HMI ComponentsEdition 09/2016
Characteristics
The Series 92 with its short stroke
pushbuttons, making it especially
suited for:
PCB mounting
This series can be used to replace a
membrane keypad if only a few buttons
are needed.
Functions
The Series 92 incorporates the
following functions:
Indicator
Pushbutton
Illuminated pushbutton
Market segments
The EAO Series 92 is especially suited
for applications in the segments:
Machinery and Automation
Medicinal technology
Laboratory and measuring equipment
Series 92
Please refer to the EAO website to obtain detailed information regarding this series www.products.eao.com
Configure a product to your exact needs and request a quotation.
3
Content
Overview
PCB pushbuttons
Indicator 4
Pushbutton 6
Illuminated pushbutton 7
Indicator actuator 9
Pushbutton actuator 10
Illuminated pushbutton actuator 12
Accessories 14
Drawings 21
Technical data 22
Marking 23
Application guidelines 24
Index 27
92
4
PCB pushbuttons
4 max.
12 3.6
3.4 IP 40
4 IP 67
NJO
±
NJO
±
Indicator
Product can differ from the current configuration. Dimensions
Mounting cut-outs
Additional Information
• Transparent lens and pressure plate
• IP 67 version without bezel
Equipment consisting of (schematic overview)
Lens
Actuator
Bezel
Fixing nut
Mounting flange page 19
LED page 18
Illumination ele-
ment page 16
Each Part Number listed below includes all the black
components shown in the 3D-drawing.
To obtain a complete unit, please select the red com-
ponents from the pages shown.
Front protection Front Pressure plate Lens Part No. Weight
Indicator actuator, Front dimension 18.8 x 18.8 mm
IP 67 Plastic white Plastic red 92-043.200 0.003 kg
Plastic orange 92-043.300 0.003 kg
Plastic yellow 92-043.400 0.003 kg
Plastic green 92-043.500 0.003 kg
Plastic blue 92-043.600 0.003 kg
Plastic colourless 92-043.700 0.003 kg
Plastic black Plastic red 92-143.200 0.003 kg
Plastic orange 92-143.300 0.003 kg
Plastic yellow 92-143.400 0.003 kg
Plastic green 92-143.500 0.003 kg
Plastic blue 92-143.600 0.003 kg
Plastic colourless 92-143.700 0.003 kg
Indicator actuator, Front dimension 18.4 x 18.4 mm
IP 40 Plastic white Plastic smoked 92-058.100 0.003 kg
Plastic red 92-058.200 0.003 kg
Plastic orange 92-058.300 0.003 kg
Plastic yellow 92-058.400 0.003 kg
Plastic green 92-058.500 0.003 kg
Plastic blue 92-058.600 0.003 kg
Plastic colourless 92-058.700 0.003 kg
92
5
PCB pushbuttons
Front protection Front Pressure plate Lens Part No. Weight
IP 40 Plastic black Plastic smoked 92-158.100 0.003 kg
Plastic red 92-158.200 0.003 kg
Plastic orange 92-158.300 0.003 kg
Plastic yellow 92-158.400 0.003 kg
Plastic green 92-158.500 0.003 kg
Plastic blue 92-158.600 0.003 kg
Plastic colourless 92-158.700 0.003 kg
92
6
PCB pushbuttons
4 max.
12 3.6
3.4 IP 40
4 IP 67
NJO
±
NJO
±
Wiring diagram 1
Pushbutton
Product can differ from the current configuration. Dimensions
Mounting cut-outs
Additional Information
• Lens opaque
• IP 67 version without bezel
Equipment consisting of (schematic overview)
Lens
Actuator
Bezel
Fixing nut
Mounting flange page 19
Switching ele-
ment page 16
Each Part Number listed below includes all the black
components shown in the 3D-drawing.
To obtain a complete unit, please select the red com-
ponents from the pages shown.
Front protection Front Pressure plate Lens Switching action Part No.
