For further information contact your local STMicroelectronics sales office.
September 2015 DocID028152 Rev 1 1/4
STM32469I-EVAL
Evaluation board with STM32F469NI MCU
Data brief
Features
STM32F469NIH6 microcontroller with
2 Mbytes of Flash memory and 324 Kbytes of
RAM in TFBGA package
six 5 V power supply options:
– power jack
– ST-LINK/V2-1 USB connector
– user USB HS connector
– user USB FS1 connector
– user USB FS2 connector
– daughterboard
SAI Audio DAC
stereo audio jack which supports headset with
microphone
stereo digital microphone
audio jack connector used to connect external
speakers
2-Gbyte (or more) SDMMC interface microSD
card
RF-EEPROM on I2C compatible serial
interface
RS232 communication
IrDA transceiver
JTAG/SWD and ETM trace debug support
embedded ST-LINK/V2-1
IEEE-802.3-2002 compliant Ethernet
connector
camera module
8Mx32 bit SDRAM, 1Mx16 bit SRAM and
8Mx16 bit NOR Flash
512-Mbit Quad-SPI NOR Flash
4-inch 800x480 pixel TFT color LCD with MIPI
DSI interface and capacitive touch panel
joystick with 4-direction control and selector
reset, WakeUp/Tamper or key button
4 color user LEDs
extension connectors and memory connectors
for daughterboard or wrapping board
USB OTG HS and FS with Micro-AB
connectors
1. Picture not contractual
RTC with backup battery
CAN2.0A/B compliant connection
potentiometer
motor control connector
www.st.com
Description DB2645
2/4 DocID028152 Rev 1
1 Description
The STM32469I-EVAL evaluation board is a complete demonstration and development
platform for STMicroelectronics ARM® Cortex® -M4 core-based STM32F469NIH6
microcontroller. It features three I2C interfaces, six SPIs with two multiplexed full-duplex I2S
interfaces, SDMMC, four USARTs, two CANs, three 12-bit ADCs, two 12-bit DACs, one SAI,
8 to 14-bit digital camera module interface, internal 320+4 Kbytes of SRAM and 2 Mbytes of
Flash memory, USB HS OTG and USB FS OTG, rnet MAC, FMC interface, MIPI DSI
interface, Quad-SPI interface, JTAG and ETM debugging support. This evaluation board
can be used as a reference design for user application development but it is not considered
as a final application.
The full range of hardware features on the board helps the user to evaluate all peripherals
(USB OTG HS, USB OTG FS, Ethernet, motor control, CAN, microSD Card, USART, Audio
DAC and ADC, digital microphone, IrDA, RF-EEPROM, SRAM, NOR Flash, SDRAM, Quad-
SPI Flash, 4" TFT LCD with MIPI DSI interface and capacitive touch panel and others) and
to develop his own applications. Extension headers make it possible to easily connect a
daughterboard for specific application.
The integrated ST-LINK/V2-1 provides an embedded in-circuit debugger and programmer
for the STM32 MCU.
2 Ordering information
To order the evaluation boards based on the STM32F469NI MCU, use the order code:
STM32469I-EVAL.
DocID028152 Rev 1 3/4
DB2645 Revision history
4
3 Revision history
Table 1. Document revision history
Date Revision Changes
07-Sep-2015 1 Initial release.
DB2645
4/4 DocID028152 Rev 1
IMPORTANT NOTICE – PLEASE READ CAREFULLY
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and
improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on
ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order
acknowledgement.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or
the design of Purchasers’ products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.
© 2015 STMicroelectronics – All rights reserved
