Series AM10EW-CZ 10 Watt | DC-DC Converter FEATURES: * * * * * * RoHS compliant Power modules for PCB mounting Wide 4:1 input range Regulated output Low ripple and noise Remote on/off control (optional) Input/Output Isolation 1500VDC Operating temperature -25oC to + 70oC Models Single output Model AM10EW-2403SCZ AM10EW-2405SCZ AM10EW-2412SCZ AM10EW-2415SCZ AM10EW-4803SCZ AM10EW-4805SCZ AM10EW-4812SCZ AM10EW-4815SCZ Input Voltage (V) Output Voltage (V) Output Current max (A) 10-40 10-40 10-40 10-40 18-75 18-75 18-75 18-75 3.3 5 12 15 3.3 5 12 15 2 2 0.83 0.67 2 2 0.83 0.67 Input Voltage (V) Output Voltage (V) Output Current max (A) Min. load (%) 3 3 0 0 3 3 0 0 Efficiency (%) 67 75 75 75 66 75 77 75 Models Dual output Model AM10EW-2405DCZ AM10EW-2412DCZ AM10EW-2415DCZ AM10EW-4805DCZ AM10EW-4812DCZ AM10EW-4815DCZ 10-40 10-40 10-40 18-75 18-75 18-75 5 12 15 5 12 15 Min. load (%) 1 0.415 0.333 1 0.415 0.333 3 3 3 3 3 3 Efficiency (%) 84 85 86 85 86 86 Input Specifications Parameters Conditions Typical Maximum 10-40 18-75 (Pi) Network Voltage range Filter Units VDC Isolation Specifications Parameters Conditions Rated voltage Resistance Capacitance Typical Maximum Units VDC MOhm pF Maximum Units 2 % 1500 > 100 1000 Output Specifications Parameters Voltage accuracy Short Circuit protection Over voltage protection Over load protection Line voltage regulation (Single) Line voltage regulation (Dual) Load voltage regulation (Single) Load voltage regulation (Dual) www.aimtec.com Conditions Typical Current limit, auto recovery Zener diode clamp Works 120% of rating and recovers automatically HL-LL 0.5 HL-LL 0.5 10-100% 1 10-100% 1 Tel: +1 514 620 2722 1 of 2 % % % % % Toll free: + 1 888 9 AIMTEC (926 6832) North America only Series AM10EW-CZ 10 Watt | DC-DC Converter Output Specifications (continued) Parameters Conditions Typical Temperature coefficient Ripple Noise Maximum Units 0.02 0.2% Vout + 40mV 0.5% Vout + 50mV %/oC Vp-p Vp-p General Specifications Parameters Switching frequency Operating temperature Storage temperature Case temperature Derating Cooling Humidity Case material Weight Dimensions MTBF Conditions 100% load Typical 300 Maximum Units KHz o -25 to +70 -55 to +105 C C o C o 100 Above +50C Free air convection 95 % Nickel coated copper with non conductive base, shielded on six sides 32 g Tolerance 0.5mm 1.97 x 1.00 x 0.425 inches 50.8 x 25.4 x 10.8 mm > 800 000 hrs (MIL-HDBK -217F, Ground Benign, t=+25oC) Safety Specifications Standards Safety Agency approvals EMI (Conducted & Radiated Emission)EN55022 class A CE, cULus Pin Out Specifications Dimensions Pin Single Dual 1 2 On/Off Control (optional) -V Input +V Input On/Off Control (optional) -V Input +V Input -V Output No Pin +V Output -V Output Common +V Output Single output 3 4 5 6 Derating Block diagram Single output Dual output www.aimtec.com Tel: +1 514 620 2722 2 of 2 Toll free: + 1 888 9 AIMTEC (926 6832) North America only