Wiring
diagram
Weight
Pushbutton actuator, Front dimension 18.8 x 18.8 mm
IP 67 Plastic white Plastic black B 92-341.000 1 0.002 kg
Plastic grey B 92-341.800 1 0.002 kg
Plastic black Plastic black B 92-441.000 1 0.002 kg
Plastic grey B 92-441.800 1 0.002 kg
Pushbutton actuator, Front dimension 18.4 x 18.4 mm
IP 40 Plastic white Plastic black B 92-356.000 1 0.002 kg
Plastic grey B 92-356.800 1 0.002 kg
Plastic white B 92-356.900 1 0.002 kg
Plastic black Plastic black B 92-456.000 1 0.002 kg
Plastic grey B 92-456.800 1 0.002 kg
Plastic white B 92-456.900 1 0.002 kg
Switching action: B = Momentary
92
7
PCB pushbuttons
4 max.
12 3.6
3.4 IP 40
4 IP 67
NJO
±
NJO
±
Illuminated pushbutton
Product can differ from the current configuration. Dimensions
Mounting cut-outs
Additional Information
• Transparent lens and pressure plate
• IP 67 version without bezel
Equipment consisting of (schematic overview)
Lens
Actuator
Bezel
Fixing nut
Mounting flange page 19
LED page 18
Switching ele-
ment page 16
Each Part Number listed below includes all the black
components shown in the 3D-drawing.
To obtain a complete unit, please select the red com-
ponents from the pages shown.
Front protection Front Pressure plate Lens Switching action Part No.
Wiring
diagram
Weight
Illuminated pushbutton actuator, Front dimension 18.8 x 18.8 mm
IP 67 Plastic white Plastic red B 92-343.200 1 0.003 kg
Plastic orange B 92-343.300 1 0.003 kg
Plastic yellow B 92-343.400 1 0.003 kg
Plastic green B 92-343.500 1 0.003 kg
Plastic blue B 92-343.600 1 0.003 kg
Plastic colourless B 92-343.700 1 0.003 kg
Plastic black Plastic red B 92-443.200 1 0.003 kg
Plastic orange B 92-443.300 1 0.003 kg
Plastic yellow B 92-443.400 1 0.003 kg
Plastic green B 92-443.500 1 0.003 kg
Plastic blue B 92-443.600 1 0.003 kg
Plastic colourless B 92-443.700 1 0.003 kg
Illuminated pushbutton actuator, Front dimension 18.4 x 18.4 mm
IP 40 Plastic white Plastic smoked B 92-358.100 1 0.003 kg
Plastic red B 92-358.200 1 0.003 kg
Plastic orange B 92-358.300 1 0.003 kg
Plastic yellow B 92-358.400 1 0.003 kg
Plastic green B 92-358.500 1 0.003 kg
Plastic blue B 92-358.600 1 0.003 kg
Plastic colourless B 92-358.700 1 0.003 kg
92
8
PCB pushbuttons
Wiring diagram 1
Front protection Front Pressure plate Lens Switching action Part No.
Wiring
diagram
Weight
IP 40 Plastic black Plastic smoked B 92-458.100 1 0.003 kg
Plastic red B 92-458.200 1 0.003 kg
Plastic orange B 92-458.300 1 0.003 kg
Plastic yellow B 92-458.400 1 0.003 kg
Plastic green B 92-458.500 1 0.003 kg
Plastic blue B 92-458.600 1 0.003 kg
Plastic colourless B 92-458.700 1 0.003 kg
Switching action: B = Momentary
92
9
PCB pushbuttons
4 max.
12 3.6
3.4 IP 40
4 IP 67
NJO
±
NJO
±
Indicator actuator IP 67
Product can differ from the current configuration. Dimensions
Mounting cut-outs
Equipment consisting of (schematic overview)
Pressure plate page 14
Front bezel
Actuator
Fixing nut
Mounting flange page 19
LED page 18
Illumination ele-
ment page 16
Each Part Number listed below includes all the black
components shown in the 3D-drawing.
To obtain a complete unit, please select the red com-
ponents from the pages shown.
Front Part No. Weight
Indicator actuator IP 67, Front dimension 18.8 x 18.8 mm
Plastic black 92-140.000 0.003 kg
92
10
PCB pushbuttons
4 max.
12 3.6
3.4 IP 40
4 IP 67
NJO
±
NJO
±
Wiring diagram 1
Pushbutton actuator IP 40
Product can differ from the current configuration. Dimensions
Mounting cut-outs
Equipment consisting of (schematic overview)
Lens page 14
Actuator
Bezel page 15
Fixing nut
Mounting flange page 19
Switching ele-
ment page 16
Each Part Number listed below includes all the black
components shown in the 3D-drawing.
