with 5mV overdrive. For larger overdrive signals 300ns can be obtained, see typical performance
characteristics.
15. Positive excursions of input voltage may exceed the power supply level. As long as other voltages remain within the common-mode range, the
comparator will provide a proper output stage. The low voltage state must not be less than -0.3V (or 0.3V below the magnitude of the negative power
supply, if used).
LM2901Q/LM2901AQ/LM2903Q/LM2903AQ
Document number: DS37814 Rev. 2 - 2
6 of 19
www.diodes.com
June 2016
© Diodes Incorporated
LM2901Q/ LM2901AQ/
LM2903Q/ LM2903AQ
ADVANCED I NF ORMATION
Performance Characteristics
0 4 8 12 16 20 24 28 32 36 40
0.0
0.2
0.4
0.6
0.8
1.0
TA=+85OC
TA=+125OC
Output Low State
Supply Current (mA)
TA=-40OC
TA=+25OC
LM2903Q/LM2903AQ
Supply Voltage (V)
Supply Current vs. Supply Voltage
0 4 8 12 16 20 24 28 32 36 40
0.0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
2.0
TA=+85OC
TA=+125OC
Output Low State
Supply Current (mA)
TA=-40OC
TA=+25OC
LM2901Q/LM2901AQ
Supply Voltage (V)
Supply Current vs. Supply Voltage
-40 -25 -10 5 20 35 50 65 80 95 110 125
0.0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0 Output Low State
VCC=5.0V
VCC=30V
Supply Current (mA)
LM2903Q/LM2903AQ
Supply Voltage (V)
Supply Current vs. Temperature
-40 -25 -10 5 20 35 50 65 80 95 110 125
0.0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
2.0
VCC=5.0V
VCC=30V
Output Low State
Supply Current (mA)
LM2901Q/LM2901AQ
Temperature (OC)
Supply Current vs. Temperature
0 4 8 12 16 20 24 28 32 36
0
10
20
30
40
50
60
70
80
90
100
TA=+85OC
TA=+125OC
VCM=0V
Input Bias Current (nA)
TA=-40OC
TA=+25OC
LM2903Q/LM2903AQ
Supply Voltage (V)
Input Bias Current vs. Supply Voltage
-40 -25 -10 5 20 35 50 65 80 95 110 125
0
10
20
30
40
50
60
70
80
90
100
LM2903Q/LM2903AQ
VCC=5.0V
VCM=0V
Input Bias Current (nA)
Temperature (OC)
Input Bias Current vs. Temperature
LM2901Q/LM2901AQ/LM2903Q/LM2903AQ
Document number: DS37814 Rev. 2 - 2
7 of 19
www.diodes.com
June 2016
© Diodes Incorporated
LM2901Q/ LM2901AQ/
LM2903Q/ LM2903AQ
ADVANCED I NF ORMATION
Performance Characteristics (continued)
0 4 8 12 16 20 24 28 32 36
0
10
20
30
40
50
60
70
80
90
100 VCM=0V
Input Bias Current (nA)
TA=-40OC
TA=+25OC
TA=+85OC
TA=+125OC
LM2901Q/LM2901AQ
Supply Voltage (V)
Input Bias Current vs. Supply Voltage
-40 -25 -10 5 20 35 50 65 80 95 110 125
0
10
20
30
40
50
60
70
80
90
100 VCC=5.0V
VCM=0V
Input Bias Current (nA)
LM29001Q/LM2901AQ
Temperature (OC)
Input Bias Current vs. Temperature
0.1 1 10 100
1E-3
0.01
0.1
1
10 VCC=15V
Output Saturation Voltage (V)
TA=-40OC
TA=+25OC
TA=+85OC
TA=+125OC
LM2901Q/LM2901QA
Output Sink Current (mA)
Output Saturation Voltage vs. Sink Current
Response Time for Various Input Overdrive
0.1 1 10 100
1E-3
0.01
0.1
1
10 VCC=15V
Output Saturation Voltage (V)
TA=-40OC
TA=+25OC
TA=+85OC
TA=+125OC
LM2903Q/LM2903QA
Output Sink Current (mA)
Output Saturation Voltage vs. Sink Current
Response Time for Various Input Overdrive
LM2901Q/LM2901AQ/LM2903Q/LM2903AQ
Document number: DS37814 Rev. 2 - 2
8 of 19
www.diodes.com
June 2016
© Diodes Incorporated
LM2901Q/ LM2901AQ/
LM2903Q/ LM2903AQ
ADVANCED I NF ORMATION
Performance Characteristics (continued)
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5
