XWD SERIES DUAL 1 5 0 W AT T k e y * * * * f e a t u r e s high power package wide input range 4 input voltage ranges water washable * * * * trim and enable pins remote sense pins 500 VDC isolation short circuit protection The XWD series are high powered dual output DC to DC converters that cover a wide range of applications. Available input voltages include 12V, 24V, 48V, and 60V, ouput voltages are available from 5V to 15V. The XWD features remote sense leads for accurate point of load regulation, and has short circuit and over current protection. For single and triple output high power solutions, see IPD's XWS and XWT series of converters. t e c h n i c a l s p e c i f i c a t i o n s i n p u t voltage range 12 VDC nominal 24 VDC nominal 48 VDC nominal 40 VDC nominal (wide input) input ripple current reverse input current 10 - 20 VDC 18 - 36 VDC 36 - 72 VDC 20 - 60 VDC 20% Iin max 100% Iin max o u t p u t setpoint accuracy line regulation VIN min. - VIN max., IOUT rated load regulation IOUT min. - IOUT max., VIN nom. minimum output current dynamic regulation, loadstep Pk deviation settling time voltage trim range current limit threshold range, %Io rated 1% 1% Vo 1% Vo 10 % 25% Io 4% Vo 500 uS 10% 110% - 130% e f f . v s l o a d (4 8 V I N ) e f f . v s l o a d (2 4 V I N ) g e n e r a l turn-on time remote shutdown switching frequency isolation input - output temperature coefficient case temperature operating range storage range thermal shutdown range humidity max, non-condensing vibration, 3 axes, 5 min each MTBF (Bellcore TR-NWT-000332) safety weight (approx.) 10 ms TTL and CMOS compatible, positive logic 200 KHz 500 VDC 0.02%/C -25 to +85C -40 to +125C 105 to 115C 95% 5 g, 10 - 55Hz consult factory consult factory 15.4 oz. n o t e s MTBF predictions may vary slightly from model to model. industrial temp range of -40 to +85C available Specifications typically at 25C, normal line, and full load unless otherwise stated. Specifications subject to change without notice. 108 8 8 8 - I P D 4 7 3 C O N V e r t e r 2 6 6 8 w w w . i p d c o n v e r t e r s . c o m DUAL 1 5 0 W AT T m o d e l s V IN (volts) V IN r a n g e (volts) I I N m ax. * (amps) 10 - 20 10 - 20 10 - 20 18 - 36 18 - 36 18 - 36 36 - 72 36 - 72 36 - 72 20 - 60 20 - 60 20 - 60 14.0 16.9 16.7 11.3 13.3 13.3 5.5 6.5 6.5 10.3 12.2 12.2 12 12 12 24 24 24 48 48 48 40 40 40 V OUT (volts) I OUT r a t e d (amps) 5 12 15 5 12 15 5 12 15 5 12 15 10 5.2 4.15 15 7.5 6.0 15 7.5 6.0 15 7.5 6.0 50 120 150 50 120 150 50 120 150 50 120 150 efficiency typ.** 79% 81% 82% 82% 83% 83% 84% 85% 85% 80% 81% 81% model XWD1205 XWD1212 XWD1215 XWD2405 XWD2412 XWD2415 XWD4805 XWD4812 XWD4815 XWD6005 XWD6012 XWD6015 for terminal strip add suffix -TS to part number for heatsink add suffix -HS to part number * max input current an minimum input voltage, maximum rated output power ** at nominal VIN, rated output. specifications are subject to change without notice. m e c h a n i c a l ripple & noise pk-pk (mV) d r a w i n g .041 13PLS. (1.04) #4-40 THREADED INSERTS 4PLS. .52 (13.2) 1 8 2 9 .18 (4.6) 10 3 BOTTOM VIEW 4 11 5 12 6 13 7 14 .25 (6.3) .375EA. 3.000 3.50 (9.53) (76.20)(88.90) .92 (23.37) 4.300 (109.22) 5.50 (139.70) t h e r m a l i m p e d a n c e natural convection 100 LFM 200 LFM 300 LFM 400 LFM 2.5 C/W 2.1 C/W 1.7 C/W 1.3 C/W 1.1 C/W Thermal impedance data is dependant on many environmental factors. The exact thermal performance should be validated for specific application. 8 8 8 - I P D 4 7 3 C O N V e r t e r 2 6 6 8 p i n 1 2 3 4 5 6 7 8 9 10 11 12 13 14 f u n c t i o n No pin -VIN -VIN +VIN +VIN enable case -V1 sense -V1OUT +V1OUT +V1 sense1 - V2OUT trim + V2OUT t o l e r a n c e s (unless otherwise specified) Inches .XX .040 .XXX .010 (Millimeters) .X 1.0 .XX .25 Pin: .002 .05 w w w . i p d c o n v e r t e r s . c o m 109