ENTERTAINMENT INTERCONNECT CATALOGUE - Amphenol Australia Pty Ltd Telephone 61 3 8796 8888 Fax 61 3 8796 8801 www.amphenol.com.au
EP / AP SERIES
HIGH POWER
CONNECTORS
Options
• Solder Bucket termination
• Nickel Plated Zinc Alloy shell
• Black finished Zinc Alloy shell
• Precision machined contacts
• Thermoplastic shell
Ordering Codes
We have listed the more common ordering
codes in each section. Please contact us if
you need any further assistance.
The EP Series incorporates a r ugged zinc
diecast shell to give it maximum durability
when used in demanding situations. The EP
cable connector cable flex relief design
minimises cable bend stress at point of entr y
into the connector housing.
The AP Series Shell is manufactured from
tough, durable thermoplastic, and ideal for
fixed indoor installations. Both the EP and AP
Series utilise the same contact and insulator
components.
Features
• High current contacts for distortion free signal.
• Tough, durable zinc diecast shell for the EP
series.
• Cost effective durable thermoplastic shell for
the AP series.
• EP series available in 3, 4, 5, 6 and 8 contact
arrangements
• AP series available in 4, 5, 6, and 8 contact
arrangements.
• Cable clamp capable of supporting cables
from 9mm (0.35") to 16mm (0.63") in
diameter.
• Quick release, vibration resistant latch lock.
• EP Cable Connectors are supplied with two
different boots for different cable diameters.
• AP & EP Series are completely intermatable.
Simple steps to guide you in
using this catalogue
1) Identify the product group listed in
Contents on Page 1 and go directly to that
page number.
2) Each product group cover page then details
information and options available.
3) Refer to the product detail pages and identify
the product you require pictorially.
4) Read the product description column for the
products standard features.
5) Use variations column to determine
your choice.
6) Identify part number.
7) In the event the particular option you require
is not listed please refer to the part number
breakdown page at the end of each section.
8) Please contact us directly if you have any
further problems.
EP / AP SERIES HIGH POWER CONNECTORS
53
54
EP SERIES HIGH POWER CONNECTORS
METAL TYPE - SOLDER
ENTERTAINMENT INTERCONNECT CATALOGUE - Amphenol Australia Pty Ltd Telephone 61 3 8796 8888 Fax 61 3 8796 8801 www.amphenol.com.au
PRODUCT - FIGURE DRAWING Dimensions in mm (inches) DESCRIPTION VARIATIONS PART NUMBER
3 pole nickel finish EP-3-12
3 pole black finish EP-3-12B
4 pole nickel finish EP-4-12
4 pole black finish EP-4-12B
5 pole nickel finish EP-5-12
5 pole black finish EP-5-12B
6 pole nickel finish EP-6-12
6 pole black finish EP-6-12B
8 pole nickel finish EP-8-12
8 pole black finish EP-8-12B
3 pole nickel finish EP-3-11P
3 pole black finish EP-3-11PB
4 pole nickel finish EP-4-11P
4 pole black finish EP-4-11PB
5 pole nickel finish EP-5-11P
5 pole black finish EP-5-11PB
6 pole nickel finish EP-6-11P
6 pole black finish EP-6-11PB
8 pole nickel finish EP-8-11P
8 pole black finish EP-8-11PB
EP Male cable
connector,
Machined contacts,
Metal Shell
The EP Series has set the standard in high per for mance speaker
connectors. Apart from its durability and strength, it offers consistent
superior power handling capabilities.
Features:
• Solder Bucket connections.
• Precision machined contacts.
• Diecast Metal Housings
• High current contacts
• Male and female cable and chassis connectors available.
• EP Cable Connectors are supplied with two different boots for
different cable diameters.
Options: Black Finish Shell. Specifications: Page 57-58
Panel Cutouts: Page 58
ISO ASSEMBLY OF
EP MALE
EP Female cable
connector,
Machined contacts,
Metal Shell
ISO ASSEMBLY OF
EP FEMALE
3 pole nickel finish EP-3-14
3 pole black finish EP-3-14B
4 pole nickel finish EP-4-14
4 pole black finish EP-4-14B
5 pole nickel finish EP-5-14
5 pole black finish EP-5-14B
6 pole nickel finish EP-6-14
6 pole black finish EP-6-14B
8 pole nickel finish EP-8-14
8 pole black finish EP-8-14B
3 pole nickel finish EP-3-13P
3 pole black finish EP-3-13PB
4 pole nickel finish EP-4-13P
4 pole black finish EP-4-13PB
5 pole nickel finish EP-5-13P
5 pole black finish EP-5-13PB
6 pole nickel finish EP-6-13P
6 pole black finish EP-6-13PB
8 pole nickel finish EP-8-13PT
8 pole black finish EP-8-13PBT
EP SERIES HIGH POWER CONNECTORS
METAL TYPE - SOLDER
55
ENTERTAINMENT INTERCONNECT CATALOGUE - Amphenol Australia Pty Ltd Telephone 61 3 8796 8888 Fax 61 3 8796 8801 www.amphenol.com.au
PRODUCT - FIGURE DRAWING Dimensions in mm (inches) DESCRIPTION VARIATIONS PART NUMBER
EP Male chassis
mount,
Round Flange,
Machined contacts,
Metal Shell
EP Female chassis
mount,
Round Flange,
Machined contacts,
Metal Shell
EP Female chassis
mount,
Round Flange,
Stamped contacts,
Metal Shell
8 pole nickel finish EP-8-13P
8 pole black finish EP-8-13PB
AP SERIES HIGH POWER CONNECTORS
THERMOPLASTIC TYPE - SOLDER
ENTERTAINMENT INTERCONNECT CATALOGUE - Amphenol Australia Pty Ltd Telephone 61 3 8796 8888 Fax 61 3 8796 8801 www.amphenol.com.au
PRODUCT - FIGURE DRAWING Dimensions in mm (inches) DESCRIPTION VARIATIONS PART NUMBER
4 pole AP-4-12
5 pole AP-5-12
6 pole AP-6-12
8 pole AP-8-12
4 pole AP-4-11
5 pole AP-5-11
6 pole AP-6-11
8 pole AP-8-11
4 pole AP-4-14
5 pole AP-5-14
6 pole AP-6-14
8 pole AP-8-14
4 pole AP-4-13
5 pole AP-5-13
6 pole AP-6-13
8 pole AP-8-13
4 pole AP-4-22
5 pole AP-5-22
6 pole AP-6-22
8 pole AP-8-22
4 pole AP-4-21
5 pole AP-5-21
6 pole AP-6-21
8 pole AP-8-21
AP Male cable
connector,
Machined contacts,
Thermoplastic Black
shell.
