SURFACE MOUNT DISPLAY Part Number: ACSA08-51SGWA Super Bright Green Features Description z 0.8 inch digit height. The Super Bright Green source color devices are made with z Low current operation. Gallium Phosphide Green Light Emitting Diode. z Excellent character appearance. z Mechanically rugged. z Gray face, white segment. z Package: 200pcs/ reel z Moisture sensitivity level : level 2a. z RoHS compliant. Package Dimensions& Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is 0.25(0.01")unless otherwise noted. 2. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 3. The gap between the reflector and PCB shall not exceed 0.25mm. SPEC NO: DSAH3712 REV NO: V.4 DATE: MAR/22/2011 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: J.Yu ERP: 1351000569 Selection Guide Part No. Dice ACSA08-51SGWA Iv (ucd) [1] @ 10mA Lens Type Super Bright Green (GaP) White Diffused Min. Typ. 3600 7400 Description Common Anode, Rt. Hand Decimal. Note: 1. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength Super Bright Green D [1] Dominant Wavelength 1/2 Max. Units Test Conditions 565 nm IF=20mA Super Bright Green 568 nm IF=20mA Spectral Line Half-width Super Bright Green 30 nm IF=20mA C Capacitance Super Bright Green 15 pF VF=0V;f=1MHz VF [2] Forward Voltage Super Bright Green 2.2 2.5 V IF=20mA IR Reverse Current Super Bright Green 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25C Parameter Super Bright Green Units 62.5 mW DC Forward Current 25 mA Peak Forward Current [1] 140 mA 5 V Power dissipation Reverse Voltage Operating / Storage Temperature -40C To +85C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAH3712 REV NO: V.4 DATE: MAR/22/2011 PAGE: 2 OF 5 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: J.Yu ERP: 1351000569 Super Bright Green ACSA08-51SGWA SPEC NO: DSAH3712 REV NO: V.4 DATE: MAR/22/2011 PAGE: 3 OF 5 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: J.Yu ERP: 1351000569 ACSA08-51SGWA Recommended Soldering Pattern (Units : mm; Tolerance: 0.15) Reel Dimension Tape Specifications (Units : mm) SPEC NO: DSAH3712 REV NO: V.4 DATE: MAR/22/2011 PAGE: 4 OF 5 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: J.Yu ERP: 1351000569 PACKING & LABEL SPECIFICATIONS ACSA08-51SGWA SPEC NO: DSAH3712 REV NO: V.4 DATE: MAR/22/2011 PAGE: 5 OF 5 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: J.Yu ERP: 1351000569