Document Number: 42042 For technical questions, contact: aluminumcaps4@vishay.com www.vishay.com
Revision: 14-Mar-11 477
Aluminum Capacitors
Little-Lytic Electrolytics
TE
Vishay Sprague
This datasheet is subject to change without notice.
THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
FEATURES
Proven dependable performance in the industrial
and electronic equipment with either transistor or
modified electron-tube circuits
All terminal connections welded, eliminating possibility of
open” or intermittent contacts occasionally found in
pressure joints of conventional capacitors
Superior in size, performance characteristics, shelf life,
construction and reliability
Metal-encased with clear plastic outer insulating sleeve
Excellent circuit performance when used as coupling
capacitors
Minimum drain and long battery life when used in battery
bypass applications
Better performance under life test than most miniature
aluminum electrolytic capacitors
Axial lead
CAPACITANCE VS. TEMPERATURE
DIMENSIONS AND AVAILABLE FORMS
QUICK REFERENCE DATA
DESCRIPTION VALUE
Operating temperature - 40 °C to + 105 °C
Tolerance on CR
G = + 75 %, - 10 % and
F = + 50 %, - 10 %
Ripple current 10 to 600 max. at 120 Hz,
depending upon capacitance
Life validation test
2000 hours at + 85 °C
After test, capacitance value shall not
have changed by more than ± 20 %, the
equivalent series resistance in ohms
shall not have exceeded 150 % of initial
requirement and the leakage current
shall not have exceeded the initial
requirement
DC leakage current
Maximum DC leakage current at + 25 °C
for all capacitors is 15 µA, except
units in
case code DD, which is 15.8 µA
Shelf test
250 hours at + 85 °C,
with no voltage
applied
The capacitance and equivalent series
resistance shall meet the initial
requirements and the DC leakage
current shall not exceed 300 % of the
initial requirement
Fig.1 Component outlines
800 µF - 3 V
300 µF - 16 V
200 µF - 25 V
100 µF - 50 V
25 µF - 100 V
- 40
Typical
- 20 0 + 20 + 40 + 60 + 80 + 100 + 120
0.9
1.0
1.1
1.2
Capacitance ratio at 120 Hz
Temperature in °C
DIMENSIONS in inches [millimeters]
CASE CODE D L CASE CODE D L
BA 0.260 [6.604] 0.536 [13.614] DC 0.385 [9.779] 0.848 [21.539]
BB 0.260 [6.604] 0.723 [18.364] DD 0.385 [9.779] 0.973 [24.714]
CB 0.322 [8.179] 0.723 [18.364] DF 0.385 [9.779] 1.286 [32.664]
CC 0.322 [8.179] 0.848 [21.539] DH 0.385 [9.779] 1.536 [39.014]
DB 0.385 [9.779] 0.723 [18.364]
L
1.500
[38.10]
min.
D
0.032 [0.811] Dia.
No. 20 AWG Tinned Copper Leads
1.500
[38.10]
min.
TE
Vishay Sprague Aluminum Capacitors
Little-Lytic Electrolytics
www.vishay.com For technical questions, contact: aluminumcaps4@vishay.com Document Number: 42042
478 Revision: 14-Mar-11
This datasheet is subject to change without notice.
THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
ORDERING EXAMPLE
Order by distribution part no. Example: TE1055
Note
For lead (Pb)-free/RoHS compliant products add the suffix “-E3” to the shortened Distribution part. no.
Example TE1055-E3
Note
For lead (Pb)-free/RoHS compliant products add the suffix “E3” to the standard OEM part no.
Example: 30D256G003BA2E3
STANDARD RATINGS
CAPACITANCE
(µF) CASE CODE DISTRIBUTOR DIVISION
PART NUMBER
SPRAGUE O.E.M.