AP Female cable
connector,
Machined contacts,
Thermoplastic Black
shell.
AP Male chassis
mount,
Round Flange,
Machined contacts,
Thermoplastic Black
shell.
AP Female chassis
mount,
Round Flange,
Machined contacts,
Thermoplastic Black
shell.
AP Male chassis
mount,
Rectangular Flange,
Machined contacts,
Thermoplastic Black
shell.
AP Female chassis
mount,
Rectangular Flange,
Machined contacts,
Thermoplastic Black
shell.
The AP Series provides the same power handling per for mance as the
EP Series in a cost effective, yet durable Thermoplastic housing.
Features:
• Solder Bucket connections.
• Precision machined contacts.
• Thermoplastic Housings
• High current contacts
• Male & Female Cable and Chassis connectors available.
Specifications: Page 57-58
Panel Cutouts: Page 58
56
VALUE
EP / AP SERIES HIGH POWER CONNECTORS
STANDARD DATA
57
ENTERTAINMENT INTERCONNECT CATALOGUE - Amphenol Australia Pty Ltd Telephone 61 3 8796 8888 Fax 61 3 8796 8801 www.amphenol.com.au
STANDARD DATA EP/AP
Number of contacts
Contact Arrangements
(Front view of pin inser t)
34568
GENERAL
CHARACTERISTICS
Wire Gauge - Stranded wire: 12AWG 12AWG 12AWG 12AWG 14AWG
Termination
UL94V-0Flammability
Complies with RoHS Directive 2002/95/ECEnvironmental
SOLDER
1300V
100V
15A
1)
MECHANICAL
CHARACTERISTICS
Ser vice Voltage RMS
Test Voltage AC RMS
ELECTRICAL
CHARACTERISTICS 2400V 3000V 1600V 1600V
460V 660V 200V 200V
CLIMATIC
CHARACTERISTICS
1)
Insulation Resistance ≥1000MΩ
Typicial Contact Resistance ≤3mΩ
Mechanical operations
Current car r ying capacity 20A 20A 20A 20A
Weight - EP 11 & 12 80g 84g 86g 86g
(0.176lb) (0.185lb) (0.189lb) (0.189lb)
Weight - EP 13 & 14 48g 50g 54g 54g
(0.105lb) (0.110lb) (0.119lb) (0.119lb)
Weight - AP 11 & 12 N/A 42g 44g 44g
(0.092lb) (0.097lb) (0.097lb)
Weight - AP 13, 14, 21 & 22 N/A 26g 30g 30g
(0.057lb) (0.066lb) (0.066lb)
1000 mating cycles
Typical Cable retention force 22Kg to 44Kg (50lb to 100lb) - Dependant on cable material and diameter
Protection Class
Operating Temperature
IP40
-25˚C to +75˚C (-13°F to +167°F)
Not suitable for domestic applications above 50V
Approximate weight only, does not include packaging. Please contact us for exact weight for shipping purposes.
2)
2)
2)
2)
Rev 2 - 09/2005
2)
58
EP / AP SERIES HIGH POWER CONNECTORS
STANDARD DATA
DETAILS
STANDARD DATA EP/AP (CONT’D)
ENTERTAINMENT INTERCONNECT CATALOGUE - Amphenol Australia Pty Ltd Telephone 61 3 8796 8888 Fax 61 3 8796 8801 www.amphenol.com.au
TYPE AP EP
MATERIALS
Cable OD Range
Retention Method Two opposing plastic screws Metal saddle clamp
11mm to 17mm 9mm to 16mm
(0.43” to 0.67”) (0.35” to 0.63”)
CLAMPING
CHARACTERISTICS
Material / Plating Brass / Bright Tin
Male contact Machined - Solder
Material / Plating Brass / Bright Tin
Female contact Machined - Solder
Insulators UL94V-0 PBT Resin
Silicon Rubber UL94 HB Thermoplastic ElastomerCable Bushing
Shell finish
Connector shell
Black
Modified PPE Resin
Satin Nickel or Black
Diecast Zinc Alloy
EP/AP SERIES PANEL CUTOUT DATA - FRONT VIEW
EP 13/AP 13/AP 21 EP 14/AP 14/AP 22
