Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 1 of 13
Device No. : DSE-0000626 Prepared date: 03-Sep-2008 Prepared by : Jay Chou
Technical Data Sheet
Full Color Chip LED (Chip LED with Right Angle Lens)
22-23A/R6GTB3C-D01/2C
Features
․Package in 8mm tape on 7〞diameter reel.
․Compatible with automatic placement equipment.
․Compatible with infrared and vapor phase reflow
solder process.
․Multi-color type.
․Pb-free.
․The product itself will remain within RoHS
compliant version.
Descriptions
․The 22-23A SMD LED is much smaller
than lead frame type components, thus
enable smaller board size, higher packing
density, reduced storage space and finally
smaller equipment to be obtained.
․Besides, lightweight makes them ideal for
miniature applications. etc.
Applications
․Backlighting in dashboard and switch.
․Telecommunication: indicator and backlighting in
telephone and fax.
․Flat backlight for LCD, switch and symbol.
․General use.
Device Selection Guide
Chip
Type Material Emitted Color
Resin Color
R6 AlGaInP Brilliant Red
GT InGaN/SiC Brilliant Green
B3 InGaN/SiC Blue
Water Clear
EVERLIGHT ELECTRONICS CO.,LTD.
22-23A/R6GTB3C-D01/2C
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 2 of 13
Device No. : DSE-0000626 Prepared date: 03-Sep-2008 Prepared by : Jay Chou
Package Outline Dimensions
Note: The tolerances unless mentioned is ±0.1mm,Unit = mm
EVERLIGHT ELECTRONICS CO.,LTD.
22-23A/R6GTB3C-D01/2C
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 3 of 13
Device No. : DSE-0000626 Prepared date: 03-Sep-2008 Prepared by : Jay Chou
Absolute Maximum Ratings (Ta=25 )℃
Parameter Symbol Rating Unit
Reverse Voltage VR 5 V
Forward Current IF
R6:25
GT:30
B3:30
mA
Peak Forward Current
(Duty 1/10 @1KHz) IFP
R6:60
GT:100
B3:100
mA
Power Dissipation Pd
R6:60
GT:120
B3:120
mW
Electrostatic Discharge(HBM) ESD
R6:2000
GT:1000
B3:1000
V
Operating Temperature Topr -40 ~ +85 ℃
Storage Temperature Tstg -40 ~ +90 ℃
Soldering Temperature Tsol Reflow Soldering : 260 ℃ for 10 sec.
Hand Soldering : 350 ℃ for 3 sec.
EVERLIGHT ELECTRONICS CO.,LTD.
22-23A/R6GTB3C-D01/2C
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 4 of 13
Device No. : DSE-0000626 Prepared date: 03-Sep-2008 Prepared by : Jay Chou
Electro-Optical Characteristics (Ta=25 )℃
Parameter Symbol Min. Typ. Max. Unit Condition
Luminous Intensity
R6
Iv GT
B3
7.20
22.5
4.50
-----
18.0
57.0
11.5
mcd
Viewing Angle 2θ1/2 ----- 130 ----- Deg
Peak Wavelength
R6
λ
p
GT
B3
-----
632
518
468
----- nm
Dominant Wavelength
R6
λd GT
B3
619
520
465
-----
629
540
475
nm
Spectrum Radiation
Bandwidth
R6
△λ GT
B3
-----
20
36
26
----- nm
Forward Voltage
R6
VF GT
B3
1.6
2.5
2.5
-----
2.0
3.2
3.1
V
IF=2mA
Reverse Current
R6
IR GT
B3
----- -----
10
50
50
μA VR=5V
Notes:
1.Tolerance of Luminous Intensity ±11%
2.Tolerance of Dominant Wavelength ±1nm
3.Tolerance of Forward Voltage ±0.1V
EVERLIGHT ELECTRONICS CO.,LTD.