-1.0
-0.5
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
TA=-40OC
TA=25OC
TA=125OC
Input Offset Voltage (mV)
Input Common Mode Voltage(V)
VCC=5.0V
Input Offset Voltage vs. Input Common-Mode Voltage
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28
-2.0
-1.6
-1.2
-0.8
-0.4
0.0
0.4
0.8
1.2
1.6
2.0
TA=-40OC
TA=25OC
TA=125OC
Input Offset Voltage (mV)
Input Common Mode Voltage(V)
VCC=30V
Input Offset Voltage vs. Input Common-Mode Voltage
LM2901Q/LM2901AQ/LM2903Q/LM2903AQ
Document number: DS37814 Rev. 2 - 2
9 of 19
www.diodes.com
June 2016
© Diodes Incorporated
LM2901Q/ LM2901AQ/
LM2903Q/ LM2903AQ
ADVANCED I NF ORMATION
Application Information
General Information
The LM2901Q/2903Q series comparators are high-gain, wide-bandwidth devices, and like most comparators, can easily oscillate if the output lead
is inadvertently allowed to capacitive couple to the inputs via stray capacitance. This shows up only during the output voltage transition intervals as
the comparator changes states. Standard PC board layout is helpful as it reduces stray input-output coupling. Reducing the input resistors to
<10kΩ reduces the feedback signal levels and finally, adding even a small amount (1.0 to 10mV) of positive feedback (hysteresis) causes such a
rapid transition that oscillations due to stray feedback are not possible. Simply socketing the IC and attaching resistors to the pins will cause input-
output oscillations during the small transition intervals unless hysteresis is used. If the input signal is a pulse waveform, with relatively fast rise and
fall times, hysteresis is not required. All input pins of any unused comparators should be tied to the negative supply.
The bias network of the LM2901Q/2903Q series comparators establishes a quiescent current independent of the magnitude of the power supply
voltage over the range of from 2.0 VDC to 30 VDC.
The differential input voltage may be larger than VCC without damaging the device. Protection should be provided to prevent the input voltages from
becoming negative more than -0.3 VDC (@ +25°C). An input clamp diode can be used as shown in the applications section.
The output of the LM2901Q/2903Q series comparators is the uncommitted collector of a grounded-emitter NPN output transistor. Many collectors
can be tied together to provide an output OR’ing function. An output pull-up resistor can be connected to any available power supply voltage within
the permitted supply voltage range and there is no restriction on this voltage due to the magnitude of the voltage applied to the VCC terminal of
LM2901/2903 series comparator package. The output can also be used as a simple SPST switch to ground (when a pull-up resistor is not used).
The amount of current the output device can sink is limited by the drive available (which is independent of VCC) and the β of this device. When the
maximum current limit is reached (approximately 16mA), the output transistor will come out of saturation and the output voltage will rise very
rapidly. The output saturation voltage is limited by the approximately 60Ω RSAT of the output transistor. The low offset voltage of the output
transistor (1.0mV) allows the output to clamp essentially to ground level for small load currents.
