851-800-526-2324 • www.us.tdk-lambda.com/lp/ Disclaimer: us.tdk-lambda.com/lp/legal.htm
PFE300-700S Series
Features
Low profi le, small size
100°C baseplate temperature
High power density
High Effi ciency
Suitable for conduction cooling
Power Factor Corrected (PFC)
300 to 700W AC-DC Power Module
Notes: (Consult Installation Manual for detailed specifi cations, test methods and application notes)
1) External components are required, consult Application Notes
2) PFE500S-12, -40 to 85°C. See instruction manuals for derating curves
3) Reduced PFC above 63Hz. Contact technical support for 440Hz operation.
PFE300S PFE700S
Model PFE500S
AC Input VAC 85 to 265VAC, 47-63Hz (up to 440Hz) (3)
Input Current (100 / 220VAC) A 4.0 / 2.0 8.8 / 4.4
Model dependant 6.2 / 3.2
Inrush Current (100 /200VAC) (1) A 20 / 40 peak
Power Factor - 0.95 minimum, meets EN61000-3-2
Output Voltage Setpoint Accuracy - ±2% ±1V
Ripple and Noise (1) - 1% 4V
Over Current Protection % 105 - 140% (Automatic Recovery)
Over Voltage Protection - 125 - 145% 60 - 69.6V
Series Operation - Yes
Parallel Operation - No Yes (Droop mode)
Power On Signal (ENA) - Open collector (10mA sink current). Low (on) when output is present
Auxiliary Supply - None None
Remote On/Off (Opto isolated) - None None
Overtemperature Protection - Yes
Operating Baseplate Temp. °C -40 to +100°C (2)
Storage Temperature °C -40 to +100°C
Humidity (non condensing) - Operating: 20 - 95%RH, Non Operating: 10 - 95%RH
Cooling - Conduction
Withstand Voltage (1 min) - Input to Output 3kVAC, Input to Baseplate 2.5kVAC, Output to Baseplate 1.5kVDC
Isolation Resistance - Output to baseplate: 100M Ohm at 500VDC, 25°C ambient, 70%RH
Vibration (non operating) - 10-55Hz (1 min sweep), constant amplitude 0.825mm (max 49m/s2), X, Y, Z 1 hour each
Shock - 196.1m/s2
Safety Certifi cations - UL60950-1, CSA60950-1 (cUL), EN60950-1, CE mark (LVD)
Weight g 250 250
Size (WxHxL) mm 61 x 12.7 x 116.8mm
in 2.4 x 0.5 x 4.6”
Warranty yrs 2 years
Specifi cations
Key Market Segments & Applications
861-800-526-2324 • www.us.tdk-lambda.com/lp/ Revision C3.1: Sept. 2014
PFE300-700S Series
For Additional Information, please visit
us.tdk-lambda.com/lp/products/pfe-series.htm
PFE500S Outline Drawing
PFE500S Basic connection
Heatsink Size (mm) PFE Module
HAF-10L 116.8 x 25.4 x 61 PFE300/500/700S
HAF-15L 116.8 x 38.1 x 61 PFE300/500/700S
HAF-15T 116.8 x 38.1 x 61 PFE300/500/700S
HAL-F12T 122 x 35 x 69.9 PFE500F
HAM-F10T 160 x 33.4 x 100 PFE1000F
Suffi x Description
Blank M3 tapped mounting inserts (4)
/T 3.3mm non-threaded inserts (4)
Heatsink Table
Options
Output Adjust. Maximum Maximum Load Line Effi ciency
Model Voltage (V) Range (V) Current (A) Wattage (W) Reg. (mV) Reg. (mV) typ
PFE300S-12 12 9.6 - 14.4 25 300 48 48 81 / 83
PFE500S-12 12 9.6 - 14.4 33 396 48 48 82 / 83
PFE300S-28 28 22.4 - 33.6 10.8 302 56 56 83 / 85
PFE500S-28 28 22.4 - 33.6 18 504 56 56 84 / 86
PFE300S-48 48 38.4 - 57.6 6.3 302 96 96 84 / 86
PFE500S-48 48 38.4 - 57.6 10.5 504 96 96 84 / 86
PFE700S-48 51 None 14 714 50 - 57V (4) 86 / 89
(4) Total regulation range
Specifi cations
