DATA SHEET SKY65132: WLAN Power Amplifier Module Applications Description * IEEE802.11 b/g WLAN Skyworks SKY65132 is a Microwave Monolithic Integrated Circuit (MMIC) Power Amplifier (PA) with superior output power, linearity, and efficiency. These features make the SKY65132 ideal for Wireless Local Area Network (WLAN) applications. * ISM band * WCS fixed wireless * Wireless access nodes Features * Single 3.3 V supply * Linear output power of +29 dBm for IEEE802.11b mask * Linear output power of +27 dBm for IEEE802.11g mask * High gain of 33 dB The device is fabricated using Skyworks high reliability Indium Gallium Phosphide (InGaP) Heterojunction Bipolar Transistor (HBT) technology. The device is internally matched and mounted in a 20-pin, 6 x 6 mm Multi-Chip Module (MCM) Surface-Mounted Technology (SMT) package, which allows for a highly manufacturable low cost solution. The device package and pinout for the 20-pin MCM are shown in Figure 1. A block diagram of the SKY65132 is shown in Figure 2. GND 19 18 17 15 VCC_DET GND 3 14 V_DET VC_BIAS 4 13 VCC2 VREF1 5 12 VDET_CNTL VREF2 6 11 VCC3 7 8 9 10 GND 2 GND RF_OUT VCC1 1 GND Skyworks offers lead (Pb)-free, RoHS (Restriction of Hazardous Substances) compliant packaging. 20 16 GND VREF3 * Small footprint, MCM (20-pin, 6 x 6 mm) Pb-free (MSL3, 250 C per JEDEC J-STD-020) SMT package RF_IN * Internal RF match and bias circuits GND * Superior gain flatness GND * Output power detector: 20 dB dynamic range S414 Figure 1. SKY65132 Pinout - 20-Pin MCM (Top View) Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 103252F * Skyworks Proprietary and Confidential information * Products and Product Information are Subject to Change Without Notice * March 21, 2006 1 DATA SHEET * SKY65132 WLAN PA VCC1 VC_BIAS VREF1, VREF2 VREF3 VCC3 Active Bias RF_IN Input Match Stage 1 PA Inter-Stage Match Stage 2 PA Inter-Stage Match VCC_DET Detector V_DET Output Match RF_OUT Stage 3 PA VCC2 S413 Figure 2. SKY65132 Block Diagram Technical Description The SKY65132 PA contains all of the needed RF matching and DC biasing circuits. The device also provides an output power detector voltage. The SKY65132 is a three-stage, HBT InGaP device optimized for high linearity and power efficiency. These features make the device suitable for wideband digital applications, where PA linearity and power consumption are of critical importance (e.g., WLANs). The device has been characterized with the highest specified data rates for 802.11b (11 Mbps) and 802.11g (54 Mbps). Under these stringent test conditions, the device exhibits excellent spectral purity and power efficiency. Package and Handling Information Since the device package is sensitive to moisture absorption, it is baked and vacuum packed before shipping. Instructions on the shipping container label regarding exposure to moisture after the container seal is broken must be followed. Otherwise, problems related to moisture absorption may occur when the part is subjected to high temperature during solder assembly. The SKY65132 is rated to Moisture Sensitivity Level 3 (MSL3) at 250 C. It can be used for lead or lead-free soldering. For additional information, refer to Skyworks Application Note, PCB Design and SMT Assembly/Rework Guidelines for MCM-L Packages, document number 101752. Care must be taken when attaching this product, whether it is done manually or in a production solder reflow environment. Production quantities of this product are shipped in a standard tape and reel format. For packaging details, refer to the Skyworks Application Note, Tape and Reel, document number 101568. Electrical and Mechanical Specifications Signal pin assignments and functional pin descriptions are described in Table 1. The absolute maximum ratings of the SKY65132 are provided in Table 2. Electrical specifications are provided in Table 3. Typical performance characteristics are shown in Figures 3 through 10. Figure 11 provides a typical evaluation board schematic. The evaluation board assembly drawing is provided in Figure 12. The evaluation board layer detail is shown in Figure 13 and the layer detail physical characteristics in Figure 14. Package dimensions for the SKY65132 20-pin MCM are shown in Figure 15, and tape and reel dimensions are shown in Figure 16. Electrostatic Discharge (ESD) Sensitivity The SKY65132 is a static-sensitive electronic device. Do not operate or store near strong electrostatic fields. Take proper ESD precautions. Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 2 March 21, 2006 * Skyworks Proprietary and Confidential information * Products and Product Information are Subject to Change Without Notice * 103252F DATA SHEET * SKY65132 WLAN PA Table 1. SKY65132 Signal Descriptions Pin # 1 Name GND Description Pin # Ground 11 Name Description VCC3 Stage 3 collector voltage 2 GND Ground 12 VDET_CNTL Detector voltage control 3 GND Ground 13 VCC2 Stage 2 collector voltage 4 VC_BIAS Bias voltage 14 V_DET Detector output signal 5 VREF1 Bias reference voltage 1 15 VCC_DET Detector supply voltage 6 VREF2 Bias referance voltage 2 16 VCC1 Stage 1 collector voltage 7 VREF3 Bias referance voltage 3 17 GND Ground 8 GND Ground 18 RF_IN RF input 9 RF_OUT RF output 19 GND Ground 10 GND Ground 20 GND Ground Table 2. SKY65132 Absolute Maximum Ratings Maximum Units RF output power Parameter POUT Symbol Minimum 30 dBm Supply voltage VC_BIAS, VREF1, VREF2, VREF3, VCC1, VCC2, VCC3, and VCC_DET 5 V Supply current (ID + IBIAS) ICC 1100 mA 4.0 W Power dissipation Case operating temperature TC -40 +85 C Storage temperature TST -55 +125 C Junction temperature TJ +150 C Note: Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set at or below their nominal value. Table 3. SKY65132 Recommended Operating Conditions Parameter Symbol Minimum Typical Maximum Units 27 29 dBm 3.3 3.6 V -40 +85 C -55 +125 C RF output power POUT Supply voltage VC_BIAS, VREF1, VREF2, VREF3, VCC1, VCC2, VCC3, and VCC_DET 3.0 Case operating temperature TC Storage temperature TST Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 103252F * Skyworks Proprietary and Confidential information * Products and Product Information are Subject to Change Without Notice * March 21, 2006 3 DATA SHEET * SKY65132 WLAN PA Table 4. SKY65132 Electrical Specifications (VCC = 3.3 V, TC = +25 C, Test Frequency = 2.442 GHz unless otherwise noted) Parameter Symbol Test Condition Min Typical Max Units Using IEEE802.11b Complimentary Code Keying Input Signal, Data Rate = 11 Mbps Supply current ICC 950 mA Output power (Note 1) POUT 29 dBm Power added efficiency (Note 2) PAE 20 % Ramp-up/ramp-down (Note 3) TS <0.5 s Using IEEE802.11g Orthogonal Frequency Division Multiplexing Input Signal, Data Rate = 54 Mbps Supply current ICC 750 mA Output power (Note 4) POUT 27 dBm Power added efficiency (Note 2) PAE 18 % 33.0 dB Using Continuous Wave Input Signals Small signal gain G Continuous wave 31.5 Gain flatness over band From 2.4 GHz to 2.5 GHz 1.0 dB Gain flatness over channel (16.25 MHz) Over any 16.25 MHz within band 0.4 dB Output power @ 1 dB compression P1dB Quiescent Current IQ Continuous wave 29.0 330 380 mA Noise Figure NF 5.0 6.5 dB Power added efficiency PAE @P1dB 30 24 dBm 29 % Note 1: Defined as the maximum power level for which the IEEE802.11b transmit mask requirements are met. Note 2: Measured at the specified average output RF power and modulation type. Note 3: Ramp-up and ramp-down times are defined from the 10% to 90% power points. Note 4: Defined as the maximum power level for which the IEEE802.11g transmit mask requirements are met. 35.0 34.5 35 34.0 Gain (dB) 33.5 Gain (dB) 34 33.0 32.5 33 32.0 31.5 31.0 32 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 POUT (dBm) Figure 3. Typical Gain vs POUT @ 2.442 GHz 29 30 31 2.40 2.41 2.42 2.43 2.44 2.45 2.46 2.47 2.48 Frequency (GHz) Figure 4. Typical Gain vs Frequency Response Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 4 March 21, 2006 * Skyworks Proprietary and Confidential information * Products and Product Information are Subject to Change Without Notice * 103252F 2.49 2.50 DATA SHEET * SKY65132 WLAN PA 35 2.1 30 1.9 1,7 1.5 20 VDET (V) PAE (%) 25 15 1.3 1.1 10 0.9 5 0.7 0 0.5 19 20 21 22 23 24 25 26 27 28 29 30 19 20 21 22 23 24 POUT (dBm) 25 26 27 28 29 30 31 POUT (dBm) Figure 5. Power-Added Efficiency vs POUT @ 2.442 GHz Figure 6. Detector Output Voltage vs POUT @ 2.442 GHz 6.0 8 7 5.5 5 EVM (%) Noise Figure (dBm) 6 5.0 4.5 4 3 4.0 2 3.5 1 3.0 0 2.40 2.41 2.42 2.43 2.44 2.45 2.46 2.47 2.48 2.49 2.50 19 20 21 Frequency (GHz) 23 24 25 26 POUT (dBm) Figure 7. Typical Noise Figure Performance