SIL06C-12SADJ-VJ - EMERSON�NETWORK POWER

POWER

Total Power: 30 Watts

Input Voltage: 4.5 - 13.8 Vdc

# of Outputs: Single

Electrical Specications

Input

Input voltage ra nge 5 V input model

12 V input model

4.5 - 5.5 Vdc

10.2 - 13.8 Vdc

Input current No load

Remote OFF

50 mA

5 mA

Input current (max.)

(See Note 9)

5 V input model

12 V input model

5.1 A @ lo max.

1.6 A @ Io max.

Input reected ripple

(See Note 2)

5 V input model

12 V input model

52 mA (pk-pk)

56 mA (pk-pk)

Remote ON/OFF

Logic compatibility

OFF

Active high

>2.4 Vdc

<0.8 Vdc

Start-up time Power up

Remote ON/OFF

<20 ms

Turn ON threshold 5 Vin

12 Vin

4.5 Vdc

9.0 Vdc

Turn OFF threshold 5 Vin

12 Vin

4.3 Vdc

7.5 Vdc

Output

Voltage adjustability

(See Note 7)

5 V input model

12 V input model

0.9 - 3.3 Vdc

0.9 - 5.0 Vdc

Output setpoint accuracy with 1.0% trim resistors ±2.5%

Line regulation Low line to high line ±0.2%

Load regulation Full load to min. load ±0.5%

Min/Max load 0 A/6 A

Overshoot

(at turn on)

5 V input model

12 V input model

3.0% max.

1.0% max.

Undershoot 100 mV max.

Ripple and noise 5 Hz to 20 MHz (See Note 2) See table

Transient response

(See Note 1)

Deviation 75 mV; 150 μs recovery to within

regulation band

All specications are typical at nominal input, full load at 25°C unless otherwise stated.

Data Sheet

SPECIAL FEATURES

6 A current rating

Input voltage range: 4.5 - 5.5 Vdc

or 10.2 - 13.8 Vdc

Output voltage: 0.9 - 5.0 V

Industry-leading value

Cost optimized design

Excellent transient response

Output voltage adjustability

Path for future upgrades

Supports silicon voltage migration

Reduced design-in and qual time

Designed-in reliability: MTBF of 7

million hours per Telcordia SR-332

Available RoHS compliant

Two year warranty

SAFETY

UL, cUL CAN/CSA 22.2 No.

E139421

UL6950 File No. E139421

TÜV Product Service (EN60950)

Certicate No. B 04 08 19870 228

CB report and certicate to

IEC60950

SIL06C Series

C-Class Non-Isolated

SIL06C Data Sheet

Ordering Information

Model

Number (3,5)

Output Power

(Max.)

Input

Voltage

Output

Voltage

Output Current

(Min.)

Output Current

(Max.)

Efficiency

(Typical)

Regulation

Line Load

SIL06C-05SADJ-VJ 20 W 4.5 - 5.5 Vdc 0.9 - 3.3 V 0 A 6 A 89% ±0.2% ±0.5%

SIL06C-12SADJ-VJ 30 W 10.2 - 13.8 Vdc 0.9 - 5.0 V 0 A 6 A 91% ±0.2% ±0.5%

Notes:

1. di/dt = 10 A/μs, Vin = Nom, Tc = 25 °C, load change = 0.5 lo max. to 0.75 lo max. and 0.75 lo max

to 0.5 lo max.

2. Measured with external filter. See Application Note 131 for details.

3. Power up is the time from application of dc input to Power Good enabled. Remote ON/OFF is from

ON/OFF asserted high to Power Good enabled.

4. This product is only for inclusion by professional installers within other equipment and must not be

operated as a stand-alone product.

5. The standard unit with the suffix ‘-V’ is for vertical mounting. To order a unit with horizontal

mounting, please add the suffix ‘-H’ to the model number, e.g. SIL06C-05SADJ-HJ.6. Airflow

dependent, 300 LFM minimum required.

6. Measured as per recommended set-up. Cin = 270 μF (20 mW ESR max.). Cout = 680 μF (10 mW

ESR max.).

7. Uses external resistor from trim to output ground. Minimum value 485 Ω for 5 V model, 280 Ω for

12 V model. See Applications Note 131 for details.

8. Signal line assumed <3 m.

9. External input fusing recommended.

10. See Application Note 131 for operation above 50 ºC.

11. See Application Note 131 for more details.

12. These models have a wide trim output. 5 Vin has an output of 0.9 Vdc to 3.3 Vdc and 12 Vin has an

output of 0.9 Vdc to 5 Vdc. An external resistor adjusts the output voltage.

13. To order a unit with a pin length of 0.150”, please add suffix ‘P4’ to the model number, e.g.

SIL06C-05SADJ-HP4J.

14. NOTICE: Some models do not support all options. Please contact your local Artesyn representative

or use the on-line model number search tool at http://www.artesyn.com/power to find a suitable

alternative.

Part Number System with Options

SIL 06 C - 12 SADJ - V J

Product Family

SIL = Single In Line

Number of

Outputs

Single Adjustable

Output

Performance

C = Cost Optimized

Input Voltage

05 = 4.5 - 5.5

12 = 10.2 - 13.8

Mounting

Option

V = Vertical

H = Horizontal

Rated Output

Current

06 = 06 Amps

Packaging

Options

J = Pb free (RoHS

6/6 compliant)

Output Voltage Adjustment

The ultra-wide output voltage trim range offers major advantages to users

who select the SIL06C series. It is no longer necessary to purchase a variety

of modules in order to cover different output voltages. The output voltage can

be trimmed in a range of 0.9 Vdc to 5.0 Vdc. When the SIL06C series

converterleaves the factory the output has been adjusted to the default

voltage of 0.9 V.

General Specications

Efciency See Table

Switching frequency Fixed 200 kHz typical

Approvals and

standards

(See Note 4) TÜV Product Services

EN60950, UL/cUL60950

Material ammability UL94V-0

Weight 9.3 g (0.3 oz)

MTBF Telcordia SR-332 7,562,142 hours

Environmental Specications

Thermal performance Operating ambient temperature -0 °C to +80 °C

(See Note 8) Non-operating temperature -40 °C to +125 °C

Protection

Short-circuit Hiccup, non latching

Recommended System Capacitance

Input capacitance (See Note 11) 270 μF / 20 mW

ESR max.

Output capacitance (See Note 11) 680 μF / 10 mW

ESR max.

Ripple and Noise Specication

Model Output Voltage Pk - Pk RMS

5 V input models 0.9 - 2.5 Vdc

3.3 Vdc

30 mV

40 mV

15 mV

12 V input models 0.9 - 2.5 Vdc

3.3 Vdc

40 mV

50 mV

20 mV

SIL06C Data Sheet

WORLDWIDE OFFICES

Americas

2900 S.Diablo Way

Tempe, AZ 85282

USA

+1 888 412 7832

Europe (UK)

Waterfront Business Park

Merry Hill, Dudley

West Midlands, DY5 1LX

United Kingdom

+44 (0) 1384 842 211

Asia (HK)

14/F, Lu Plaza

2 Wing Yip Street

Kwun Tong, Kowloon

Hong Kong

+852 2176 3333

For more information: www.artesyn.com/power

For support: productsupport.ep@artesyn.com

www.artesyn.com

While every precaution has been taken to ensure accuracy and completeness in this literature, Artesyn

Embedded Technologies assumes no responsibility, and disclaims all liability for damages resulting from use

of this information or for any errors or omissions. Artesyn Embedded Technologies, Artesyn and the Artesyn

Embedded Technologies logo are trademarks and service marks of Artesyn Embedded Technologies, Inc.

All other names and logos referred to are trade names, trademarks, or registered trademarks of their respective

Mating Connectors

Mechanical Drawings

All dimensions in inches (mm)

General tolerance ±0.01in ( ±0.25mm)

except where specied otherwise

Pin 1

0.050

(1.27)

1.200

(30.48)

0.040

(1.02) Ref.

0.610

(15.49)

Pin 8

0.100

(2.54)

0.950

(24.13)

0.150

(3.81)

0.025 ±0.001

(0.64) Typ. ±0.025

0.070

(1.78)

0.315

(8.00) max.

0.150

(3.81)

8 Places

0.062

(1.57) Ref.

0.050

(1.27) Typ.

0.025 ±0.001

(0.64) Typ. ±0.025

All dimensions in INCHES (mm)

General tolerance ±0.01in ( ±0.25mm)

except where specied otherwise

0.315

(8.00) max

0.150

(3.81) Ref

0.120

(3.05)

9 Places

0.062

(1.57) PCB Ref

Pin 8

0.025 ±0.001

(0.64) Typ. ±0.025

0.950

(24.13)

0.100

(2.54)

0.150

(3.80)

0.015

(0.38)

Pin 1

1.200

(30.48)

0.610

(15.49)

0.040

(1.02)

0.050

(1.27)

0.530

(15.01)

0.527

(13.38)

0.025 ±0.001

(0.64) Typ. ±0.025

Mechanical

Support Pin

Pin Assignments

Pin Function

1 Vout

2 Trim

3 Ground

4 Power Good

5 Remote ON/OFF

6 Vin

7 Mechanical support

8 Mechanical support

9 Mechanical support (Horiz only)

Horizontal Mount

Vertical Mount