To obtain a complete unit, please select the red com-
ponents from the pages shown.
Front Switching action Part No.
Wiring
diagram
Weight
Pushbutton actuator IP 40, Front dimension 18.4 x 18.4 mm
Plastic white B 92-350.000 1 0.003 kg
Plastic black B 92-450.000 1 0.003 kg
Switching action: B = Momentary
92
11
PCB pushbuttons
4 max.
12 3.6
3.4 IP 40
4 IP 67
NJO
±
NJO
±
Wiring diagram 1
Pushbutton actuator IP 67
Product can differ from the current configuration. Dimensions
Mounting cut-outs
Equipment consisting of (schematic overview)
Pressure plate page 14
Front bezel
Actuator
Fixing nut
Mounting flange page 19
Switching ele-
ment page 16
Each Part Number listed below includes all the black
components shown in the 3D-drawing.
To obtain a complete unit, please select the red com-
ponents from the pages shown.
Front Switching action Part No.
Wiring
diagram
Weight
Pushbutton actuator IP 67, square 18.8 x 18.8 mm
Plastic white B 92-340.000 1 0.003 kg
Plastic black B 92-440.000 1 0.003 kg
Switching action: B = Momentary
92
12
PCB pushbuttons
4 max.
12 3.6
3.4 IP 40
4 IP 67
NJO
±
NJO
±
Wiring diagram 1
Illuminated pushbutton actuator IP 40
Product can differ from the current configuration. Dimensions
Mounting cut-outs
Equipment consisting of (schematic overview)
Lens page 14
Actuator
Bezel page 15
Fixing nut
Mounting flange page 19
LED page 18
Switching ele-
ment page 16
Each Part Number listed below includes all the black
components shown in the 3D-drawing.
To obtain a complete unit, please select the red com-
ponents from the pages shown.
Front Switching action Part No.
Wiring
diagram
Weight
Illuminated pushbutton actuator IP 40, Front dimension 18.4 x 18.4 mm
Plastic white B 92-350.000 1 0.003 kg
Plastic black B 92-450.000 1 0.003 kg
Switching action: B = Momentary
92
13
PCB pushbuttons
4 max.
12 3.6
3.4 IP 40
4 IP 67
NJO
±
NJO
±
Wiring diagram 1
Illuminated pushbutton actuator IP 67
Product can differ from the current configuration. Dimensions
Mounting cut-outs
Equipment consisting of (schematic overview)
Pressure plate page 14
Front bezel
Actuator
Fixing nut
Mounting flange page 19
LED page 18
Switching ele-
ment page 16
Each Part Number listed below includes all the black
components shown in the 3D-drawing.
To obtain a complete unit, please select the red com-
ponents from the pages shown.
Front Switching action Part No.
Wiring
diagram
Weight
Illuminated pushbutton actuator IP 40, square 18.8 x 18.8 mm
Plastic white B 92-340.000 1 0.003 kg
Plastic black B 92-440.000 1 0.003 kg
Switching action: B = Momentary
92
14
Accessories
Front
Lens plate IP 67
Additional Information
• Material plastic
Product attribute Dimension Pressure plate Part No. Weight
Lens plate for pushbutton and indicator IP 67
non-illuminative 12 x 12 mm black opaque 92-941.000 0.001 kg
grey opaque 92-941.800 0.001 kg
illuminative 12 x 12 mm red transparent 92-941.200 0.001 kg
orange transparent 92-941.300 0.001 kg
yellow transparent 92-941.400 0.001 kg
green transparent 92-941.500 0.001 kg
blue transparent 92-941.600 0.001 kg
colourless transparent 92-941.700 0.001 kg
Lens IP 40
Additional Information
• Material plastic
• With white marking plate
Product attribute Dimension Lens Part No. Weight
Lens for pushbutton and indicator IP 40
non-illuminative 13.2 x 13.2 mm black opaque 92-956.000 0.001 kg
grey opaque 92-956.800 0.001 kg
white opaque 92-956.900 0.001 kg
illuminative 13.2 x 13.2 mm red translucent 92-956.200 0.001 kg
orange translucent 92-956.300 0.001 kg
yellow translucent 92-956.400 0.001 kg
green translucent 92-956.500 0.001 kg
blue translucent 92-956.600 0.001 kg
smoked transparent 92-958.100 0.001 kg
red transparent 92-958.200 0.001 kg
orange transparent 92-958.300 0.001 kg
yellow transparent 92-958.400 0.001 kg
green transparent 92-958.500 0.001 kg
blue transparent 92-958.600 0.001 kg
colourless transparent 92-958.700 0.001 kg
92
15
Accessories
NJO
±
NJO
±
Bezel IP 40
Material Colour Part No. Weight
Front bezel for pushbutton and indicator IP 40
Plastic black 92-912.0 0.001 kg
white 92-912.9 0.001 kg
Blind plug
Mounting cut-outs
Dimension Material Colour Part No. Weight
Blind plug
18 x 18 mm Plastic black 51-948.0 0.003 kg
92
16
Accessories
4
5.7
6.35
12.5
16.8
1.6
0.8 x 0.8
16.8
Ø8
1
5.08
10.16
12.5
3.6 4
9.3
5.7
12.5
1
3
2
4
Rear side
Illumination element PCB
Additional Information
• The customer has to decide what series resistor
shall be used to the LED
Dimensions
Terminal Part No.