PART NUMBER
0 - 3 WVDC
1.0 - See 0 - 50 WVDC listing -
2.0 - See 0 - 50 WVDC listing -
3.0 - See 0 - 50 WVDC listing -
4.0 - See 0 - 50 WVDC listing -
5.0 - See 0 - 25 WVDC listing -
6.0 - See 0 - 25 WVDC listing -
8.0 - See 0 - 25 WVDC listing -
10.0 - See 0 - 16 WVDC llisting -
15.0 - See 0 - 12 WVDC listing -
20.0 - See 0 - 6 WVDC listing -
25.0 BA TE1055 30D256G003BA2
50.0 - See 0 - 6 WVDC listing -
75.0 - See 0 - 6 WVDC listing -
100.0 CB TE1059.5 30D107G003CB2
200.0 CC TE1064 30D207G003CC2
300.0 DC TE1066 30D307G003DC2
500.0 DF TE1068 30D507G003DF2
0 - 6 WVDC
1.0 - See 0 - 50 WVDC listing -
2.0 - See 0 - 50 WVDC listing -
3.0 - See 0 - 50 WVDC listing -
4.0 - See 0 - 50 WVDC listing -
5.0 - See 0 - 25 WVDC listing -
6.0 - See 0 - 25 WVDC listing -
8.0 - See 0 - 25 WVDC listing -
10.0 - See 0 - 16 WVDC listing -
15.0 - See 0 - 12 WVDC listing -
20.0 BA TE1090 30D206G006BA2
25.0 - See 0 - 16 WVDC listing -
35.0 BB TE1093 30D356G006BB2
50.0 BB TE1100 30D506G006BB2
75.0 CB TE1101.5 30D756G006CB2
100.0 - See 0 - 12 WVDC listing -
200.0 DC TE1104 30D207G006DC2
250.0 DD TE1105 30D257G006DD2
300.0 DD TE1106 30D307G006DD2
400.0 DF TE1107 30D407G006DF2
500.0 DH TE1107.5 30D507G006DH2
600.0 DH TE1108.5 30D607G006DH2
Document Number: 42042 For technical questions, contact: aluminumcaps4@vishay.com www.vishay.com
Revision: 14-Mar-11 479
TE
Aluminum Capacitors
Little-Lytic Electrolytics Vishay Sprague
This datasheet is subject to change without notice.
THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
0 - 12 WVDC
1.0 - See 0 - 50 WVDC listing -
2.0 - See 0 - 50 WVDC listing -
3.0 - See 0 - 50 WVDC listing -
4.0 - See 0 - 50 WVDC listing -
5.0 - See 0 - 25 WVDC listing -
6.0 - See 0 - 25 WVDC listing -
8.0 - See 0 - 25 WVDC listing -
10.0 - See 0 - 16 WVDC listing -
15.0 BA TE1129 30D156G012BA2
20.0 - See 0 - 16 WVDC listing -
25.0 - See 0 - 16 WVDC listing -
50.0 - See 0 - 16 WVDC listing -
60.0 CB TE1133.5 30D606G012CB2
75.0 - See 0 - 16 WVDC listing -
100.0 CC TE1135 30D107G012CC2
150.0 - See 0 - 16 WVDC listing —
200.0 - See 0 - 16 WVDC listing —
250.0 - See 0 - 16 WVDC listing —
290.0 DF TE1139 30D297G012DF2
0 - 16 WVDC
1.0 - See 0 - 50 WVDC listing -
2.0 - See 0 - 50 WVDC listing -
3.0 - See 0 - 50 WVDC listing -
4.0 - See 0 - 50 WVDC listing -
5.0 - See 0 - 25 WVDC listing -
6.0 - See 0 - 25 WVDC listing -
8.0 - See 0 - 25 WVDC listing -
10.0 BA TE1155 30D106G016BA2
15.0 - See 0 - 25 WVDC listing -
20.0 BB TE1157 30D206G016BB2
25.0 BB TE1157.1 30D256G016BB2
30.0 - See 0 - 25 WVDC listing -
35.0 - See 0 - 25 WVDC listing -
50.0 CB TE1160 30D506G016CB2
75.0 CC TE1161 30D756G016CC2
100.0 DC TE1162 30D107G016DC2
150.0 DD TE1163 30D157G016DD2
200.0 DF TE1164 30D207G016DF2
250.0 DF TE1164.5 30D257G016DF2
300.0 DH TE1165.5 30D307G016DH2
350.0 DH TE1166 30D357G016DH2
STANDARD RATINGS
CAPACITANCE
(µF) CASE CODE DISTRIBUTOR DIVISION
PART NUMBER
SPRAGUE O.E.M.
