MAX4372T/F/H LE AVAILAB Low-Cost, UCSP/SOT23, Micropower, High-Side Current-Sense Amplifier with Voltage Output General Description The MAX4372 low-cost, precision, high-side currentsense amplifier is available in a tiny, space-saving SOT23-5-pin package. Offered in three gain versions (T = 20V/V, F = 50V/V, and H = 100V/V), this device operates from a single 2.7V to 28V supply and consumes only 30A. It features a voltage output that eliminates the need for gain-setting resistors and is ideal for today's notebook computers, cell phones, and other systems where battery/DC current monitoring is critical. High-side current monitoring is especially useful in battery-powered systems since it does not interfere with the ground path of the battery charger. The input common-mode range of 0 to 28V is independent of the supply voltage and ensures that the current-sense feedback remains viable even when connected to a 2-cell battery pack in deep discharge. The user can set the full-scale current reading by choosing the device (T, F, or H) with the desired voltage gain and selecting the appropriate external sense resistor. This capability offers a high level of integration and flexibility, resulting in a simple and compact current-sense solution. For higher bandwidth applications, refer to the MAX4173T/F/H data sheet. Applications Power-Management Systems General-System/Board-Level Current Monitoring Notebook Computers Functional Diagrams Portable/Battery-Powered Systems Smart-Battery Packs/Chargers Cell Phones Features o Low-Cost, Compact Current-Sense Solution o 30A Supply Current o 2.7V to 28V Operating Supply o 0.18% Full-Scale Accuracy o 0.3mV Input Offset Voltage o Low 1.5 Output Impedance o Three Gain Versions Available 20V/V (MAX4372T) 50V/V (MAX4372F) 100V/V (MAX4372H) o High Accuracy +2V to +28V Common-Mode Range, Functional Down to 0V, Independent of Supply Voltage o Available in a Space-Saving 5-Pin SOT23 Package and 3 x 2 UCSPTM (1mm x 1.5mm) Package Ordering Information PART TEMP RANGE PIN-PACKAGE MAX4372TEUK-T MAX4372TEUK+T MAX4372TESA+T MAX4372TEBT-T MAX4372TEBT+T -40C to +85C -40C to +85C -40C to +85C 5 SOT23-5 8 SO 3 x 2 UCSP Typical Operating Circuit Pin Configurations OUT VCC 1 2 3 ILOAD TOP VIEW (BUMPS ON BOTTOM) + GND 5 GND 1 2 3 A VCC GND OUT A/D CONVERTER B RS+ RS- VCC +2.7V TO +28V RS- MAX4372T/F/H ADIU -- ACX +Denotes a lead(Pb)-free/RoHS-compliant package. T = Tape and reel. Note: Gain values are as follows: 20V/V for the T version, 50V/V for the F version, and 100V/V for the H version. Ordering Information continued at end of datasheet. Precision-Current Sources TOP VIEW TOP MARK RS- MAX4372T/F/H RSENSE OUT VSENSE LOAD/ BATTERY MAX4372T/F/H 4 RS+ UCSP Pin Configurations appear at end of data sheet. SOT23-5 Functional Diagrams continued at end of data sheet. Pin Configurations continued at end of datasheet. UCSP is a trademark of Maxim Integrated Products, Inc. VCC RS+ 0.1F VIN 0 TO 28V UCSP is a trademark of Maxim Integrated Products, Inc. For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642, or visit Maxim's website at www.maximintegrated.com. 19-1548; Rev 5; 5/11 MAX4372T/F/H Low-Cost, UCSP/SOT23, Micropower, High-Side Current-Sense Amplifier with Voltage Output ABSOLUTE MAXIMUM RATINGS VCC, RS+, RS- to GND ...........................................-0.3V to +30V OUT to GND ...........................................................