Compo-
nent layout
Weight
IIlumination element PCB mounting
PCB 92-800.042 1 0.001 kg
The component layouts you will find from page {$l=BR92_KAZE_Zeichnung}
Switching element PCB illuminative
Additional Information
• The customer has to decide what series resistor
shall be used to the LED
Dimensions
Contacts Terminal Part No.
Compo-
nent layout
Wiring
diagram
Weight
Switching element PCB mounting illuminative
1 NO PCB 92-851.342 2 1 0.001 kg
The component layouts you will find from page {$l=BR92_KAZE_Zeichnung}
92
17
Accessories
34
12
Wiring diagram 1
Spacer
Additional Information
• Adjustable for front plate thickness of
2/2.5/3/3.5/4 mm
• When fitting, ensure that back of panel is free of
grease and dirt
Part No. Weight
Spacer
92-965.0 0.003 kg
PCB assembled
Additional Information
• For discrete switching applications including
switching element and mounting flange, soldering
terminal (assembled PCB incl. series resistor and
LED on request)
Part No. Weight
PCB assembled
92-981.0 0.003 kg
92
18
Accessories
Illumination
Single-LED, T1 Bi-Pin
Additional Information
• The customer has to decide what series resistor
shall be used to the LED
• Luminosity and wave length scattering caused by
LED manufacturing processes may cause slight
variations in the illumination
LED colour Forward voltage typ. Lumi. intensity Dom. wavelength Part No. Weight
Single-LED
Single-LED red 2.0 VDC @ 20 mA 160 mcd 625 nm 10-2601.3172S 0.001 kg
Single-LED orange 2.0 VDC @ 20 mA 165 mcd 605 nm 10-2601.3173S 0.001 kg
Single-LED yellow 2.9 VDC @ 20 mA 600 mcd 580 nm 10-2603.3174S 0.001 kg
Single-LED green 3.2 VDC @ 20 mA 650 mcd 525 nm 10-2603.3175S 0.001 kg
Single-LED blue 3.0 VDC @ 20 mA 250 mcd 467 nm 10-2603.3176S 0.001 kg
Single-LED white 3.2 VDC @ 20 mA 500 mcd x=0.3/y=0.3 10-2603.3178S 0.001 kg
92
19
Accessories
20
7.1
4
4.9
R2.2
21.55 ±0.1
Mounting
Anti-twist ring
Additional Information
• For front panel thickness max. 2 mm
Mounting cut-out Part No. Weight
Anti-twist ring
Ø 16 mm 51-910 0.001 kg
Mounting flange
Dimensions
Part No. Weight
Mounting flange
92-960.0 0.001 kg
Lens remover
Additional Information
• For lens IP 40 only
Part No. Weight
Lens remover
18-910 0.002 kg
92
20
Accessories
Mounting tool
Additional Information
• For tightening or loosening of the fixing nut
Part No. Weight
Mounting tool
01-907 0.020 kg
Dismantling tool
Additional Information
• For actuator dismantling of switching element,
illumination element and mounting flange
Part No. Weight
Dismantling tool
92-971.0 0.002 kg
92
21
Drawings
Single-LED
Drilling plan (element side)
A Fixing holes for mounting flange (92-960.0)
B Holes for LED
C Holes for centering pins
15.24
10.16
6.35
6.35
10.16
15.24
Ø1.0
Ø2.0
C
C
A
B
B
A
Single-LED
Drilling plan (element side)
A Fixing holes for mounting flange (92-960.0)
B Holes for LED
C Holes for contact pins
Pad max. Ø 2.5 mm
Through-connection recommended
15.24
12.7
10.16
5.08
15.24
10.16
Ø1.3
Ø1.0
Ø2.0
A
A
B
C
C
C
C
B
Bauteilelayout 1 Bauteilelayout 2
Drawings
92
22
Technical data
Pushbutton and Illuminated pushbutton
Switching system
Short-travel switching system with 2 independent contact points
and tactile operation.
