AC axial fan - HyBlade(R) S4E500-AM03-01 sickled blades (S series) with guard grille for short nozzle ebm-papst Mulfingen GmbH & Co. KG Bachmuhle 2 * D-74673 Mulfingen Phone +49 7938 81-0 Fax +49 7938 81-110 info1@de.ebmpapst.com www.ebmpapst.com Limited partnership * Headquarters Mulfingen County court Stuttgart * HRA 590344 General partner Elektrobau Mulfingen GmbH * Headquarters Mulfingen County court Stuttgart * HRB 590142 Nominal data Type S4E500-AM03-01 Motor M4E110-GF Phase 1~ 1~ Nominal voltage VAC 230 230 Frequency Hz 50 60 Type of data definition ml ml Valid for approval / standard CE CE Speed min-1 1300 1400 Power input W 680 880 Current draw A 3.0 3.88 Motor capacitor F 12 12 Capacitor voltage VDB 450 450 Max. back pressure Pa 150 100 Min. ambient temperature C -40 -40 Max. ambient temperature C 65 40 ml = Max. load * me = Max. efficiency * fa = Running at free air * cs = Customer specs * cu = Customer unit Subject to alterations Data according to ErP directive Request 2013 Request 2015 32.5 28.5 32.5 40 36 40 A Overall efficiency es Efficiency category Static Efficiency grade N Variable speed drive No Power input Pe kW 0.65 Specific ratio* 1.00 Air flow qv m/h 5765 Pressure increase pfs Pa 129 Speed n min-1 1315 * Specific ratio = 1 + pfs / 100 000 Pa % Actual Installation category Data definition with optimum efficiency. LU-107128 The ErP data is determined using a motor-impeller combination in a standardised measurement configuration. Item no. 10081-5-9980 * Revision 82542 * Release 2014-05-08 * Page 1 / 6 ebm-papst Mulfingen GmbH & Co. KG * Bachmuhle 2 * D-74673 Mulfingen * Phone +49 (0) 7938 81-0 * Fax +49 (0) 7938 81-110 * info1@de.ebmpapst.com * www.ebmpapst.com AC axial fan - HyBlade(R) S4E500-AM03-01 sickled blades (S series) with guard grille for short nozzle Technical features Size 500 mm Surface of rotor Coated in black Material of terminal box PC/ABS plastic, black Material of blades Press-fitted sheet steel blank, sprayed with PP plastic Material of guard grille Steel, phosphated and coated in black plastic Number of blades 5 Direction of air flow "V" Direction of rotation Counter-clockwise, seen on rotor Type of protection IP 54 Insulation class "F" Humidity class F4-1 Max. permissible ambient motor temp. (transp./ storage) + 80 C Min. permissible ambient motor temp. (transp./storage) - 40 C Mounting position Shaft horizontal or rotor on bottom; rotor on top on request Condensate discharge holes Rotor-side Operation mode S1 Motor bearing Ball bearing Touch current acc. IEC 60990 (measuring network Fig. 4, TN system) <= 3.5 mA Electrical leads Via terminal box, integrated capacitor connected via terminal box Motor protection Thermal overload protector (TOP) brought out Cable exit Axial Protection class I (if protective earth is connected by customer) Product conforming to standard EN 61800-5-1; CE Approval CSA C22.2 Nr.100; EAC; UL 1004-1; VDE Item no. 10081-5-9980 * Revision 82542 * Release 2014-05-08 * Page 2 / 6 ebm-papst Mulfingen GmbH & Co. KG * Bachmuhle 2 * D-74673 Mulfingen * Phone +49 (0) 7938 81-0 * Fax +49 (0) 7938 81-110 * info1@de.ebmpapst.com * www.ebmpapst.com S4E500-AM03-01 AC axial fan - HyBlade(R) sickled blades (S series) with guard grille for short nozzle Product drawing 1 Direction of air flow "V" 2 Tightening torque 0.80.15 Nm 3 Cable diameter: min. 6 mm, max. 12 mm, tightening torque: 2.00.3 Nm Item no. 10081-5-9980 * Revision 82542 * Release 2014-05-08 * Page 3 / 6 ebm-papst Mulfingen GmbH & Co. KG * Bachmuhle 2 * D-74673 Mulfingen * Phone +49 (0) 7938 81-0 * Fax +49 (0) 7938 81-110 * info1@de.ebmpapst.com * www.ebmpapst.com AC axial fan - HyBlade(R) S4E500-AM03-01 sickled blades (S series) with guard grille for short nozzle Connection screen L = U1 = blue Z brown PE green / yellow TOP grey N = U2 = black