https://www.phoenixcontact.com/us/products/2800739
09/10/2014Page2/4
Type 2 surge protection plug-VAL-US 120 ST-2800739
Technical data
General
IEC test classification II
T2
EN type T2
SPD design Voltage-limiting type
Mode of protection L-PEN
L-N
Mounting type On base element
Color black
Housing material PA 6.6
Pollution degree 2
Inflammability class according to UL 94 V-0
Type Male
Number of positions 1
Arrester can be tested with CHECKMASTER from software version: From SW rev. 1.10
Surge protection fault message Optical
Protective circuit
Nominal voltage UN120/208 V AC (TN)
Nominal frequency fN60 Hz (50 Hz)
Maximum continuous operating voltage UC175 V AC
Residual current IPE ≤ 0.45 mA
Standby power consumption PC≤ 80 mVA
Nominal discharge current In (8/20) µs 20 kA
Maximum discharge current Imax (8/20) µs 40 kA
Short-circuit current rating ISCCR 25 kA
Voltage protection level Up≤ 0.9 kV
Residual voltage Ures ≤ 0.9 kV (at In)
≤ 0.75 kV (at 10 kA)
≤ 0.6 kV (at 5 kA)
≤ 0.55 kV (at 3 kA)
TOV behavior at UT208 V AC (5 s / withstand mode)
240 V AC (120 min / safe failure mode)
Response time tA≤ 25 ns
Max. backup fuse with branch wiring 125 A AC (gG)
Connection data
Connection method VALVETRAB plug-in system