-0.3V to +15V Differential Input Voltage (VRS+ - VRS-) ..............................0.3V Current into Any Pin..........................................................10mA Continuous Power Dissipation (TA = +70C) 5-Pin SOT23 (derate 3.9mW/C above +70C)..........312.6mW 8-Pin SO (derate 7.4mW/C above +70C)................588.2mW 3 x 2 UCSP (derate 3.4mW/C above +70C) ...........273.2mW Operating Temperature Range ...........................-40C to +85C Storage Temperature Range .............................-65C to +150C Lead Temperature (soldering, 10s). ................................+300C Soldering Temperature (reflow). ......................................+300C Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. ELECTRICAL CHARACTERISTICS (VRS+ = 0 to 28V, VCC = 2.7V to 28V, VSENSE = 0V, RLOAD = 1M, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25C.) (Note 1) PARAMETER Operating Voltage Range (Note 2) SYMBOL CONDITIONS MIN TYP UNITS VCC 2.7 28 V Common-Mode Input Range (Note 3) VCMR 0 28 V Common-Mode Rejection CMR Supply Current Leakage Current ICC IRS+, IRSIRS+ Input Bias Current IRSFull-Scale Sense Voltage (Note 4) Input Offset Voltage (Note 5) Full-Scale Accuracy (Note 5) VSENSE VOS VRS+ > 2V 85 VRS+ > 2V, VSENSE = 5mV 30 60 A 0.05 1.2 A VCC = 0V, VRS+ = 28V Total OUT Voltage Error (Note 6) dB VRS+ > 2V 0 1 VRS+ 2V -25 2 VRS+ > 2V 0 2 VRS+ 2V -50 150 Gain = 100V/V 100 mV TA = +25C VCC = VRS+ = 12V MAX4372_ESA 0.3 0.8 MAX4372_EUK, _EBT 0.3 1.3 TA = TMIN to TMAX VCC = VRS+ = 12V MAX4372_ESA 1.1 MAX4372_EUK, _EBT 1.9 VSENSE = 100mV, VCC = 12V, VRS+ = 12V, TA = +25C (Note 7) A 2 Gain = 20V/V or 50V/V 0.18 VSENSE = 100mV, VCC = 12V, VRS+ = 12V (Note 7) 2 MAX 3 mV % 6 VSENSE = 100mV, VCC = 28V, VRS+ = 28V (Note 7) 0.15 7 VSENSE = 100mV, VCC = 12V, VRS+ = 0.1V (Note 7) 1 28 VSENSE = 6.25mV, VCC = 12V, VRS+ = 12V (Note 8) 0.15 % Maxim Integrated MAX4372T/F/H Low-Cost, UCSP/SOT23, Micropower, High-Side Current-Sense Amplifier with Voltage Output ELECTRICAL CHARACTERISTICS (continued) (VRS+ = 0 to 28V, VCC = 2.7V to 28V, VSENSE = 0V, RLOAD = 1M, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25C.) (Note 1) PARAMETER SYMBOL OUT Low Voltage (MAX4372T, MAX4372F) VOL OUT Low Voltage (MAX4372H) VOL OUT High Voltage VCC - VOH -3dB Bandwidth BW CONDITIONS VCC = 2.7V, VSENSE = -10mV VRS+ = 28V VCC = 2.7V, VSENSE = -10mV VRS+ = 12V MIN 2.6 IOUT = 100A 9 IOUT = 10A 2.6 IOUT = 100A 9 65 0.1 0.25 VSENSE = 20mV, gain = 20V/V 275 VSENSE = 20mV, gain = 50V/V 200 VSENSE = 20mV, gain = 100V/V 110 VSENSE = 6.25mV 50 MAX4372T Gain 65 UNITS mV mV V kHz 20 MAX4372F 50 MAX4372H 100 Gain Accuracy TA = +25C VSENSE = 20mV to 100mV,VRS+ =12V TA = -40C to +85C OUT Settling Time to 1% of Final Value Gain = 20V/V, VCC = 12V, VRS+ = 12V, CLOAD = 10pF Capacitive-Load Stability MAX IOUT = 10A VRS+ = 28V, VCC = 2.7V, IOUT = -500A, VSENSE = 250mV VRS+ = 12V, VCC = 12V, CLOAD = 10pF TYP 0.25 20 VSENSE = 100mV to 6.25mV 20 VSENSE = 100mV Power-Supply Rejection PSR VOUT = 2V, VRS+ > 2V % s No sustained oscillations ROUT 2.5 5.5 VSENSE = 6.25mV to 100mV OUT Output Resistance V/V 1000 75 pF 1.5 85 dB Power-Up Time to 1% of Final Value VCC = 12V, VRS+ = 12V, VSENSE = 100mV, CLOAD = 10pF 0.5 ms Saturation Recovery Time (Note 9) VCC = 12V, VRS+ = 12V, CLOAD = 10pF 0.1 ms Note 1: All devices are 100% production tested at TA = +25C. All temperature limits are guaranteed by design. Note 2: Guaranteed by PSR test. Note 3: Guaranteed by OUT Voltage Error test. Note 4: Output voltage is internally clamped not to exceed 12V. Note 5: VOS is extrapolated from the gain accuracy tests. Note 6: Total OUT voltage error is the sum of gain and offset voltage errors. Note 7: Measured at IOUT = -500A (RLOAD = 4k for gain = 20V/V, RLOAD = 10k for gain = 50V/V, RLOAD = 20k for gain = 100V/V). Note 8: 6.25mV = 1/16 of 100mV full-scale voltage (C/16). Note 9: The device will not reverse phase when overdriven. Maxim Integrated 3 MAX4372T/F/H Low-Cost, UCSP/SOT23, Micropower, High-Side Current-Sense Amplifier with Voltage Output Typical Operating Characteristics (VCC = 12V, VRS+ = 12V, VSENSE = 100mV, TA = +25C, unless otherwise noted.) AV = +100V/V AV = +50V/V 30.0 35 AV = +20V/V 30 AV = +100V/V 31.5 SUPPLY CURRENT (A) 32.5 32.0 MAX4372T toc02 MAX4372 toc01 40 SUPPLY CURRENT (A) 25 20 15 8 12 16 20 24 -15 28.0 10 35 60 85 8 12 16 20 24 1.0 -0.4 -0.6 -45 -50 -55 AV = +100V/V 0.5 PSR (dB) G = +50V/V G = +20V/V -40 28 MAX4372T toc06 1.5 AV = +50V/V AV = +20V/V 0 -60 -65 -70 -75 -80 -0.5 -1.0 -85 10 15 20 25 -90 -1.0 30 0 50 1.4 0.8 G = +50V/V G = +100V/V 0.4 G = +20V/V 10 15 20 300 100 1k -0.2 25 COMMON-MODE VOLTAGE (V) 30 AV = +100V/V -0.4 100k TOTAL OUTPUT ERROR vs. TEMPERATURE AV = +50V/V -0.3 10k FREQUENCY (Hz) AV = +20V/V -0.1 GAIN ACCURACY (%) 1.0 5 250 GAIN ACCURACY vs. TEMPERATURE 1.2 0 200 0 MAX4372T toc07 1.6 0.2 150 VSENSE (mV) TOTAL OUTPUT ERROR vs. COMMON-MODE VOLTAGE 0.6 100 -0.5 -0.6 -0.7 1.0 0.8 TOTAL OUTPUT ERROR (%) 5 MAX4372T toc08 0 SUPPLY VOLTAGE (V) OUTPUT ERROR (%) 4 POWER-SUPPLY REJECTION vs. FREQUENCY -0.8 4 VSENSE = 5mV 0 TOTAL OUTPUT ERROR vs. VSENSE OUTPUT ERROR (%) OUTPUT ERROR (%) -40 TOTAL OUTPUT ERROR vs. SUPPLY VOLTAGE -0.2 0 AV = +20V/V COMMON-MODE VOLTAGE (V) 0.4 -1.2 29.5 TEMPERATURE (C) G = +100V/V 0 AV = +50V/V SUPPLY VOLTAGE (V) 0.6 0.2 28 MAX4372T toc05 4 VSENSE = 5mV 0 MAX4372 toc04 0 30.0 28.5 5 VSENSE = 5mV 25.0 30.5 29.0 10 27.5 31.0 MAX4372T toc09 SUPPLY CURRENT (A) 35.0 SUPPLY CURRENT vs. COMMON-MODE VOLTAGE SUPPLY CURRENT vs. TEMPERATURE MAX4372 toc03 SUPPLY CURRENT vs. SUPPLY VOLTAGE 0.6 0.4 AV = +50V/V 0.2 0 -0.2 -0.4 -0.8 -0.6 -0.9 -0.8 AV = +100V/V AV = +20V/V -1.0 -1.0 -40 -15 10 35 TEMPERATURE (C) 60 85 -40 -15 10 35 60 85 TEMPERATURE (C) Maxim Integrated MAX4372T/F/H Low-Cost, UCSP/SOT23, Micropower, High-Side Current-Sense Amplifier with Voltage Output Typical Operating Characteristics (continued) (VCC = 12V, VRS+ = 12V, VSENSE = 100mV, TA = +25C, unless otherwise noted.) MAX4372T SMALL-SIGNAL TRANSIENT RESPONSE MAX4372F SMALL-SIGNAL TRANSIENT RESPONSE MAX4372H SMALL-SIGNAL TRANSIENT RESPONSE MAX4372T toc10 MAX4372T toc11 MAX4372T toc12 30mV 30mV VSENSE 30mV VSENSE VSENSE 10mV 10mV 600mV VOUT 10mV 3V 1.5V VOUT VOUT 200mV 1V 0.5V 20s/div 20s/div 20s/div MAX4372F LARGE-SIGNAL TRANSIENT RESPONSE MAX4372T LARGE-SIGNAL TRANSIENT RESPONSE MAX4372T toc14 MAX4372T toc13 150mV VSENSE 150mV VSENSE 50mV 50mV 3V 7.5V VOUT VOUT 2.5V 1V 20s/div 20s/div MAX4372H LARGE-SIGNAL TRANSIENT RESPONSE SMALL-SIGNAL GAIN vs. FREQUENCY MAX4372T toc15 MAX4372T toc16 3 2 1 100mV VSENSE G = 50V/V 0 10V GAIN (dB) 0 G = 20V/V -1 -2 -3 G = 100V/V -4 VOUT -5 -6 0 -7 -8 20s/div VSENSE = 20mV 1k 10k 100k 1M FREQUENCY (Hz) Maxim Integrated 5 MAX4372T/F/H Low-Cost, UCSP/SOT23, Micropower, High-Side Current-Sense Amplifier with Voltage Output Pin/Bump Description PIN BUMP SOT23 1 SO 3 UCSP A2 2 4 3 4 NAME FUNCTION GND Ground A3 OUT Output Voltage. VOUT is proportional to the magnitude of VSENSE (VRS+ - VRS-). 1 A1 VCC Supply Voltage. Use at least a 0.1F capacitor to decouple VCC from fast transients. 