22-23A/R6GTB3C-D01/2C
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 5 of 13
Device No. : DSE-0000626 Prepared date: 03-Sep-2008 Prepared by : Jay Chou
R6
Bin Range Of Luminous Intensity
Bin Min Max Unit Condition
K 7.20 11.5
L 11.5 18.0
mcd IF=2mA
GT
Bin Range Of Luminous Intensity
Bin Min Max Unit Condition
1 22.5 36.0
2 36.0 57.0
mcd IF=2mA
Bin Range Of Dom. Wavelength
Bin Min Max Unit Condition
X 520 525
Y 525 530
Z 530 535
V 535 540
nm IF=2mA
B3
Bin Range Of Luminous Intensity
Bin Min Max Unit Condition
J 4.50 7.20
K 7.20 11.5
mcd IF=2mA
Bin Range Of Dom. Wavelength
Bin Min Max Unit Condition
X 465 470
Y 470 475
nm IF=2mA
Notes:
1.Tolerance of Luminous Intensity ±11%
2.Tolerance of Dominant Wavelength ±1nm
EVERLIGHT ELECTRONICS CO.,LTD.
22-23A/R6GTB3C-D01/2C
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 6 of 13
Device No. : DSE-0000626 Prepared date: 03-Sep-2008 Prepared by : Jay Chou
Typical Electro-Optical Characteristics Curves
R6
Ta=25°C
Forward Voltage V (V)
Relative luminous intensity (%)
-60
Forward Current Derating Curve
Ambient Temperature Ta (°C)
Forward Current F
I (mA)
1
10
-20-40 0 20 60
40 10080
Relative luminous intensity (%)
100
1000
Forward Current
Wavelength λ (nm)
Luminous Intensity vs.
Ambient Temperature
I (mA)
F
Spectrum Distribution Forward Voltage
F
Ta=25°C
Forward Current vs.
10
Relative luminous intensity (%)
1
10
100
1000
Forward Current I (mA)
010110 2
F
Ta=25°C
Luminous Intensity vs.
Forward Current
30°
20°
Ta=25°C
10°0°
Radiation Diagram
40°
60°
50°
90°
80°
0.6
70°
0.20.10.5 0.3 0.4
1.0
0.8
0.9
0.7
Ambient Temperature Ta (°C)
500
25
0
50
75
100
550 600 650 700 1.2
0
10
20
25
30
40
50
2.82.01.6 2.4 3.0
0
10
0
20
30
25
40
50
40
20 60 10085
EVERLIGHT ELECTRONICS CO.,LTD.
22-23A/R6GTB3C-D01/2C
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 7 of 13
Device No. : DSE-0000626 Prepared date: 03-Sep-2008 Prepared by : Jay Chou
Typical Electro-Optical Characteristics Curves
GT
Relative luminous intensity
Ambient Temperature Ta (°C)
-60
Forward Current Derating Curve
Ambient Temperature Ta (°C)
0
Forward Current
10
0
20
30
25
F
I (mA)
40
50
1
10
40
20 60 10085
-20-40 0 20 60
40 10080
100
%)
(
1000
Luminous Intensity vs.
Ambient Temperature
10
Relative luminous intensity
1
10
100
%)
(
1000
Forward Current
10 10
I (mA)
F
Ta=25°C
Luminous Intensity vs
Forward Current
%
400
Relative luminous intensity
0
25
75
50
(
100
550
450 500 600
)
Spectrum Distribution
2.6
Forward Current
0
10
25
20
I (mA)
F
40
30
50
Forward Voltage
4.23.43.0 3.8 4.5
Ta=25°C
Forward Current vs.
Radiation Diagram
0°
0.5 0.3 0.1
0.7
0.8
0.9
1.0
40°
80°
0.60.2 0.4
90°
70°
60°
50°
10° 20°
30°
Ta=25°C
Wavelength λ (nm) Forward Voltage V (V)
F
Ta=25°C
Duty=1/10
f=1KHz
EVERLIGHT ELECTRONICS CO.,LTD.
22-23A/R6GTB3C-D01/2C
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 8 of 13
Device No. : DSE-0000626 Prepared date: 03-Sep-2008 Prepared by : Jay Chou
Typical Electro-Optical Characteristics Curves
B3
25
0
50
75
100 Ta=25°C
Forward Voltage V (V)
Relative luminous intensity (%)
-60
Forward Current Derating Curve
Ambient Temperature Ta (°C)
Forward Current F
I (mA)
1
10
-20-40 0 20 60
40 10080
Relative luminous intensity (%)
100
1000
Forward Current
Wavelength λ (nm)
Luminous Intensity vs.
