TC Vishay Sprague Subminiature, Leaded Solid Tantalum Capacitors Polar or Non-polar FEATURES * Subminiature package size and light weight * Rectangular case with axial or radial leads * 2 to 50 VDC * 0.1F to 470F * Operating temperature range : - 55C to + 125C * High stability and reliability * Tested in accordance with MIL-PRF-49137 * Unique and comprehensive custom design capability ELECTRICAL CHARACTERISTICS APPLICATIONS Operating temperature range: - 55C to + 125C Capacitance: Measured at 120 Hz and 25C with a maximum of 2.2 VDC bias and 1.0 volt rms signal. Capacitance Tolerance: Standard tolerance is 20% for ratings 0.1F and above, and + 40, - 20% for ratings below 0.1F. Special tolerances are also available. * Hearing aids * Portable communications * Space/avionics Dissipation Factor: When measured simultaneously with capacitance, DF shall not exceed the value shown in the ratings tables. * Laptop computers. DC Leakage Current (DCL Max): MECHANICAL SPECIFICATIONS When measured with DC voltage applied through a 1,000 resistor for 5 minutes, DC leakage (A) shall not exceed: At @ 25C: Leakage current shall not exceed the values listed in the Standard Ratings Tables At @ 85C: Leakage current shall not exceed 10 times the values listed in the Standard Ratings Tables At @ 125C and 66% of rated voltage: Leakage current shall not exceed 15 times the values listed in the Standard Ratings Tables. Operating Voltage: Full working voltage up to 85C. From 85C to 125C working voltage derates linearly to 66% of the 85C working voltage. Solder coated nickel leads (type N32 per MIL-STD-1276) are standard on all case sizes. Leads are weldable and/or solderable. Special leads are available on request (e.g. bare nickle, gold plated nickle or ribbon leads). Lead length is 1 1/2" [38.1 mm] minimum on nonpolar parts. On polar parts the negative lead is 1-1/4" [31.8mm] minimum and the positive lead is 1-1/2" [38.1mm] minimum. ORDERING INFORMATION TC MODEL 1.0 CAPACITANCE IN F 35 DC VOLTAGE RATING AT + 85C C7 CASE CODE A* LEAD CONFIGURATION M CAPACITANCE TOLERANCE C = Polar N = Nonpolar A = Axial R = Radial E = +40, -20% M = 20% K = 10% J = 5% Example of Part Number Code: TC1.0-35C7AM * To complete part number in rating tables, add A or R. Change suffix if special capacitance tolerance is required. www.vishay.com 74 For technical questions, contact tantalum@vishay.com Document Number: 43005 Revision 08-Nov-04 TC Vishay Sprague Subminiature, Leaded Solid Tantalum Capacitors Polar or Non-polar DIMENSIONS in inches [millimeters] POLAR STYLE RADIAL AXIAL T Red Epoxy T Polarity Dot W d W (+) 3rd Dot 3rd