NTCLE203E3
www.vishay.com Vishay BCcomponents
Revision: 16-Sep-11 1Document Number: 29048
For technical questions, contact: nlr@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
NTC Thermistors, Radial Leaded, Accuracy Line
Notes
(1) Response time in silicone oil MS200/50. This is the time needed
for the sensor to reach 63.2 % of the total temperature
difference when subjected to a temperature change from 25 °C
in air to 85 °C in oil.
(2) Valid for all types with the exception of the R25 values 12 k,
22 k and 470 k.
FEATURES
• Accurate over a wide temperature range
(tolerance on B-value down to 0.5 %)
• Good stability over a long life
• Excellent price/performance ratio
• Low heat conductivity through 0.4 mm Ni-leads
• UL recognized, file E148885
• Compliant to RoHS Directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
APPLICATIONS
• Temperature measurement, sensing and control in
industrial, consumer and telecom applications. For
on-board sensing or accurate remote sensing.
DESCRIPTION
These thermistors are made of NTC ceramic material. The
device consists of a chip with two tinned nickel leads. The
parts are coated and color band marked.
PACKAGING
The thermistors are packed in cardboard boxes; the
smallest packing quantity is 500 units.
DESIGN-IN SUPPORT
For complete Curve Computation, visit:
www.vishay.com/resistors-non-linear/curve-computation-list/
MARKING
The thermistors are marked with color bands on a grey
epoxy base coating; see Dimensions and “Electrical Data
and Ordering Information”.
MOUNTING
By soldering in any position.
Notes
(3) Replace * in 12NC by 3 for ± 5 %, 6 for ± 3 %, 4 for ± 2 %, 5 for ± 1 %
(4) Replace * in SAP by J for ± 5 %, H for ± 3 %, G for ± 2 %, F for ± 1 %
QUICK REFERENCE DATA
PARAMETER VALUE UNIT
Resistance value at 25 °C 2K to 470K
Tolerance on R25-value ± 1; ± 2; ± 3; ± 5 %
B25/85-value 3528 to 4570 K
Tolerance on B25/85-value ± 0.5 to ± 2.0 %
Operating temperature range at:
°C
Zero dissipation (continuously) - 40 to + 125
Zero dissipation (for short
periods) (2) 150
Maximum power dissipation 0 to + 55
Maximum power dissipation 100 mW
Dissipation factor 2.2 mW/K
Response time (1) 1.7 s
Thermal time constant 13
Climatic category
(LCT/UCT/days) 40/125/56
Mass 0.11 g
ELECTRICAL DATA AND ORDERING INFORMATION
R25
(k)
B25/85 - VALUE SAP MATERIAL AND
ORDERING NUMBER
NTCLE203E3...... (4)
OLD 12NC CODE
2381 640 5.... (3)
UL APPROVED CODING (see dimensions)
(K) (± %) Y/N I II
2 3528 0.5 202*B0 *202 N Orange Orange
2.7 3977 0.75 272*B0 *272 Y Red Red
4.7 3977 0.75 472*B0 *472 Y Green Green
5 3977 0.75 502*B0 *502 Y Black White
10 3977 0.75 103*B0 *103 Y Blue Blue
12 3740 2 123*B0 *123 Y Yellow Yellow
22 3740 2 223*B0 *223 Y White White
47 4090 1.5 473*B0 *473 N Black Black
68 4190 1.5 683*B0 *683 N Grey Grey
100 4190 1.5 104*B0 *104 N Brown Brown
470 4570 1.5 474*B0 *474 N Violet Violet