Technical Data Sheet Full Color Chip LED (Chip LED with Right Angle Lens) 22-23A/R6GTB3C-D01/2C Features Package in 8mm tape on 7diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow solder process. Multi-color type. Pb-free. The product itself will remain within RoHS compliant version. Descriptions The 22-23A SMD LED is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. Besides, lightweight makes them ideal for miniature applications. etc. Applications Backlighting in dashboard and switch. Telecommunication: indicator and backlighting in telephone and fax. Flat backlight for LCD, switch and symbol. General use. Device Selection Guide Chip Type Material Emitted Color R6 AlGaInP Brilliant Red GT InGaN/SiC Brilliant Green B3 InGaN/SiC Blue Everlight Electronics Co., Ltd. Device No. : DSE-0000626 http://www.everlight.com Prepared date: 03-Sep-2008 Resin Color Water Clear Rev. 1 Page: 1 of 13 Prepared by : Jay Chou EVERLIGHT ELECTRONICS CO.,LTD. 22-23A/R6GTB3C-D01/2C Package Outline Dimensions Note: The tolerances unless mentioned is 0.1mm,Unit = mm Everlight Electronics Co., Ltd. Device No. : DSE-0000626 http://www.everlight.com Prepared date: 03-Sep-2008 Rev. 1 Page: 2 of 13 Prepared by : Jay Chou EVERLIGHT ELECTRONICS CO.,LTD. 22-23A/R6GTB3C-D01/2C Absolute Maximum Ratings (Ta=25) Parameter Symbol Rating Unit Reverse Voltage VR 5 V R6:25 Forward Current IF GT:30 mA B3:30 Peak Forward Current (Duty 1/10 @1KHz) R6:60 IFP GT:100 mA B3:100 R6:60 Power Dissipation Pd GT:120 mW B3:120 R6:2000 Electrostatic Discharge(HBM) ESD GT:1000 V B3:1000 Operating Temperature Topr -40 ~ +85 Storage Temperature Tstg -40 ~ +90 Soldering Temperature Tsol Everlight Electronics Co., Ltd. Device No. : DSE-0000626 Reflow Soldering : 260 for 10 sec. Hand Soldering : 350 for 3 sec. http://www.everlight.com Prepared date: 03-Sep-2008 Rev. 1 Page: 3 of 13 Prepared by : Jay Chou EVERLIGHT ELECTRONICS CO.,LTD. 22-23A/R6GTB3C-D01/2C Electro-Optical Characteristics (Ta=25) Parameter Luminous Intensity Viewing Angle Symbol Iv Min. R6 7.20 GT 22.5 B3 4.50 21/2 ----- p GT ----- Spectrum Radiation Bandwidth R6 619 GT 520 B3 465 GT ----- VF 18.0 ----- IR R6 1.6 GT 2.5 B3 2.5 GT mcd 11.5 130 518 ----- Deg ----- nm IF=2mA 629 ----- 540 nm 475 36 ----- nm 2.0 ----- 3.2 V 3.1 10 R6 Reverse Current 57.0 26 B3 Forward Voltage Condition 20 R6 Unit 468 B3 Dominant Wavelength d Max. 632 R6 Peak Wavelength Typ. ----- ----- 50 A VR=5V 50 B3 Notes: 1.Tolerance of Luminous Intensity 11% 2.Tolerance of Dominant Wavelength 1nm 3.Tolerance of Forward Voltage 0.1V Everlight Electronics Co., Ltd. Device No. : DSE-0000626 http://www.everlight.com Prepared date: 03-Sep-2008 Rev. 1 Page: 4 of 13 Prepared by : Jay Chou EVERLIGHT ELECTRONICS CO.,LTD. 22-23A/R6GTB3C-D01/2C R6 Bin Range Of Luminous Intensity Bin Min Max K 7.20 11.5 L 11.5 18.0 Unit Condition mcd IF=2mA Unit Condition mcd IF=2mA Unit Condition nm IF=2mA Unit Condition mcd IF=2mA Unit Condition nm IF=2mA GT Bin Range Of Luminous Intensity Bin Min Max 