Dot L 2nd Dot 2nd Dot L 1st Dot L 1st Dot Tolerance Dot Tolerance Dot d (+) (-) E The 3rd dot is on the end of the CX size CASE CODE CX C0 C1 C2 C3 C4 C5 C6 L MAX 0.075 [1.91] 0.100 [2.54] 0.125 [3.18] 0.165 [4.19] 0.225 [5.72] 0.290 [7.37] 0.310 [7.87] 0.475 [12.07] W MAX 0.050 [1.27] 0.050 [1.27] 0.070 [1.78] 0.120 [3.05] 0.185 [4.70] 0.220 [5.59] 0.230 [5.84] 0.375 [9.53] T MAX 0.040 [1.02] 0.040 [1.02] 0.040 [1.02] 0.070 [1.78] 0.075 [1.91] 0.110 [2.79] 0.130 [3.30] 0.150 [3.81] E TOL E 0.030 [0.76] 0.030 [0.76] 0.050 [1.27] 0.100 [2.54] 0.150 [3.81] 0.180 [4.57] 0.200 [[5.08] 0.300 [7.62] d 0.007 [0.18] 0.007 [0.18] 0.010 [0.25] 0.010 [0.25] 0.010 [0.25] 0.016 [0.41] 0.016 [0.41] 0.016 [0.41] 0.015 [0.38] 0.015 [0.38] 0.015 [0.38] 0.020 [0.51] 0.020 [0.51] 0.25 [0.64] 0.025 [0.64] 0.025 [0.64] NON POLAR STYLE RADIAL AXIAL T T W W d Tolerance Dot Tolerance Dot 2nd Dot 2nd Dot LA 1st Dot LR 1st Dot 3rd Dot 3rd Dot d (-) (+) E CASE LA LR MAX W MAX T MAX E MAX E TOL d N1 0.220 [5.59] 0.280 [7.11] 0.370 [9.40] 0.390 [9.91] 0.180 [4.57] 0.240 [6.10] 0.315 [8.00] 0.335 [8.51] 0.125 [3.18] 0.140 [3.56] 0.180 [4.57] 0.230 [5.84] 0.125 [3.18] 0.180 [4.57] 0.220 [5.59] 0.230 [5.84] 0.100 [2.54] 0.100 [2.54] 0.150 [3.81] 0.180 [4.57] 0.020 [0.51] 0.025 [0.64] 0.025 [0.64] 0.025 [0.64] N2 N3 N4 Document Number: 43005 Revision 08-Nov-04 For technical questions, contact tantalum@vishay.com CODE 0.010 [0.25] 0.010 [0.25] 0.016 [0.41] 0.016 [0.41] www.vishay.com 75 TC Vishay Sprague Subminiature, Leaded Solid Tantalum Capacitors Polar or Non-polar STANDARD RATINGS - POLAR CAPACITORS CAPACITANCE (F) MAX DF (%) 0.47 0.68 1.0 2.2 10 33 100 150 470 10 10 10 10 10 10 15 15 20 1.5 6.8 22 68 100 330 10 10 10 10 10 20 0.33 1.0 4.7 15 47 68 220 10 8 8 8 8 8 15 0.22 0.68 3.3 10 33 47 150 10 6 6 6 6 6 10 0.0010 0.0010 0.0015 0.0015 0.0022 0.0022 0.0033 0.0033 0.0047 0.0047 0.15 0.47 2.2 6.8 22 33 100 10 10 10 10 10 10 10 10 10 10 10 6 6 6 6 6 8 MAX. DCL @ + 25C (A) 2 WVDC @ + 85C 0.5 0.5 0.5 0.5 0.5 1.0 2.0 3.0 9.0 3 WVDC @ + 85C 0.5 0.5 1.0 2.0 3.0 9.0 4 WVDC @ + 85C 0.5 0.5 0.5 1.0 2.0 3.0 9.0 6 WVDC @ + 85C 0.5 0.5 0.5 1.0 2.0 3.0 9.0 10 WVDC @ + 85C 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 1.0 2.0 3.0 9.0 CASE CODE PART NUMBER C0 C0 C0 C1 C2 C3 C4 C5 C6 TC.47-2C0*M TC.68-2C0*M TC1.0-2C0*M TC2.2-2C1*M TC10-2C2*M TC33-2C3*M TC100-2C4*M TC150-2C5*M TC470-2C6*M C1 C2 C3 C4 C5 C6 TC1.5-3C1*M TC6.8-3C2*M TC22-3C3*M TC68-3C4*M TC100-3C5*M TC330-3C6*M C0 C1 C2 C3 C4 C5 C6 TC.33-4C0*M TC1.0-4C1*M TC4.7-4C2*M TC15-4C3*M TC47-4C4*M TC68-4C5*M TC220-4C6*M C0 C1 C2 C3 C4 C5 C6 TC.22-6C0*M TC.68-6C1*M