LM2901Q/LM2901AQ/LM2903Q/LM2903AQ
Document number: DS37814 Rev. 2 - 2
10 of 19
www.diodes.com
June 2016
© Diodes Incorporated
LM2901Q/ LM2901AQ/
LM2903Q/ LM2903AQ
ADVANCED I NF ORMATION
Typical Application Circuit (VCC = 5.0 VDC)
+VIN
Basic Comparator
Vcc
3KΩ
Vo
+
-
+VREF
+VIN
Driving CMOS
5V
100KΩ
Vo
+
-
+VREF
½ LM2903/A
8
Driving TTL
+5VDC
10KΩ
Vo
+
-
+
-
V+
Vo
3KΩ
1MΩ
1MΩ
1MΩ
+VIN
Inverting Comparator with
Hysteresis
V+
+
-
V+
Vo
3KΩ
10MΩ
10KΩ
+VREF
Non-Inverting Comparator with
Hysteresis
+VIN
VIN
Comparator with a
Negative Reference
V+
5.1KΩ
Vo
+
-
-5 VDC
+
V
LM2901Q/LM2901AQ/LM2903Q/LM2903AQ
Document number: DS37814 Rev. 2 - 2
11 of 19
www.diodes.com
June 2016
© Diodes Incorporated
LM2901Q/ LM2901AQ/
LM2903Q/ LM2903AQ
ADVANCED I NF ORMATION
Typical Application Circuit (continued) (VCC = 5.0 VDC)
+
-
V+
Vo
2KΩ
100KΩ
200KΩ
200KΩ
0.1uF
Crystal Controlled Oscillator
V+
0
CRYSTAL
f = 100KHz
Output Strobing
V+
6.2KΩ
Vo
+
-
STROBE
INPUT
*Or logic gate without pull-up resistor
*
3KΩ
OR Gate
V+
f
+
-
200KΩ
1KΩ
+0.075V
1KΩ
100KΩ
100KΩ
100KΩ
A
B
C
0
V+
“0”"1”
t1t2
1MΩ
R1
1MΩ
R2
100KΩ
80pF
+
-
V+
Vo
15KΩ
1MΩ
D2
1N914
Pulse Generator
V+
0
D1
1N914
1MΩ
+15VDC
60us6us
t0
* For large ratios of R1/R2, D1 can
be omitted.
3KΩ
AND Gate
V+
f
+
-
39KΩ
1KΩ
+0.375V
1KΩ
100KΩ
100KΩ
100KΩ
A
B
C
0
V+
“0”"1”
D1
D4
D3
D2
3KΩ
Large Fan-in AND Gate
V+
Vout
+
-
100KΩ
100KΩ
A
B
C
0
V+
“0”"1”
D
10KΩ
LM2901Q/LM2901AQ/LM2903Q/LM2903AQ
Document number: DS37814 Rev. 2 - 2
12 of 19
www.diodes.com
June 2016
© Diodes Incorporated
LM2901Q/ LM2901AQ/
LM2903Q/ LM2903AQ
ADVANCED I NF ORMATION
Typical Application Circuit (cont.) (VCC = 5.0 VDC)
VIN
Limit Comparator
10KΩ
+
-
+VREF LOW
+
V+(12VDC)
+
-
2RS
+VREF HIGH
2RS
RS
2N2222
LAMP
12 ESB
Comparing Input Voltage of
Opposite Polarity
5.1KΩ
-VIN2
+
-
100KΩ
100KΩ
+VIN1
2N2222
ORing the Outputs
3.0KΩ
+
-
V+
+
-VO
1N914
5.1KΩ
Zero Crossing Detector
(Single Power Supply)
V+
Vo
+
-
100KΩ
10KΩ
0
V+
“0”"1”
5.1KΩ
5.1KΩ
100KΩ
20MΩ
VIN
t0t1
1N914
10KΩ
One-Shot Multivibrator
V+
Vo
+
-
1MΩ
1MΩ
0
+
t0
100pF
1MΩ
1N914
0.001uF PW V+
1ms 0
100KΩ
100KΩ
75pF
+
-
V+
Vo
4.3KΩ
100KΩ
Squarewave Oscillator
V+
0
100KΩ
V+
1:100KHz
LM2901Q/LM2901AQ/LM2903Q/LM2903AQ
Document number: DS37814 Rev. 2 - 2
13 of 19
www.diodes.com
June 2016
© Diodes Incorporated
LM2901Q/ LM2901AQ/
LM2903Q/ LM2903AQ
ADVANCED I NF ORMATION
Ordering Information
Part Number
Package
Code
Packaging