Ambient Temperature
I (mA)
F
Spectrum Distribution Forward Voltage
F
Ta=25°C
Forward Current vs.
10
Relative luminous intensity (%)
1
10
100
Forward Current I (mA)
10 10
F
Ta=25°C
Luminous Intensity vs.
Forward Current
30°
20°
Ta=25°C
10°0°
Radiation Diagram
40°
60°
50°
90°
80°
0.6
70°
0.20.10.5 0.3 0.4
1.0
0.8
0.9
0.7
Ambient Temperature Ta (°C)
400 550
450 500 600 2.6
0
10
25
20
40
30
50
4.23.43.0 3.8 4.5
1000
Duty=1/10
f=1KHz
12
0
10
0
20
30
25
40
50
40
20 60 10085
EVERLIGHT ELECTRONICS CO.,LTD.
22-23A/R6GTB3C-D01/2C
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 9 of 13
Device No. : DSE-0000626 Prepared date: 03-Sep-2008 Prepared by : Jay Chou
Label Explanation
CAT: Luminous Intensity Rank
HUE: Dom. Wavelength Rank
REF: Forward Voltage Rank
Reel Dimensions
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
RoHS
Pb
CPN :
PN : XXXXXXXXXXXXX
XXXXXXXXXXXXX
QTY : XXX
LOT NO : XXXXXXXXXX
Reference : XXXXXXXX
CAT : XXX
HUE : XXX
REF : XXX
EVERLIGHT
MADE IN TAIWAN
MSL-2
EVERLIGHT ELECTRONICS CO.,LTD.
22-23A/R6GTB3C-D01/2C
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 10 of 13
Device No. : DSE-0000626 Prepared date: 03-Sep-2008 Prepared by : Jay Chou
Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Moisture Resistant Packaging
Label Desiccant Label
Aluminum moisture-proof bag
EVERLIGHT ELECTRONICS CO.,LTD.
22-23A/R6GTB3C-D01/2C
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 11 of 13
Device No. : DSE-0000626 Prepared date: 03-Sep-2008 Prepared by : Jay Chou
Reliability Test Items And Conditions
The reliability of products shall be satisfied with items listed below.
Confidence level：90%
LTPD：10%
No. Items Test Condition
Test
Hours/Cycles
Sample
Size Ac/Re
1 Reflow Soldering
Temp. : 260℃±5℃
Min. 5sec. 6 Min. 22 PCS. 0/1
2 Temperature Cycle
H : +100℃ 15min
∫ 5 min
L : -40℃ 15min
300 Cycles 22 PCS. 0/1
3 Thermal Shock
H : +100℃ 5min
∫ 10 sec
L : -10℃ 5min
300 Cycles 22 PCS. 0/1
4 High Temperature
Storage Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1
5 Low Temperature
Storage Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1
6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1
7 High Temperature /
High Humidity 85℃/ 85%RH 1000 Hrs. 22 PCS. 0/1
EVERLIGHT ELECTRONICS CO.,LTD.
22-23A/R6GTB3C-D01/2C
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 12 of 13
Device No. : DSE-0000626 Prepared date: 03-Sep-2008 Prepared by : Jay Chou
Precautions For Use
1. Over-current-proof
Customer must apply resistors for protection, otherwise slight voltage shift will cause big
current change ( Burn out will happen ).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less.
If unused LEDs remain, it should be stored in moisture proof packages.
2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions.
Baking treatment : 60±5℃ for 24 hours.
3. Soldering Condition
3.1 Pb-free solder temperature profile
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
EVERLIGHT ELECTRONICS CO.,LTD.
22-23A/R6GTB3C-D01/2C
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 13 of 13
Device No. : DSE-0000626 Prepared date: 03-Sep-2008 Prepared by : Jay Chou
4.Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 5 seconds
within once in less than the soldering iron capacity 30W. Leave two seconds and more intervals, and do
soldering of each terminal. Be careful because the damage of the product is often started at the time of the
hand solder.
5.Repairing
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a
double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether
the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD. Tel: 886-2-2267-2000, 2267-9936
Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Fax: 886-2267-6244, 2267-6189, 2267-6306
Tucheng, Taipei 236, Taiwan, R.O.C http://www.everlight.com