TC3.3-6C2*M TC10-6C3*M TC33-6C4*M TC47-6C5*M TC150-6C6*M C0 C1 C0 C1 C0 C1 C0 C1 C0 C1 C0 C1 C2 C3 C4 C5 C6 TC.0010-10C0*E TC.0010-10C1*E TC.0015-10C0*E TC.0015-10C1*E TC.0022-10C0*E TC.0022-10C1*E TC.0033-10C0*E TC.0033-10C1*E TC.0047-10C0*E TC.0047-10C1E TC.15-10C0*M TC.47-10C1*M TC2.2-10C2*M TC6.8-10C3*M TC22-10C4*M TC33-10C5*M TC100-10C6*M *Add A for axial, R for radial www.vishay.com 76 For technical questions, contact tantalum@vishay.com Document Number: 43005 Revision 08-Nov-04 TC Subminiature, Leaded Solid Tantalum Capacitors Polar or Non-polar Vishay Sprague STANDARD RATINGS - POLAR CAPACITORS CAPACITANCE (F) MAX DF (%) MAX. DCL @ + 25C (A) 15 WVDC @ + 85C CASE CODE PART NUMBER 0.10 10 0.5 C0 TC.10-15C0*M 0.33 6 0.5 C1 TC.33-15C1*M 1.5 6 0.5 C2 TC1.5-15C2*M 15 6 2.0 C4 TC15-15C4*M 22 6 3.0 C5 TC22-15C5*M 68 8 9.0 C6 TC68-15C6*M 0.0068** 10 0.5 C0 TC.0068-20C0*E 0.010** 10 0.5 C0 TC.010-20C0*E 20 WVDC @ + 85C 0.010** 6 0.5 C1 TC.010-20C1*E 0.015** 10 0.5 C0 TC.015-20C0*E 0.015** 6 0.5 C1 TC.015-20C1*E 0.022** 10 0.5 C0 TC.022-20C0*E 0.022** 6 0.5 C1 TC.022-20C1*E 0.033** 10 0.5 C0 TC.033-20C0*E 0.033** 6 0.5 C1 TC.033-20C1*E 0.047** 10 0.5 C0 TC.047-20C0*E 0.047** 6 0.5 C1 TC.047-20C1*E 0.068** 10 0.5 C0 TC.068-20C0*E 0.068** 6 0.5 C1 TC.068-20C1*E 0.10 6 0.5 C1 TC.10-20C1*M 0.15 6 0.5 C1 TC.15-20C1*M 0.22 6 0.5 C1 TC.22-20C1*M 1.0 6 0.5 C2 TC1.0-20C2*M 3.3 6 1.0 C3 TC3.3-20C3*M 4.7 6 1.0 C3 TC4.7-20C3*M 10 6 2.0 C4 TC10-20C4*M 15 6 3.0 C5 TC15-20C5*M 47 8 9.0 C6 TC47-20C6*M 0.68 6 0.5 C2 TC.68-25C2*M 2.2 6 1.0 C3 TC2.2-25C3*M 6.8 6 2.0 C4 TC6.8-25C4*M 10 6 3.0 C5 TC10-25C5*M 33 6 9.0 C6 TC33-25C6*M 25 WVDC @ + 85C 35 WVDC @ + 85C 0.22 6 0.5 C2 TC.22-35C2*M 0.33 6 0.5 C2 TC.33-35C2*M 0.47 6 0.5 C2 TC.47-35C2*M 0.68 6 1.0 C3 TC.68-35C3*M *Add A for axial, R for radial ** Ratings will be discontinued 60 days after revision date Document Number: 43005 Revision 08-Nov-04 For technical questions, contact tantalum@vishay.com www.vishay.com 77 TC Vishay Sprague Subminiature, Leaded Solid Tantalum Capacitors Polar or Non-polar STANDARD RATINGS - POLAR CAPACITORS CAPACITANCE (F) MAX DF (%) 1.0 6 1.5 2.2 MAX. DCL @ + 25C (A) CASE CODE PART NUMBER 1.0 C3 TC1.0-35C3*M 6 1.0 C3 TC1.5-35C3*M 6 2.0 C4 TC2.2-35C4*M 3.3 6 2.0 C4 TC3.3-35C4*M 4.7 6 2.0 C4 TC4.7-35C4*M 6.8 6 3.0 C5 TC6.8-35C5*M 10 6 9.0 C6 TC10-35C6*M 15 6 9.0 C6 TC15-35C6*M 22 6 9.0 C6 TC22.35C6*M 35 WVDC @ + 85C 50 WVDC @ + 85C 0.15 6 0.5 C2 TC.15-50C2*M 4.7 6 3.0 C5 TC4.7-50C5*M 6.8 6 9.0 C6 TC6.8-50C6*M CASE CODE PART NUMBER N1 N2 N3 N4 TC4.7-2N1*M TC15-2N2*M TC47-2N3*M TC68-2N4*M N1 N2 N3 N4 TC3.3-3N1*M TC10-3N2*M