8 B1 RS+ Power Connection to the External Sense Resistor 5 6 B3 RS- Load-Side Connection to the External Sense Resistor -- 2, 5, 7 -- N.C. No Connection. Not internally connected. _______________Detailed Description The MAX4372 high-side current-sense amplifier features a 0 to 28V input common-mode range that is independent of supply voltage. This feature allows the monitoring of current flow out of a battery in deep discharge, and also enables high-side current sensing at voltages far in excess of the supply voltage (VCC). Current flows through the sense resistor, generating a sense voltage (Figure 1). Since A1's inverting input is high impedance, the voltage on the negative terminal equals VIN - VSENSE. A1 forces its positive terminal to match its negative terminal; therefore, the voltage across RG1 (VIN - V1-) equals VSENSE. This creates a current to flow through RG1 equal to VSENSE / RG1. The transistor and current mirror amplify the current by a factor of . This makes the current flowing out of the current mirror equal to: IM = VSENSE / RG1 A2's positive terminal presents high impedance, so this current flows through RGD, with the following result: V2+ = RGD * VSENSE / RG1 R1 and R2 set the closed-loop gain for A2, which amplifies V2+, yielding: VOUT = RGD * * VSENSE / RG1 (1 + R2 / R1) The gain of the device equals: VOUT = RGD * (1 + R2 / R1) / RG1 VSENSE __________Applications Information Recommended Component Values The MAX4372 operates over a wide variety of current ranges with different sense resistors. Table 1 lists common resistor values for typical operation of the MAX4372. 6 VIN 0 TO 28V RG1 100k 2.7V TO 28V V1+ VCC A1 RG2 100k RS+ RSENSE ILOAD V1CURRENT MIRROR RGD IM TO LOAD MAX4372T/F/H OUT VSENSE RS- V2+ A2 V2- R2 R1 GND Figure 1. Functional Diagram Choosing RSENSE Given the gain and maximum load current, select RSENSE such that VOUT does not exceed VCC - 0.25V or 10V. To measure lower currents more accurately, use a high value for RSENSE. A higher value develops a higher sense voltage, which overcomes offset voltage errors of the internal current amplifier. In applications monitoring very high current, ensure RSENSE is able to dissipate its own I2R losses. If the resistor's rated power dissipation is exceeded, its value may drift or it may fail altogether, causing a differential voltage across the terminals in excess of the absolute maximum ratings. Maxim Integrated MAX4372T/F/H Low-Cost, UCSP/SOT23, Micropower, High-Side Current-Sense Amplifier with Voltage Output Table 1. Recommended Component Values FULL-SCALE LOAD CURRENT, ILOAD (A) 0.1 1 5 10 CURRENT-SENSE RESISTOR, RSENSE (m) 1000 100 20 10 Using a PC Board Trace as RSENSE If the cost of RSENSE is an issue and accuracy is not critical, use the alternative solution shown in Figure 2. This solution uses copper PC board traces to create a sense resistor. The resistivity of a 0.1-inch-wide trace of 2-ounce copper is about 30m/ft. The resistance temperature coefficient of copper is fairly high (approximately 0.4%/C), so systems that experience a wide temperature variance must compensate for this effect. In addition, self-heating will introduce a nonlinearity error. Do not exceed the maximum power dissipation of the copper trace. For example, the MAX4372T (with a maximum load current of 10A and an RSENSE of 5m) creates a full-scale VSENSE of 50mV that yields a maximum VOUT of 1V. RSENSE, in this case, requires about 2 inches of 0.1inch-wide copper trace. GAIN (V/V) FULL-SCALE OUTPUT VOLTAGE (FULL-SCALE VSENSE = 100mV), VOUT (V) 