1 22.5 36.0 2 36.0 57.0 Bin Range Of Dom. Wavelength Bin Min Max X 520 525 Y 525 530 Z 530 535 V 535 540 B3 Bin Range Of Luminous Intensity Bin Min Max J 4.50 7.20 K 7.20 11.5 Bin Range Of Dom. Wavelength Bin Min Max X 465 470 Y 470 475 Notes: 1.Tolerance of Luminous Intensity 11% 2.Tolerance of Dominant Wavelength 1nm Everlight Electronics Co., Ltd. Device No. : DSE-0000626 http://www.everlight.com Prepared date: 03-Sep-2008 Rev. 1 Page: 5 of 13 Prepared by : Jay Chou EVERLIGHT ELECTRONICS CO.,LTD. 22-23A/R6GTB3C-D01/2C Typical Electro-Optical Characteristics Curves R6 Forward Current vs. Forward Voltage Ta=25C Forward Current IF (mA) 100 75 50 25 0 500 1000 550 600 650 Wavelength (nm) 40 30 25 20 10 1.6 2.0 2.4 2.8 3.0 Forward Voltage VF (V) Luminous Intensity vs. Luminous Intensity vs. Ambient Temperature Forward Current 100 10 1 -60 -40 -20 0 20 40 60 80 100 Ta=25C 1000 100 10 1 0 10 10 1 10 2 Forward Current IF (mA) Ambient Temperature Ta (C) Radiation Diagram 0 10 Forward Current Derating Curve Forward Current IF (mA) Ta=25C 50 0 1.2 700 Relative luminous intensity (%) Relative luminous intensity (%) Relative luminous intensity (%) Spectrum Distribution 50 Ta=25C 20 30 40 30 25 20 10 0 40 1.0 0.9 50 0.8 60 70 0.7 20 0 40 60 85 100 Ambient Temperature Ta (C) Everlight Electronics Co., Ltd. Device No. : DSE-0000626 http://www.everlight.com Prepared date: 03-Sep-2008 80 90 0.5 0.3 0.1 Rev. 1 0.2 0.4 0.6 Page: 6 of 13 Prepared by : Jay Chou EVERLIGHT ELECTRONICS CO.,LTD. 22-23A/R6GTB3C-D01/2C Typical Electro-Optical Characteristics Curves GT I (mA) 40 F 75 50 25 0 400 450 500 550 30 25 20 10 0 2.6 600 Luminous Intensity vs. Relative luminous intensity (%) Ambient Temperature 1000 100 10 1 -60 -40 -20 3.0 3.4 0 20 40 60 80 100 1000 4.5 f=1KHz Duty=1/10 100 10 1 10 10 10 Forward Current IF(mA) Radiation Diagram Forward Current Derating Curve Ta=25C 10 0 50 IF(mA) 4.2 Luminous Intensity vs Forward Current Ta=25C Ambient Temperature Ta (C) Forward Current 3.8 Forward Voltage VF (V) Wavelength (nm) Relative luminous intensity (%) Forward Current vs. Forward Voltage Ta=25C 50 100 Forward Current Relative luminous intensity (%) Spectrum Distribution Ta=25C 20 30 40 40 30 25 1.0 20 0.9 50 0.8 60 10 70 0.7 0 20 0 40 60 85 100 Ambient Temperature Ta (C) Everlight Electronics Co., Ltd. Device No. : DSE-0000626 http://www.everlight.com Prepared date: 03-Sep-2008 80 90 0.5 0.3 0.1 0.2 Rev. 1 0.4 0.6 Page: 7 of 13 Prepared by : Jay Chou EVERLIGHT ELECTRONICS CO.,LTD. 22-23A/R6GTB3C-D01/2C Typical Electro-Optical Characteristics Curves B3 Forward Current vs. Forward Voltage Ta=25C 100 Forward Current IF (mA) Relative luminous intensity (%) Spectrum Distribution 75 50 25 0 450 400 500 550 40 30 25 20 10 0 2.6 600 Wavelength (nm) Relative luminous intensity (%) Relative luminous intensity (%) 3.8 4.2 Forward Current 100 10 0 20 40 60 80 100 1000 4.5 Ta=25C f=1KHz Duty=1/10 100 10 1 10 2 1 10 10 Forward Current IF (mA) Ambient Temperature Ta (C) Radiation Diagram 0 10 Forward