PART NUMBER
TE
Vishay Sprague Aluminum Capacitors
Little-Lytic Electrolytics
www.vishay.com For technical questions, contact: aluminumcaps4@vishay.com Document Number: 42042
480 Revision: 14-Mar-11
This datasheet is subject to change without notice.
THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
0 - 25 WVDC
1.0 - See 0 - 50 WVDC listing -
2.0 - See 0 - 50 WVDC listing -
3.0 - See 0 - 50 WVDC listing -
4.0 - See 0 - 50 WVDC listing -
5.0 BA TE1202 30D505G025BA2
6.0 BA TE1203 30D605G025BA2
8.0 BA TE1203.5 30D805G025BA2
10.0 BB TE1204 30D106G025BB2
15.0 BB TE1205 30D156G025BB2
20.0 CB TE1206 30D206G025CB2
25.0 CB TE1207 30D256G025CB2
30.0 CB TE1207.5 30D306G025CB2
35.0 CB TE1208 30D356G025CB2
50.0 CC TE1209 30D506G025CC2
75.0 DC TE1210 30D756G025DC2
100.0 DD TE1211 30D107G025DD2
150.0 DF TE1212 30D157G025DF2
200.0 DH TE1213 30D207G025DH2
0 - 50 WVDC
1.0 BA TE1300 30D105G050BA2
2.0 BA TE1301 30D205G050BA2
3.0 BA TE1302 30D305G050BA2
4.0 BA TE1302.1 30D405G050BA2
5.0 BB TE1303 30D505G050BB2
6.0 BB TE1303.1 30D605G050BB2
8.0 BB TE1303.3 30D805G050BB2
10.0 CB TE1304 30D106G050CB2
15.0 CB TE1304.2 30D156G050CB2
20.0 CC TE1305 30D206G050CC2
25.0 CC TE1305.5 30D256G050CC2
35.0 DC TE1306 30D356G050DC2
50.0 DD TE1307 30D506G050DD2
75.0 DF TE1308 30D756G050DF2
100.0 DH TE1309 30D107G050DH2
100 WVDC
1.0 BA TE1400 30D105F100BA2
2.0 BB TE1401 30D205F100BB2
3.0 CB TE1402 30D305F100CB2
4.0 CB TE1403 30D405F100CB2
5.0 CC TE1404 30D505F100CC2
10.0 DC TE1407 30D106F100DC2
15.0 DD TE1408 30D156F100DD2
20.0 DF TE1409 30D206F100DF2
25.0 DH TE1410 30D256F100DH2
30.0 DH TE1411 30D306F100DH2
150 WVDC
1.0 BA TE1500 30D105F150BA2
2.0 BB TE1501 30D205F150BB2
3.0 CB TE1502 30D305F150CB2
4.0 CC TE1503 30D405F150CC2
5.0 CC TE1504 30D505F150CC2
8.0 DC TE1506 30D805F150DC2
10.0 DD TE1507 30D106F150DD2
15.0 DF TE1508.1 30D156F150DF2
20.0 DH TE1509 30D206F150DH2
STANDARD RATINGS
CAPACITANCE
(µF) CASE CODE DISTRIBUTOR DIVISION
PART NUMBER
SPRAGUE O.E.M.
PART NUMBER
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 12-Mar-12 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