Guarantees reliable switching even of very light loads.
Fitted with 1 normally open contact.
Material
Lens
Polycarbonate (PC)
Front bezel
Thermoplastic Elastomer (TPE)
Frame
Thermoplastic Polyester (PBT)
Material of contact
Gold (Au)
Switching element
Thermoplastic Polyester (PET, PBT) and Polyacetale (POM)
Actuator housing
Thermoplastic Polyester (PBT)
Mechanical characteristics
Tightening torque
Fixing screw 40
Ncm recommended
Fixing nut max. 50
Ncm
Actuating force
2.7
N ±1 N measured at the switching element
5 N measured at the lens
Actuating travel
Switching element 0.4
mm
Rebound time
≤ 1
ms
Resistance to heat of soldering
250 °C, 3 s (PCB assembly)
320 °C, 3 s (when using a soldering iron)
Mechanical lifetime
≥ 1 Million operations as per IEC 60512-5-9a
Electrical characteristics
Contact resistance
Starting value (initial) ≤ 100
mΩ as per IEC 60512-2-2b
Isolation resistance
≥ 109 Ω between all terminals at 100 VDC, as per IEC 60512-2-3a
Electrical life
≥ 500 000 operations at 42 VDC, 50 mA as per IEC 60512-5-9c.
When attention is paid to the direction of current flow from
terminal 3/4 to 1/2 the electrical life can be prolonged.
Electrostatic discharge (ESD)
15 kV
Switch rating
Switching voltage min. 50 mV AC/DC
max. 42 V AC/DC
Switching current min. 10 μA AC/DC
max. 100 mA AC/DC
Power rating max. 2 W
Electric strength
500 VAC, 50 Hz, 1 min, as per IEC 60512-2-4a
Environmental conditions
Storage temperature
-40 °C … +80 °C
Operating temperature
-25 °C … +70 °C
Front protection
Switching element IP 40 (fluxproof to DIN 41640 Part 84)
front IP 67 or IP 40
Shock resistance
(semi-sinusoidal)
max. 500 m/s², pulse width 11 ms, 3-axis,
as per EN IEC 60068-2-27
Vibration resistance
(sinusoidal)
max. 100 m/s² at 10 Hz … 500 Hz, 10 cycles, 3-axis,
as per EN IEC 60068-2-6
Approvals
Declaration of conformity
CE
EAO reserves the right to alter specifications without further
notice.
92
23
Marking
All dimensions in mm
Height of letters h Number of lines
Number of capital letters per line
(target value)
Number of small letters per line
(target value)
3 2 5 – 6 6
4244
5 1 3 3 – 4
6 1 2 – 3 3
8122
h
ABC
abc
Fig. 1 Fig. 2
General notes
If desired, the actuators of the series 92 can be supplied ready
marked. With your order please enclose a list of the desired
markings or a drawing, showing the type or size of script or the
symbols desired.
1. Laser engraving (Fig. 1)
In addition to the most commonly used world languages, in
DIN1451-3 close spacing, other typefaces are available as
Scandinavian, Slavic, Greek, Russian and Polish. Red, blue and
black lenses are filled with white colour. Other colour lenses
arefilled in black. Standard height of letters is 2
mm. If the height
is not specified, we will supply 2
mm engraved letters.
2. Hot stamping (Fig. 1)
For larger series it is worth considering markings by means of hot
stamping. We will pleased to advise you. For letters and figures,
typefaces with 2.5 mm, 3 mm and 4 mm are available.
