Panasonic Electronic Components
http://www.panasonic.com/rfmodules
1-800-344-2112
8
SNAP®
PAN4555
Product Performance:
The PAN4555 module is a short range, low power, 2.4 GHz ISM band
transceiver. It includes a complete 802.15.4 physical layer (PHY)
modem. It is designed for the IEEE 802.15.4 wireless standard and
microcontroller (MCU). The module also has a reference oscillator
which provides a cost effective solution for short-range data links
and networks. Several fi rmware options are available, modules
can be confi gured from simple point-to-point proprietary devices
to complex mesh networks. Optional Synapse SNAP fi rmware
provides a highly fl exible, industry leading solution for mesh
networking with a complete network development environment.
This module complies with EN300328, FCC CFR Part 15 and ARIB
STD-T66 standards.
• Very Small Size: 12.2mm X 16.4mm X 2.2mm (200mm2)
• 2 Antenna Options: Single Port 50o Or Ceramic Antenna
• 16 Selectable Channels With 250 Kbps In The 2.4 GHz Band
• Low Power Modes For Increased Battery Life
• High Sensitivity Of -92 dBm Typical At 1% Packet Error Rate
• 0 dBm Typical Output Power Programmable Over A 30 dB Range
• Low Supply Voltage: 2.0 V To 3.4 V, 2.7 V Typical
• Operating Temperature Range: -40°C To +85°C
• Link Quality And Clear Channel Assessment Capability
• 60k Flash And 4k RAM Memory
• 4 Channel A/d Converter With 10 Bit Adc For Fast And Easy Conversion From Analog Inputs
(Temperature, Pressure And Fluid Levels) To Digital Values.
• 3 Channel 16 Bit Timer/Pulse Width Modulation (Tpm) Outputs
• BDM Port For Direct Download Programming
• In Total 20 Digital I/O Lines With Programmable Pull-ups And Few With High-current Driver
• FCC, IC, & ETSI Approved
• Remote Control And Wire Replacement In Industrial Systems Such As Wireless Sensor Networks
• Factory / Home Automation And Motor / Lighting Control
• Inventory Management And RFID Tagging
• Automated Meter Reading
• Monitoring (Environmental, Patient or Fitness)
Applications:
Part Numbers:
Part Number Description
ENWC9A08A3EF Ceramic Antenna
ENWC9A09N4EF RF Out On SMD Pads
ENWC9A08A2EF Ceramic Antenna, AT Command Set, coordinator
ENWC9A09C2EF RF Out on SMD Pads, AT Command Set, coordinator
ENWC9A08A2EF Ceramic Antenna, AT Command Set, Node
ENWC9A09C2EF RF Out on SMD Pads AT Command Set
ENWC9A08A4EF Ceramic Antenna, SNAP
ENWC9A09C4EF RF Out on SMD Pads, SNAP
EVAL_PAN4555 Evaluation Kit For The PAN4555 Module
9Panasonic Electronic Components
http://www.panasonic.com/rfmodules
1-800-344-2112
SNAP®PAN4555
Dimensions & Pin Layout:
$QWHQQD
PP
PP
+HLJKW
PP
7RS9LHZ
Note:
The pin names of the module and the internal
MC1321x fit to each other.
Pin no. Pin name
1, 9, 17,
25, 31 GND
2 to 4 PTB0 to 2
5PTB7
6 VREFH
7PTA7
8PTA5
10 PTA6
11 PTG0/BKGD
12 to 13 PTG1 to 2
14 CLKO
15 to 16 PTC0 to 1
Pin no. Pin name
18 PTC5
19 PTC3
20 PTC2
21 to 22 PTE0 to 1
23 VDDA
24 VCC
26 VCC
27 RESET
28 PTD6
29 PTD4
30 PTD2
32 EXTANT
Notes:
All parameters sre valid for Vdd = 2.7V And Tamb = 25°C.
Freescale‘s MC13213 is used in the module. SMAC, MAC Or Freescale Bee-stack.
Mode defi nitions and transition times for saving battery life can be seen in the data sheet MC1321X.
The derivative MC13212 and MC13211 are available on request.
Parameter Value Condition / Notes
Receiver Sensitivity -92 dBm typical For 1% packet error rate
Output Power 0 dBm Maximum
Power Supply 2.0 V to 3.4 V Single supply, 2.7 V typical
Power Control Range 30 dB
Maximum Data Rate 250 kbps Over The Air
Current Consumption
Receive Mode
Transmit Mode
Idle Mode
Doze Mode
Hibernate Mode
Off Mode
37 mA typ.
30 mA typ.
500 uA typ.
35 uA typ.
1 uA typ.
<1 uA typ.
Output power nominal value
No CLKO
Operating Temperature Range -40°C to +85°C
Note: The pin names of the module and the internal
MC13213 are equivalent.
Technical Specifi cations:
Pin No. Pin Name Pin No. Pin Name