20 2.0 50 5.0 100 10.0 20 2.0 50 5.0 100 10.0 20 2.0 50 5.0 100 10.0 20 2.0 50 5.0 100 10.0 INPUT 0.3in COPPER LOAD/BATTERY RSENSE 0.1in COPPER 0.3in COPPER VSENSE RS+ VCC 2.7V TO 28V MAX4372T/F/H RS- OUT GND UCSP Applications Information For the latest application details on UCSP construction, dimensions, tape carrier information, printed circuit board techniques, bump-pad layout, and recommended reflow temperature profile, as well as the latest information on reliability testing results, go to the Maxim's website at www.maxim-ic.com/ucsp to find the Application Note: UCSP--A Wafer-Level Chip-Scale Package. Maxim Integrated Figure 2. Connections Showing Use of PC Board 7 MAX4372T/F/H Low-Cost, UCSP/SOT23, Micropower, High-Side Current-Sense Amplifier with Voltage Output d Ordering Information (continued) PART TEMP RANGE PIN-PACKAGE Pin Configurations (continued) TOP MARK MAX4372FEUK+T -40C to +85C 5 SOT23-5 T -40C to +85C 8 SO MAX4372FESA+T ADIV -- MAX4372FEBT+T -40C to +85C 3 x 2 UCSP ACY MAX4372HEUK+T -40C to +85C 5 SOT23-5 +T -40C to +85C 8 SO MAX4372HESA+T MAX4372HEBT+T -40C to +85C 3 x 2 UCSP +Denotes a lead(Pb)-free/RoHS-compliant package. T = Tape and reel. ADIW -- ACZ + VCC 1 8 RS+ N.C. 2 7 N.C. GND 3 6 RS- OUT 4 5 N.C. MAX4372T/F/H SO Chip Information PROCESS: BiCMOS Package Information For the latest package outline information and land patterns, go to www.maxim-ic.com/packages. Note that a "+", "#", or "-" in the package code indicates RoHS status only. Package drawings may show a different suffix character, but the drawing pertains to the package regardless of RoHS status. OUTLINE NO. LAND PATTERN NO. 5 SOT23 PACKAGE CODE U5+1 21-0057 90-0174 8 SO S8+2 21-0041 90-0096 5 UCSP B6+2 21-0097 6L, UCSP.EPS PACKAGE TYPE Note: MAX4372_EBT uses package code B6-2. 8 Maxim Integrated MAX4372T/F/H Low-Cost, UCSP/SOT23, Micropower, High-Side Current-Sense Amplifier with Voltage Output Package Information (continued) SOICN .EPS For the latest package outline information and land patterns, go to www.maxim-ic.com/packages. Note that a "+", "#", or "-" in the package code indicates RoHS status only. Package drawings may show a different suffix character, but the drawing pertains to the package regardless of RoHS status. Maxim Integrated 9 MAX4372T/F/H Low-Cost, UCSP/SOT23, Micropower, High-Side Current-Sense Amplifier with Voltage Output Package Information (continued) SOT-23 5L .EPS For the latest package outline information and land patterns, go to www.maxim-ic.com/packages. Note that a "+", "#", or "-" in the package code indicates RoHS status only. Package drawings may show a different suffix character, but the drawing pertains to the package regardless of RoHS status. 10 Maxim Integrated MAX4372T/F/H Low-Cost, UCSP/SOT23, Micropower, High-Side Current-Sense Amplifier with Voltage Output Revision History REVISION NUMBER REVISION DATE 4 7/09 Updated feature in accordance with actual performance of the product 5 5/11 Updated VRST conditions to synchronize with tested material and added lead-free designation DESCRIPTION PAGES CHANGED 1 1, 2, 3, 8 Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time. The parametric values (min and max limits) shown in the Electrical Characteristics table are guaranteed. Other parametric values quoted in this data sheet are provided for guidance. Maxim Integrated 160 Rio Robles, San Jose, CA 95134 USA 1-408-601-1000 (c) Maxim Integrated 11 The Maxim logo and Maxim Integrated are trademarks of Maxim Integrated Products, Inc.