Item no. 10081-5-9980 * Revision 82542 * Release 2014-05-08 * Page 4 / 6 ebm-papst Mulfingen GmbH & Co. KG * Bachmuhle 2 * D-74673 Mulfingen * Phone +49 (0) 7938 81-0 * Fax +49 (0) 7938 81-110 * info1@de.ebmpapst.com * www.ebmpapst.com AC axial fan - HyBlade(R) S4E500-AM03-01 sickled blades (S series) with guard grille for short nozzle Charts: Air flow 50 Hz qv[cfm] 3.000 2.000 4.000 5.000 4 3 2 a] pf s[P 190 185 180 175 170 165 160 155 150 145 140 135 130 125 120 115 110 105 100 95 90 85 80 75 70 65 60 55 50 45 40 35 30 25 20 15 10 5 0 1.000 1 0 1.000 2.000 3.000 4.000 5.000 qv[m^3/h] 6.000 7.000 8.000 9.000 0,76 0,74 0,72 0,7 0,68 0,66 0,64 0,62 0,6 0,58 0,56 0,54 0,52 0,5 0,48 0,46 0,44 0,42 0,4 0,38 0,36 0,34 0,32 0,3 0,28 0,26 0,24 0,22 0,2 0,18 0,16 0,14 0,12 0,1 0,08 0,06 0,04 0,02 0 Air performance measured as per ISO 5801 Installation category A. For detailed information on the measuring set-up, please contact ebm-papst. Suction-side noise levels: LwA measured as per ISO 13347 / LpA measured with 1m distance to fan axis. The values given are valid under the measuring conditions mentioned above and may vary according to the actual installation situation. With any deviation from the standard set-up, the specific values have to be checked and reviewed with the unit installed. p fs_E[IN H2O] pf s[Pa] Druck p f s[Pa]fur Rho=1,2kg/m^3 0 Measured values U f n Pe I LpAin LwAin LwAout qv pfs V Hz min-1 W A dB(A) dB(A) dB(A) m3/h Pa 1 230 50 1380 513 2.25 68 75 75 8905 0 2 230 50 1355 571 2.50 65 72 72 7930 50 3 230 50 1330 623 2.73 63 70 70 6705 100 4 230 50 1300 680 3.00 65 72 71 5140 150 U = Supply voltage * f = Frequency * n = Speed * Pe = Power input * I = Current draw * LpAin = Sound pressure level inlet side * LwAin = Sound power level inlet side * LwAout = Sound power level outlet side qv = Air flow * pfs = Pressure increase Item no. 10081-5-9980 * Revision 82542 * Release 2014-05-08 * Page 5 / 6 ebm-papst Mulfingen GmbH & Co. KG * Bachmuhle 2 * D-74673 Mulfingen * Phone +49 (0) 7938 81-0 * Fax +49 (0) 7938 81-110 * info1@de.ebmpapst.com * www.ebmpapst.com AC axial fan - HyBlade(R) S4E500-AM03-01 sickled blades (S series) with guard grille for short nozzle Charts: Air flow 60 Hz Druck p f s[Pa]fur Rho=1,2kg/m^3 200 0 1.000 2.000 qv[cfm] 4.000 3.000 5.000 6.000 7.000 190 0,8 0,75 180 0,7 170 Air performance measured as per ISO 5801 Installation category A. For detailed information on the measuring set-up, please contact ebm-papst. Suction-side noise levels: LwA measured as per ISO 13347 / LpA measured with 1m distance to fan axis. The values given are valid under the measuring conditions mentioned above and may vary according to the actual installation situation. With any deviation from the standard set-up, the specific values have to be checked and reviewed with the unit installed. 0,65 160 150 0,6 140 0,55 130 0,5 120 pf s[Pa] 4 100 0,4 90 p fs_E[IN H2O] 0,45 110 0,35 80 0,3 3 70 0,25 60 50 0,2 2 40 0,15 30 0,1 20 0 0,05 a] pf s[P 10 1 0 1.000 2.000 3.000 4.000 5.000 6.000 7.000 qv[m^3/h] 8.000 9.000 10.000 11.000 12.000 0 13.000 Measured values U f n Pe I LpAin LwAin LwAout qv pfs V Hz min-1 W A dB(A) dB(A) dB(A) m3/h Pa 1 230 60 1530 793 3.45 70 77 78 9850 0 2 230 60 1485 828 3.61 68 75 75 8990 40 3 230 60 1450 853 3.73 66 73 73 8220 70 4 230 60 1400 880 3.88 65 72 72 7300 100 U = Supply voltage * f = Frequency * n = Speed * Pe = Power input * I = Current draw * LpAin = Sound pressure level inlet side * LwAin = Sound power level inlet side * LwAout = Sound power level outlet side qv = Air flow * pfs = Pressure increase Item no. 10081-5-9980 * Revision 82542 * Release 2014-05-08 * Page 6 / 6 ebm-papst Mulfingen GmbH & Co. KG * Bachmuhle 2 * D-74673 Mulfingen * Phone +49 (0) 7938 81-0 * Fax +49 (0) 7938 81-110 * info1@de.ebmpapst.com * www.ebmpapst.com