3. Film inserts (Fig. 2)
Instead of using engraving, the actuator can be fitted with trans-
parent film inserts. However, for this purpose the use of transpa-
rent lens caps is recommended. If smoked lens caps are used the
lettering does not become visible until the LED is alight. Max. size
of film insert 11.4 x 11.4 mm for IP 40 10.4 x 10.4 mm for IP 67
Film thickness 0.2 mm.
92
24
Application guidelines
Suppressor circuits
The free-wheeling diode should be chosen so that the reverse
breakdown voltage is greater than the voltage driving the induc-
tive load. The DC blocking voltage (VR) of the free-wheeling diode
can be found in the datasheet of a diode. The forward current
should be equal or greater than the maximum current flowing
through the load.
To get an efficient protection, the free-wheeling diode must
be connected as close as possible to the inductive load!
When switching inductive loads such as relays, DC motors, and
DC solenoids, it is always important to absorb surges (e.
g. with a
diode) to protect the contacts. When these inductive loads are
switched off, a counter emf can severely damage switch contacts
and greatly shorten lifetime.
Fig. 1 shows an inductive load with a free-wheeling diode con
-
nected in parallel. This free-wheeling diode provides a path for the
inductor current to flow when the current is interrupted by the
switch. Without this free-wheeling diode, the voltage across the
coil will be limited only by dielectric breakdown voltages of the
circuit or parasitic elements of the coil. This voltage can be kilo
-
volts in amplitude even when nominal circuit voltages are low
(e.
g. 12 VDC) see Fig. 2.
Several hundred
to several
thousend volts
ON OFF
0
e = L di
dt
__
V
DC
Switch
Free-wheeling
diode
Inductive
load
Counter EMF
over load without free-wheeling diode
Fig. 2
Switching with inductive load
Fig. 1
+
_
Note for soldering
Process parameter for wave soldering
Basic specification for wave soldering J-STD 75 W4C
Maximum temperature on the component side of the pcb
120 °C
(Temperature must not exceed during the entire processing)
Preheating phase (t1 … t2)
70 … 120 sec
Ramp up
typ. + 1°C/sec
Ramp up to maximum temperature (t2 … t3)
not defined
Maximum temperature on the soldering side (Temp 3)
250 °C
Maximum time of soldering process (t3 … t4)
3 sec
Ramp down at 170 °C:
typ. –2 °C/sec
92
25
Application guidelines
Temperature curve wave soldering
Green curve:
Temperature on the component side of the pcb
Red curve:
Temperature on the soldering side of the pcb
Room temperature:
Temp 1
Preheating:
Temperature process = Temp 1 … Temp 2
Process time = t1 … t2
Ramp up to soldering temperature:
Process time = t2 … t3
Soldering phase:
Temperature process = Temp 3
Process time = t3 … t4
Iron soldering
Basic specification for iron soldering IEC 60068-2-20
Maximum temperature at tip of iron:
320 °C
Maximum soldering time:
3 sec
Cleaning/Lacquering
The switching elements are not sealed. Cleaning up the PCB may
damage the contacts in the switching elements. For this reason,
the following points should be noted:
–
When soldering make sure that the flux does not pass on the
upper side of the PCB.
–
When cleaning the PCB with detergents ensure that no dust
or other debris may get inside of the switching elements.
–
Ensure that no lacquer penetrates into the interior of the
switching element when lacquering the PCB.
Storage of components
To obtain the optimum solderability of the components, the
following points should be noted during storage:
– Do not store components in locations with high temperature
or humidity.
– Do not expose components to corrosive gases.
– Avoid direct sunlight for a long period.
92
26
Application guidelines
60 max.
60 max.
Front plate
PCB
Spacer
Front plate
PCB
Spacer
Arrangement mounting flange
Dismantling mounting flange
The arrangement of the mounting flanges and their number is
determined by the size of the front panel or PCB. To ensure
uniform, tactile switching, we recommend a layout of the flanges
as per adjacent sketch.
The tool Part No. 92-971.0 must be used for removing the moun
-
ting flange from the actuator. Before removing the flange, the PCB
fixing screws must be loosened.
If the number of actuators is insufficient, use the spacer Part. No.
92-965.0 which can be attached to the front panel.