(Note 16)
13” Tape and Reel
Qualification Grade
(Note 17)
Quantity
Part Number Suffix
LM2901QT14-13
T14
TSSOP-14
2,500/Tape & Reel
-13
Automotive Compliant
LM2901AQT14-13
T14
TSSOP-14
2,500/Tape & Reel
-13
Automotive Compliant
LM2901QS14-13
S14
SO-14
2,500/Tape & Reel
-13
Automotive Compliant
LM2901AQS14-13
S14
SO-14
2,500/Tape & Reel
-13
Automotive Compliant
LM2903QS-13
S
SO-8
2,500/Tape & Reel
-13
Automotive Compliant
LM2903AQS-13
S
SO-8
2,500/Tape & Reel
-13
Automotive Compliant
LM2903QTH-13
TH
TSSOP-8
2,500/Tape & Reel
-13
Automotive Compliant
LM2903AQTH-13
TH
TSSOP-8
2,500/Tape & Reel
-13
Automotive Compliant
LM2903QM8-13
M8
MSOP-8
2,500/Tape & Reel
-13
Automotive Compliant
LM2903AQM8-13
M8
MSOP-8
2,500/Tape & Reel
-13
Automotive Compliant
Notes: 16. For packaging details, go to our website at http://www.diodes.com/products/packages.html.
17. LM2901Q/2903Q have been qualified to AEC-Q100 grade 1 and are classified as “Automotive Compliant” which supports PPAP documentation.
See LM2901/2903 datasheet for commercial qualified versions.
LM2901Q/LM2901AQ/LM2903Q/LM2903AQ
Document number: DS37814 Rev. 2 - 2
14 of 19
www.diodes.com
June 2016
© Diodes Incorporated
LM2901Q/ LM2901AQ/
LM2903Q/ LM2903AQ
ADVANCED I NF ORMATION
Marking Information
(1) TSSOP-14 and SO-14
(2) SO-8
(3) MSOP-8 and TSSOP-8
LM2901Q/LM2901AQ/LM2903Q/LM2903AQ
Document number: DS37814 Rev. 2 - 2
15 of 19
www.diodes.com
June 2016
© Diodes Incorporated
LM2901Q/ LM2901AQ/
LM2903Q/ LM2903AQ
ADVANCED I NF ORMATION
Package Outline Dimensions
Please see http://www.diodes.com/package-outlines.html for the latest version.
SO-14
SO-8
SO-14
Dim
Min
Max
A
1.47
1.73
A1
0.10
0.25
A2
1.45 Typ
B
0.33
0.51
D
8.53
8.74
E
3.80
3.99
e
1.27 Typ
H
5.80
6.20
L
0.38
1.27

0°
8°
All Dimensions in mm
SO-8
Dim
Min
Max
A
—
1.75
A1
0.10
0.20
A2
1.30
1.50
A3
0.15
0.25
b
0.3
0.5
D
4.85
4.95
E
5.90
6.10
E1
3.85
3.95
e
1.27 Typ
h
—
0.35
L
0.62
0.82

0°
8°
All Dimensions in mm
EH
A
A2
e
D
A1
L
Gauge Plane
Detail “A”
Detail “A”
7°(4x)
B
Gauge Plane
Seating Plane
Detail ‘A’
Detail ‘A’
E
E1
h
L
D
eb
A2
A1
A
45°7°~9°
A3
0.254
LM2901Q/LM2901AQ/LM2903Q/LM2903AQ
Document number: DS37814 Rev. 2 - 2
16 of 19
www.diodes.com
June 2016
© Diodes Incorporated
LM2901Q/ LM2901AQ/
LM2903Q/ LM2903AQ
ADVANCED I NF ORMATION
Package Outline Dimensions (Continued)
Please see http://www.diodes.com/package-outlines.html for the latest version.