TC33-3N3*M TC47-3N4*M N1 N2 N3 N4 TC2.2-4N1*M TC6.8-4N2*M TC22-4N3*M TC33-4N4*M N1 N2 N3 N4 TC1.5-6N1*M TC4.7-6N2*M TC15-6N3*M TC22-6N4*M N1 N2 N3 N4 TC1.0-10N1*M TC3.3-10N2*M TC10-10N3*M TC15-10N4*M N1 N3 N4 TC.68-15N1*M TC6.8-15N3*M TC10-15N4*M *Add A for axial, R for radial STANDARD RATINGS - NON-POLAR CAPACITORS CAPACITANCE (F) MAX DF (%) 4.7 15 47 68 10 10 15 15 3.3 10 33 47 10 10 10 10 2.2 6.8 22 33 8 8 8 8 1.5 4.7 15 22 6 6 6 6 1.0 3.3 10 15 6 6 6 6 0.68 6.8 10 6 6 6 MAX. DCL @ + 25C (F) 2 WVDC @ + 85C 0.5 1.0 2.0 3.0 3 WVDC @ + 85C 0.5 1.0 2.0 3.0 4 WVDC @ + 85C 0.5 1.0 2.0 3.0 6 WVDC @ + 85C 0.5 1.0 2.0 3.0 10 WVDC @ + 85C 0.5 1.0 2.0 3.0 15 WVDC @ + 85C 0.5 2.0 3.0 *Add A for axial, R for radial www.vishay.com 78 For technical questions, contact tantalum@vishay.com Document Number: 43005 Revision 08-Nov-04 TC Subminiature, Leaded Solid Tantalum Capacitors Polar or Non-polar Vishay Sprague STANDARD RATINGS - NON-POLAR CAPACITORS CAPACITANCE (F) MAX DF (%) MAX. DCL @ + 25C (A) 20 WVDC @ + 85C CASE CODE PART NUMBER 0.47 6 0.5 N1 TC.47-20N1*M 1.5 6 1.0 N2 TC1.5-20N2*M 2.2 6 1.0 N2 TC2.2-20N2*M 4.7 6 2.0 N3 TC4.7-20N3*M 6.8 6 3.0 N4 TC6.8-20N4*M 0.33 6 0.5 N1 TC.33-25N1*M 1.0 6 1.0 N2 TC1.0-25N2*M 3.3 6 2.0 N3 TC3.3-25N3*M 4.7 6 3.0 N4 TC4.7-25N4*M 25 WVDC @ + 85C 35 WVDC @ + 85C 0.10 6 0.5 N1 TC.10-35N1*M 0.15 6 0.5 N1 TC.15-35N1*M 0.22 6 0.5 N1 TC.22-35N1*M 0.33 6 1.0 N2 TC.33-35N2*M 0.47 6 1.0 N2 TC.47-35N2*M 0.68 6 1.0 N2 TC.68-35N2*M 1.0 6 2.0 N3 TC1.0-35N3*M 1.5 6 2.0 N3 TC1.5-35N3*M 2.2 6 2.0 N3 TC2.2-35N3*M 3.3 6 3.0 N4 TC3.3-35N4*M N4 TC2.2-50N4*M 50 WVDC @ + 85C 2.2 6 3.0 *Add A for axial, R for radial MARKING TC Capacitors case sizes C3 - C6 and N2 - N4 are print marked: All other case sizes are have color dot marking: Capacitance Color - Capacitance is in picofarads In picofarads, indicated by 3 dots. Black 0 1st and 2nd dot give Brown 1 - 1st and 2nd digits are significant figures - 3rd digit indicates the number of zeros. Capacitance Tolerance Is indicated by a dot on the side of the case. Black dot is omitted. Color Gold Silver None None Tolerance 5% 10% 20% + 40%/- 20% The positive lead is indicated by a color dot of red epoxy on the unit. Document Number: 43005 Revision 08-Nov-04 Digit the significant digits. Red 2 3rd dot indicates the number Orange 3 of zeros. Yellow 4 Color dot location is shown on Green 5 the dimensional sketches. Blue 6 Black dot is omitted on black sleeve. Violet 7 Grey 8 White 9 e.g. Yellow-Violet-Green = 4,700,000 pf For technical questions, contact tantalum@vishay.com = 4.7 F www.vishay.com 79 TC Vishay Sprague Subminiature, Leaded