The spacer can be adjusted to the following front panel thicknes
-
ses: 1.5/2/2.2/3/3.5/4 mm and can be stuck to the back of the
panel free of dirt and grease.
For large PCBs with several switching elements we recommend
the following procedure:
1. Fit the actuator to the front panel.
2. Clip the mounting flange to the rear of the intended actuator.
3. Screw the PCB with the components soldered to it to the
assembled mounting flange.
This arrangement applies to PCBs 1.6 mm thick.
92
27
Index
01-907 ..................... 20
10-2601.3172S ........ 18
10-2601.3173S ........ 18
10-2603.3174S ........ 18
10-2603.3175S ........ 18
10-2603.3176S ........ 18
10-2603.3178S ........ 18
18-910 ..................... 19
51-910 ..................... 19
51-948.0 .................. 15
92-043.200 ................ 4
92-043.300 ................ 4
92-043.400 ................ 4
92-043.500 ................ 4
92-043.600 ................ 4
92-043.700 ................ 4
92-058.100 ................ 4
92-058.200 ................ 4
92-058.300 ................ 4
92-058.400 ................ 4
92-058.500 ................ 4
92-058.600 ................ 4
92-058.700 ................ 4
92-140.000 ................ 9
92-143.200 ................ 4
92-143.300 ................ 4
92-143.400 ................ 4
92-143.500 ................ 4
92-143.600 ................ 4
92-143.700 ................ 4
92-158.100 ................ 5
92-158.200 ................ 5
92-158.300 ................ 5
92-158.400 ................ 5
92-158.500 ................ 5
92-158.600 ................ 5
92-158.700 ................ 5
92-340.000 .............. 11
92-340.000 .............. 13
92-341.000 ................ 6
92-341.800 ................ 6
92-343.200 ................ 7
92-343.300 ................ 7
92-343.400 ................ 7
92-343.500 ................ 7
92-343.600 ................ 7
92-343.700 ................ 7
92-350.000 .............. 10
92-350.000 .............. 12
92-356.000 ................ 6
92-356.800 ................ 6
92-356.900 ................ 6
92-358.100 ................ 7
92-358.200 ................ 7
92-358.300 ................ 7
92-358.400 ................ 7
92-358.500 ................ 7
92-358.600 ................ 7
92-358.700 ................ 7
92-440.000 .............. 11
92-440.000 .............. 13
92-441.000 ................ 6
92-441.800 ................ 6
92-443.200 ................ 7
92-443.300 ................ 7
92-443.400 ................ 7
92-443.500 ................ 7
92-443.600 ................ 7
92-443.700 ................ 7
92-450.000 .............. 10
92-450.000 .............. 12
92-456.000 ................ 6
92-456.800 ................ 6
92-456.900 ................ 6
92-458.100 ................ 8
92-458.200 ................ 8
92-458.300 ................ 8
92-458.400 ................ 8
92-458.500 ................ 8
92-458.600 ................ 8
92-458.700 ................ 8
92-800.042 .............. 16
92-851.342 .............. 16
92-912.0 .................. 15
92-912.9 .................. 15
92-941.000 .............. 14
92-941.200 .............. 14
92-941.300 .............. 14
92-941.400 .............. 14
92-941.500 .............. 14
92-941.600 .............. 14
92-941.700 .............. 14
92-941.800 .............. 14
92-956.000 .............. 14
92-956.200 .............. 14
92-956.300 .............. 14
92-956.400 .............. 14
92-956.500 .............. 14
92-956.600 .............. 14
92-956.800 .............. 14
92-956.900 .............. 14
92-958.100 .............. 14
92-958.200 .............. 14
92-958.300 .............. 14
92-958.400 .............. 14
92-958.500 .............. 14
92-958.600 .............. 14
92-958.700 .............. 14
92-960.0 .................. 19
92-965.0 .................. 17
92-971.0 .................. 20
92-981.0 .................. 17
Part No. Page Part No. Page
92
Index from Part No.
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
EAO:
92-456.500 92-989.0 92-953.700 92-456.400 92-951.500 92-951.600 92-948.82 92-456.600 92-456.300 92-
343.900 92-951.900 92-951.300 92-356.300 92-456.200 92-453.200 92-951.200 92-951.400 92-941.900 92-
143.500