vs Frequency Figure 8. EVM vs POUT @ 2.442 GHz (802.11g, 64 Quadrature Amplitude Modulated, 54 Mbps Input Signal) +10 +10 0 0 -10 Relative Power (dB) Relative Power (dB) 22 -20 -30 -40 POUT = +29 dBm -50 2.417 2.423 2.430 2.436 2.442 2.448 -20 -30 -40 -60 2.411 -10 2.454 2.461 2.467 2.473 Frequency (GHz) Figure 9. Output Spectrum Response for 802.11b @ 2.442 GHz (11 Mbps Input Signal) -50 2.411 POUT = +27 dBm 2.417 2.423 2.430 2.436 2.442 2.448 2.454 2.461 2.467 2.473 Frequency (GHz) Figure 10. Output Spectrum Repsonse for 802.11g @ 2.442 GHz (64 Quadrature Amplitude Modulated, 54 Mbps Input Signal) Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 103252F * Skyworks Proprietary and Confidential information * Products and Product Information are Subject to Change Without Notice * March 21, 2006 5 DATA SHEET * SKY65132 WLAN PA Reference Voltage 3 GND 3 GND VDET VCC1 16 L1 10 nH L2 10 nH Detector Output SKY65132 VC_BIAS 13 C8 3300 pF VREF1 VDET_CNTL GND RF_OUT 9 VREF2 GND 6 C3 3300 pF VCC3 Collector Voltage (Stage 2) C16 10 F 12 11 R4 51 L3 0 C9 270 pF 10 5 C2 3300 pF R3 82 C14 DNI C4 3300 pF C10 3300 pF C17 10 F Note: Evaluation Board material: four-layer Rogers 4003-12, er = 3.38 Collector Voltage (Stage 3) S415 Figure 10. SKY65132 Evaluation Board Schematic C5 C15 C6 C11 C1 L1 C7 C12 C2 L2 J3 R1 C13 J4 C8 C16 L3 C3 R4 R2 C10 R3 C14 C17 C9 C4 J2 S588 Figure 11. Evaluation Board Assembly Drawing Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 6 Collector Voltage (Stage 1) Detector Supply Voltage C6 3300 pF 15 14 C15 10 F C7 8.2 pF VCC2 R2 82 C13 DNI GND VCC_DET C1 3300 pF R1 300 C12 DNI GND GND 7 Reference Voltage 2 2 8 Reference Voltage 1 C5 3300 pF GND VREF3 C11 10 F 17 1 4 Bias Voltage 18 RF_IN 19 20 March 21, 2006 * Skyworks Proprietary and Confidential information * Products and Product Information are Subject to Change Without Notice * 103252F DATA SHEET * SKY65132 WLAN PA Layer 1: Top Metal Layer 2: Ground Layer 3: Inner Traces Layer 4: Ground S590 Figure 12. Evaluation Board Layer Detail Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 103252F * Skyworks Proprietary and Confidential information * Products and Product Information are Subject to Change Without Notice * March 21, 2006 7 DATA SHEET * SKY65132 WLAN PA Cross Section Name Thickness (mils) Material r L1 1.4 Cu, 1 oz. - Lam1 12 Rogers 4003-12 3.38 L2_GND 1.4 Cu, 1 oz - 4 FR4-4 4.35 L3_GND 1.4 Cu, 1 oz. - Lam3 12 FR4-12 4.35 L4 1.4 Cu, 1 oz. - Lam2 S573 Figure 13. Layer Detail Physical Characteristics 2.075 0.05 1.9 0.05 6.0 0.05 Pin 1 Metal Pad - Pin 1 1.5 0.05 2.75 0.05 2.5 0.05 6.0 0.05 1.5 0.05 0.5 1.9 0.05 Detail A Top View Bottom View 0.5 0.075 0.1 1.45 0.10 0.5 0.03 Metal Pad Edge Side View All dimensions are in millimeters Detail A Figure 14. SKY65132 20-Pin MCM Package Dimensions Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 8 March 21, 2006 * Skyworks Proprietary and Confidential information * Products and Product Information are Subject to Change Without Notice * 103252F S416 DATA SHEET * SKY65132 WLAN PA 2.00 0.05 4.00 8.00 1.55 0.05 0.30 0.05 B 5.50 0.05 A 1.75 0.10 6.30 A 12.00 0.30 Pin #1 Indicator 5o Max. B 1.50 Min. 1.70 6.30 B 5o Max. Notes: 1. Carrier tape: black conductive polystyrene 2. Cover tape material: transparent conductive PSA 3. Cover tape size: 9.3 mm width 4. All dimensions are in millimeters A C1222 Figure 15. SKY65132 20-Pin MCM Tape and Reel Dimensions Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 103252F * Skyworks Proprietary and Confidential information * Products and Product Information are Subject to Change Without Notice * March 21, 2006 9 DATA SHEET * SKY65132 WLAN PA Ordering Information Model Name SKY65132 WLAN Power Amplifier Module Manufacturing Part Number SKY65132-21 (Pb-free package) Evaluation Kit Part Number TW13-D121 Copyright (c) 2004, 2005, 2006 Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. ("Skyworks") products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks, the Skyworks symbol, and "Breakthrough Simplicity" are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference. Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 10 March 21, 2006 * Skyworks Proprietary and Confidential information * Products and Product Information are Subject to Change Without Notice * 103252F