TSSOP-14
MSOP-8
MSOP-8
Dim
Min
Max
Typ
A
1.10
A1
0.05
0.15
0.10
A2
0.75
0.95
0.86
A3
0.29
0.49
0.39
b
0.22
0.38
0.30
c
0.08
0.23
0.15
D
2.90
3.10
3.00
E
4.70
5.10
4.90
E1
2.90
3.10
3.00
E3
2.85
3.05
2.95
e
0.65
L
0.40
0.80
0.60
a
0°
8°
4°
x
0.750
y
0.750
All Dimensions in mm
TSSOP-8
TSSOP-14
Dim
Min
Max
a1
7° (4X)
a2
0°
8°
A
4.9
5.10
B
4.30
4.50
C

1.2
D
0.8
1.05
F
1.00 Typ
F1
0.45
0.75
G
0.65 Typ
K
0.19
0.30
L
6.40 Typ
All Dimensions in mm
TSSOP-8
Dim
Min
Max
Typ
a
0.09
A

1.20

A1
0.05
0.15
A2
0.825
1.025
0.925
b
0.19
0.30
c
0.09
0.20
D
2.90
3.10
3.025
e
0.65
E
6.40
E1
4.30
4.50
4.425
L
0.45
0.75
0.60
All Dimensions in mm
G
L
AK
a1
D
C
a2
F
F1
Pin# 1 Indent
Detail ‘A’
Detail ‘A’
0.25
Gauge Plane
Seating Plane
B
L
Gauge plane
See Detail C
D
E
A1
A2
A
e
a
Detail C
E1
b
D
c
A
A1
A2
e
Seating Plane
Gauge Plane
L
See Detail C
Detail C
c
a
E1
E3
A3
1
E
y
x
D
b
0.25
4x10°
4x10°
LM2901Q/LM2901AQ/LM2903Q/LM2903AQ
Document number: DS37814 Rev. 2 - 2
17 of 19
www.diodes.com
June 2016
© Diodes Incorporated
LM2901Q/ LM2901AQ/
LM2903Q/ LM2903AQ
ADVANCED I NF ORMATION
Suggested Pad Layout
Please see http://www.diodes.com/package-outlines.html for the latest version.
SO-14
SO-8
TSSOP-14
Dimensions
Value (in mm)
X
0.60
Y
1.50
C1
5.4
C2
1.27
Dimensions
Value (in mm)
X
0.60
Y
1.55
C1
5.4
C2
1.27
Dimensions
Value (in mm)
X
0.45
Y
1.45
C1
5.9
C2
0.65
X
C1
C2
Y
X
C1
C2
Y
X
C1
C2
Y
LM2901Q/LM2901AQ/LM2903Q/LM2903AQ
Document number: DS37814 Rev. 2 - 2
18 of 19
www.diodes.com
June 2016
© Diodes Incorporated
LM2901Q/ LM2901AQ/
LM2903Q/ LM2903AQ
ADVANCED I NF ORMATION
Suggested Pad Layout (Continued)
Please see http://www.diodes.com/package-outlines.html for the latest version.
MSOP-8
TSSOP-8
Dimensions
Value (in mm)
C
0.650
X
0.450
Y
1.350
Y1
5.300
Dimensions
Value (in mm)
X
0.45
Y
1.78
C1
7.72
C2
0.65
C3
4.16
G
0.20
X C
Y
Y1
Y
C3 C1
X
C2 G
LM2901Q/LM2901AQ/LM2903Q/LM2903AQ
Document number: DS37814 Rev. 2 - 2
19 of 19
www.diodes.com
June 2016
© Diodes Incorporated
LM2901Q/ LM2901AQ/
LM2903Q/ LM2903AQ
ADVANCED I NF ORMATION
IMPORTANT NOTICE
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
(AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes
without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the
application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or
trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume
all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated
website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel.
Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and
hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or
indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings
noted herein may also be covered by one or more United States, international or foreign trademarks.
This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the
final and determinative format released by Diodes Incorporated.
LIFE SUPPORT
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express
written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the
labeling can be reasonably expected to result in significant injury to the user.
B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the
failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any
use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related
information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its
representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems.
Copyright © 2016, Diodes Incorporated
www.diodes.com