Wire and Harnessing Products
Tyco Electronics Corporation
300 Constitution Drive
Menlo Park, CA 94025 USA
Title: Hi-Ratio Cable Breakout Boot, Three Entry
Specification Control Drawing Size
A Cage Code
06090
Document No.
TXXX-XXXFR-High-Ratio
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN INCHES.
METRIC DIMENSIONS ARE SHOW N I N
BRACKETS
Tyco Electronics reserves the right to amend this
drawing at any time. Users should evaluate the
suitability of the product for their application. Rev.:
A
Rev. Date:
March 12, 2003
Drawn By:
A. Ng Org. Date:
03/12/03 Original file:
N/A File :
r030125.doc Scale:
None Sheet: 1 of 1
If this document is printed it becomes uncontrolled. Check for the latest revision.
Hi-Ratio Cable Breakout Boots, Three Entry
Table of Dimensions, inch (mm):
PART
NUMBER
(See Note*)
Body ID
Exp. Rec’d.
(A), Min (B), Max
Leg ID
Exp. Rec’d.
(C), Min (D), Max
Length Recovered
Min
(E), Body (F), Leg
Rec’d. Wall
Thickness
Ref
(W)
T14-50FR 1.50 (38) 0.50 (13) 0.65 (16) 0.16 (4) 1.8 (46) 2.2 (56) 0.09 (2.3)
T3-100FR 1.70 (43) 0.36 (9) 0.82 (21) 0.12 (3) 2.3 (58) 2.2 (56) 0.12 (3.0)
T150-400FR 3.20 (81) 1.40 (36) 1.40 (36) 0.50 (13) 3.5 (89) 1.6 (41) 0.12 (3.0)
Note*: Add “NA” to the end of Part Number if no adhesive is required
Material: -152, heat shrinkable, crosslinked flexible polyolefin per Mil-I-81765/1A Type II
Factory applied sealant: Factory applied hot melt adhesive is standard.