Solid Tantalum Capacitors Polar or Non-polar PERFORMANCE AND RELIABILITY The capacitors are tested in accordance with MIL-PRF49137, with specific requirements as follows: IMPEDANCE vs. FREQUENCY Temperature Stability: When tested per MIL-PRF-49137/ 6, capacitance shall be within +/-15% at -55C and 85C, and +/-10% at 25C after exposure to temperature extremes. DF shall be within 200% of initial limit at - 55C, 150% of initial limit at 85C, and meet the initial at 25C. DCL shall be within 10 x initial limit at 85C, and meet the initial limit at 25C. Life: (per Method 108 of MIL-STD-202) after 1,000 hours at 85C and rated voltage; capacitance shall be within +/-10% of initial limit, DF within initial limits, and leakage within 200% of initial limit. Surge Voltage: (per MIL-PRF-49317) After 1,000 cycles at 85C and 1.3 x WVDC; capacitance shall be within +/-10% of initial limit, DF and leakage within initial limits. Resistance to Soldering Heat: (per Method 210 0f MILSTD-202, Condition B) After immersion in 260C molten solder to within a 1/4" of the body of the unit, there shall be no evidence of mechanical or electrical degradation. Solderability: (per Method 208 of MIL-STD-202) After dipping leads in 235C molten solder to within .125" of the body of the unit, the solder shall cover 95% of the lead surface. CAPACITANCE VS. TEMPERATURE CHANGE IN CAPACITANCE % +10 (MFD-WVDC) +5 S C PE IF I AT IC 10 0 1 F 00 -1 -5 E SP CI FI 0V TI CA TYP ON F 0 ICAL -1 H1 0V 20 V 0. 7 0. 200 100 50 20 10 5.0 2.0 4.7 1.0 F -20 0.5 V 0.2 0.1 100 500 1 Hz 2 KHz 5 10 20 50 100 FREQUENCY 500 1 KHz 2 5 10 MHz LEAKAGE CURRENT - TEMPERATURE 1.0 (MFD-WVDC) 1F-20V 100F-10V 0.1 0.01 -40 -10 04 F -2 0V 0 0. 47 04 F 7 -2 F- 0V 35 V 0.0 4 7 0.0 47 F-50 F -35 V V 4.7 4.7 F-1 F 0V -20 V 500 ON -10 -40 (MFD-WVDC) 1K D.C. LEAKAGE CURRENT (A) Terminal Strength: (per Method 211 of MIL-STD-202) After the following test there shall be no loosening of the terminals or permanent damage to the terminals. Test Condition A: (Pull Test) 0.010" leads withstand 1 pound, 0.016" leads 2 pounds and 0.007" leads 1/2 pound. Test Condition C: (Bend Test) All leads shall withstand 3-90 bends with a 1/2 pound applied force. 5K 2K IMPEDANCE-OHMS Moisture Resistance: (per Method 106 of MIL-STD-202) After 10 cycles of 24 hours at 25C to 65C and 80-98% RH; capacitance shall be within +/-15% of initial value, DF within 1.5 x initial limit and leakage within 3 x initial limit. 10K +25 +85 -10 +100 0 +20 +85 TEMPERATURE C TEMPERATURE 0C www.vishay.com 80 For technical questions, contact tantalum@vishay.com Document Number: 43005 Revision 08-Nov-04