Current Derating Curve Forward Current IF (mA) 3.4 Luminous Intensity vs. Ambient Temperature 1 -60 -40 -20 3.0 Forward Voltage VF (V) Luminous Intensity vs. 1000 Ta=25C 50 50 Ta=25C 20 30 40 30 25 20 10 0 40 1.0 0.9 50 0.8 60 70 0.7 0 20 40 60 85 100 Ambient Temperature Ta (C) Everlight Electronics Co., Ltd. Device No. : DSE-0000626 http://www.everlight.com Prepared date: 03-Sep-2008 80 90 0.5 0.3 0.1 Rev. 1 0.2 0.4 0.6 Page: 8 of 13 Prepared by : Jay Chou EVERLIGHT ELECTRONICS CO.,LTD. 22-23A/R6GTB3C-D01/2C Label Explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank Pb REF: Forward Voltage Rank CPN : P N : XXXXXXXXXXXXX EVERLIGHT RoHS XXXXXXXXXXXXX CAT : XXX HUE : XXX REF : XXX QTY : XXX LOT NO : XXXXXXXXXX MSL-2 Reference : XXXXXXXX MADE IN TAIWAN Reel Dimensions Note: The tolerances unless mentioned is 0.1mm ,Unit = mm Everlight Electronics Co., Ltd. Device No. : DSE-0000626 http://www.everlight.com Prepared date: 03-Sep-2008 Rev. 1 Page: 9 of 13 Prepared by : Jay Chou EVERLIGHT ELECTRONICS CO.,LTD. 22-23A/R6GTB3C-D01/2C Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel Note: The tolerances unless mentioned is 0.1mm ,Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Everlight Electronics Co., Ltd. Device No. : DSE-0000626 Desiccant http://www.everlight.com Prepared date: 03-Sep-2008 Label Rev. 1 Page: 10 of 13 Prepared by : Jay Chou EVERLIGHT ELECTRONICS CO.,LTD. 22-23A/R6GTB3C-D01/2C Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level90% LTPD10% Test Sample Hours/Cycles Size No. Items Test Condition 1 Reflow Soldering Temp. : 2605 Min. 5sec. 6 Min. 22 PCS. 0/1 Temperature Cycle H : +100 15min 5 min L : -40 15min 300 Cycles 22 PCS. 0/1 Thermal Shock H : +100 5min 10 sec L : -10 5min 300 Cycles 22 PCS. 0/1 Temp. : 100 1000 Hrs. 22 PCS. 0/1 Temp. : -40 1000 Hrs. 22 PCS. 0/1 2 3 4 5 High Temperature Storage Low Temperature Storage Ac/Re 6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85/ 85%RH 1000 Hrs. 22 PCS. 0/1 Everlight Electronics Co., Ltd. Device No. : DSE-0000626 http://www.everlight.com Prepared date: 03-Sep-2008 Rev. 1 Page: 11 of 13 Prepared by : Jay Chou EVERLIGHT ELECTRONICS CO.,LTD. 22-23A/R6GTB3C-D01/2C Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30 or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30 or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 605 for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. Everlight Electronics Co., Ltd. Device No. : DSE-0000626 http://www.everlight.com Prepared date: 03-Sep-2008 Rev. 1 Page: 12 of 13 Prepared by : Jay Chou EVERLIGHT ELECTRONICS CO.,LTD. 22-23A/R6GTB3C-D01/2C 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350 for 5 seconds within once in less than the soldering iron capacity 30W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Everlight Electronics Co., Ltd. Device No. : DSE-0000626 Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com http://www.everlight.com Prepared date: 03-Sep-2008 Rev. 1 Page: 13 of 13 Prepared by : Jay Chou