SPECIFICATION CONTROL DRAWING 7528A1317 CHEMINAX 75 OHM, AWG 28, 7 STRANDS OF AWG 36, Date: 3-29-00 COAXIAL CABLE Revision: E THIS SPECIFICATION SHEET FORMS A PART OF THELATEST ISSUE OF RAYCHEM SPECIFICATION 1200. CONSTRUCTION DETAILS DIMENSIONS ARE NOMINAL VALUES IN INCHES UNLESS OTHERWISE DESIGNATED. CONDUCTOR AWG 28, 7 Strands of AWG 36, Tin-Coated Copper Covered Steel 0155 -> DIELECTRIC Rayfoam@L Color - Natural SHIELD AWG 38, Tin-Coated Copper 082 hKYN 402 JACKET (nominal) Thermorad 110 (maximum) a, Outer jacket color will be black (designated by a O" appended to the part number, e.g., 7528A1317-0) unless otherwise specified. Designate outer jacket color with a dash number in accordance with MIL-STD-681. ELECTRICAL CHARACTERISTICS CHARACTERISTIC IMPEDANCE 75 + 3 ohms, Method B CAPACITANCE 17.6 pF/it. (nominal) VELOCITY OF PROPAGATION 77% (nominal) ADDITIONAL REQUIREMENTS Raychem ELECTRICAL CONDUCTOR RESISTANCE 162. ohms/1000 ft. (nominal) INSULATION RESISTANCE 10,000 megohms (minimum) for 1000 ft. JACKET FLAWS SPARK TEST 1.0 kV (rms), 60 Hz IMPULSE TEST 6.0 kV (peak) VOLTAGE WITHSTAND (DIELECTRIC) 1000 volts (rms), (minimum) ENVIRONMENTAL AGING STABILITY 135C/-55C/2.75 inch mandrel FLAMMABILITY Method C HEAT SHOCK 225C LOW TEMPERATURE- -55C/2.75 inch mandrel COLD BEND VOLTAGE WITHSTAND (POST ENVIRONMENTAL) 1000 voits (rms), for 1 minute PHYSICAL INSULATION (DIELECTRIC) ELONGATION 50% (minimum) TENSILE STRENGTH 800 Ibf/in? (minimum) JACKET ELONGATION 250% (minimum) TENSILE STRENGTH 2000 ibf/in? (minimum) JACKET THICKNESS .010 inch (nominal) SHIELD COVERAGE 90% (minimum) WEIGHT 6.9 Ibs/1000 ft. (nominal) 300 Constitution Drive THIS SPECIFICATION SHEET TAKES PRECEDENCE Menlo Park, California 94025 OVER DOCUMENTS REFERENCED HEREIN. REFER- 1-800-2 Raychem FAX: 1-415-361-6297 ENCE DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID.