SPEC NO: DSAG3290 REV NO: V.7 DATE: SEP/23/2010 PAGE: 1 OF 5
APPROVED: WYNEC CHECKED: Joe Lee DR AWN: Y.H.Wu ERP: 1361000052
SURFACE MOUNT DISPLAY
Part Number: KCPSA04-123 Green
Features
z0.4 inch character height.
zLow current operation.
zHigh contrast and light output.
zCategorized for luminous intensity.
zMechanically rugged.
zGray face,white segment.
zPackage : 400pcs / reel.
zMoisture sensitivity level : level 2a.
zRoHS compliant.
Description
The Green source color devices are made with AlGaInP on
GaAs substrate Light Emitting Diode.
Package Dimensions& Intern al Circuit Diagram
Notes:
1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted.
2. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
3. The gap between the reflector and PCB shall not exceed 0.25mm.
CGK
SPEC NO: DSAG3290 REV NO: V.7 DATE: SEP/23/2010 PAGE: 2 OF 5
APPROVED: WYNEC CHECKED: Joe Lee DR AWN: Y.H.Wu ERP: 1361000052
Selection Guide
Note:
1. Luminous intensity/ luminous Flux: +/-15%.
Absolute Maximum Ratings at TA=25° C
Electrical / Optical Characteristics at TA=25°C
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Part No. Dice Lens Type Iv (ucd) [1]
@ 10mA
Min. Typ.
KCPSA04-123 Green (AlGaInP) White Diffused 5600 11000 Common Anode, Rt.
Hand Decimal.
Description
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak Peak Wavelength Green 574 nm IF=20mA
λD [1] Dominant Wavelength Green 570 nm IF=20mA
Δλ1/2 Spectral Line Half-width Green 20 nm IF=20mA
C Capacitance Green 15 pF VF=0V;f=1MHz
VF [2] Forward Voltage Green 2.1 2.5 V IF=20mA
IR Reverse Current Green 10 uA VR=5V
Parameter Green Units
Power dissipation 75 mW
DC Forward Current 30 mA
Peak Forward Current [1] 150 mA
Reverse Voltage 5 V
Operating / Storage Temperature -40°C To +85°C
SPEC NO: DSAG3290 REV NO: V.7 DATE: SEP/23/2010 PAGE: 3 OF 5
APPROVED: WYNEC CHECKED: Joe Lee DR AWN: Y.H.Wu ERP: 1361000052
Green KCPSA04-123
SPEC NO: DSAG3290 REV NO: V.7 DATE: SEP/23/2010 PAGE: 4 OF 5
APPROVED: WYNEC CHECKED: Joe Lee DR AWN: Y.H.Wu ERP: 1361000052
KCPSA04-123
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.15) Reel Dimension
Tape Specifications
(Units : mm)
SPEC NO: DSAG3290 REV NO: V.7 DATE: SEP/23/2010 PAGE: 5 OF 5
APPROVED: WYNEC CHECKED: Joe Lee DR AWN: Y.H.Wu ERP: 1361000052
PACKING & LABEL SPECIFICATIONS KCPSA04-123