1.27 mm pitch connector
For cable
IDC (1.27 mm)
SCSI-II, SCSI-III
● Configuration of product Part No.
Mating connectors:
PCS-XE series straight or right-angle through hole type female connector for PCB.
PCS-XE series SMT type female connector.
For use with housings: SCSI-II: PCS-E( )L( ). SCSI-III: PCS-XEM( )DL( )( )N
Required tools: Discrete wire tool: PCS-K1 or FHAT-918B and FHPT-918A. Flat cable tool: PCS-K4
IDC type male connector for cable
PCS-XE( )M( )( )+
➀➃➄➁➂
PCS-XE ( ) M ( ) ( )+
● Components
➀
➁
➂
➃
➄
Contacts
Shell
Insulator
Spacer
Cable cover
● Dimensions
Part No. ABCD
25.46
40.7
52.13
72.45
15.24
30.48
41.91
62.23
19.61
34.85
46.28
66.6
25.46
40.7
52.1
72.4
PCS-XE26M( )( )+
PCS-XE50M( )( )+
PCS-XE68M( )( )+
PCS-XE100M( )( )+
➀
Series name
➁
No. of contacts: 26, 50, 68 or 100
➂
Type of contact: Male
➃
Cable sizes for reference purposes (In case the cable insulation is made of PVC resin)
Blank : AWG#28(7 / 0.127) or AWG#30(1 / 0.254). Outside diameter of insulation is
0.8-1.0 mm. For discrete wire. (See Note #1)
A : AWG#28(7 / 0.127) or AWG#30(1 / 0.254). Outside diameter of insulation is
0.5-0.65 mm. For discrete wire.
B : AWG#30(7 / 0.1). Outside diameter of insulation is 0.5-0.65 mm. For discrete wire.
C : AWG#28(7 / 0.127) or AWG#30(1 / 0.254). For flat cable, t = 1.0 mm MAX.
(See Note #2)
E : AWG#30(7 / 0.1). For flat cable, t = 1.0 mm MAX. (See Note #2)
J : AWG#28(7 / 0.127) or AWG#30(1 / 0.254). Outside diameter of insulation is
0.65-0.8 mm. For discrete wire.
K : AWG#30(7 / 0.1). Outside diameter of insulation is 0.65-0.8 mm. For discrete wire.
Q : AWG#30(7 / 0.1). Outside diameter of insulation is 0.8-1.0 mm. For discrete wire.
➄
Contact plating
Blank : Min. 0.2 μm Gold plating
G1 : Min. 0.76 μm Gold plating
D
4-R1.04
1.27
B
A
LAST POS.
7.3
5.7
2.54
POS.#1
LAST POS.
C
13.2
5
1.27 B
POS.#1
POS.#2
POS.#2
15˚
➀
➃
➄
➁
➂
Cable cover for discrete wire
Cable cover for flat cable
For 68 or 100-contact connector
Note 1: P/N PCS-XE100M+ is not available.
Note 2: This 100-contact connector is not available
for flat cable. (C, E)
Because some combinations of “Configurations of Product
Part No.”, are under consideration for development, please
contact us for availability details.
Others
Wire
wrapping
CrimpingSolderingIDCPress-inSMT
Through
hole
