TTDS-017 – D-SCE TECHNICAL DATA SHEET
PAGE 1 CLASS 1 DATA CLASSIFICATION - SEE POLICY TEC-02-04
Fluid Resistant, Heat Shrink Identification Marker Sleeving for the identification of wires
and cables.
D-SCE is the foremost fluid resistant product used in applications where exposure to lubricant and fuel
spray is possible.
D-SCE is a thin wall, heat shrink tube, manufactured with e-beam technology that gives users the ability to
shrink the supplied tube with no damage to material or printed text. Shrinking the tube will ensure the
printed mark has a firm hold on the wire.
D-SCE gives market leading print performance when used as a complete system, as recommended by TE
Connectivity. Refer to TE document 411-121005 IDENTIFICATION PRINTER PRODUCT RIBBON
MATRIX for the recommended printer/product/ribbon combinations.
Printed sleeves meet the rail specifications NF F 00608 Categories A & H and BS EN50343. The sleeve
also meets the material requirements of SAE-AMS-DTL-23053/6 Class 1.
D-SCE Heat Shrink Identification Marker Sleeving is available as part of a complete identification system.
The system comprises specific printers, thermal transfer ribbons and WINTOTAL software
D-SCE
Diesel Resistant
HEAT SHRINK IDENTIFICATION SYSTEM
Technical Datasheet
TTDS-017 Revision 7 - October 2016
TTDS-017 – D-SCE TECHNICAL DATA SHEET
PAGE 2 CLASS 1 DATA CLASSIFICATION - SEE POLICY TEC-02-04
Where possible, TE have tested product as a finished item, including the print. Operational tests are followed by an
assessment of mark adherence to validate fit form and function. Further details can be found in TE standard RW-2519
D-SCE DIESEL RESISTANT
• Self-extinguishing, non-flame propagating
• Resistant to key rail, industrial and military fluids
(defined by RW-2519)
• Designed for rugged environments
• Military grade performance
• Pre-termination Cable Identification
• Sleeve diameters from 2.4mm to 38.1mm
• Shrink ratio 3:1 (38.1mm 2:1)
Features
Specifications / Approvals
TE Connectivity Standard RW-2519 D-SCE and D-SCE-FLAT Heat Shrink Marker Sleeves
Rail Standards EN45545-2, Railway applications - Fire protection on railway vehicles, Part 2: Require-
ments for fire behaviour of materials and components
Fire Hazard Classification 1, 2 and 3, in accordance with requirement set R24
NF F 00608 General Railway Equipment, Heat Shrinkable Marker Sleeves and Tubes
Classification Type H and Type A
NFPA 130 Standard for Fixed Guideway Transit and Passenger Rail Systems,
Fire protection requirements, Interior Fire Propagation Resistance
Military SAE-AMS-23053/6 Insulation Sleeving, Electrical, Heat Shrinkable, Polyolefin, Semi-
Rigid, Crosslinked, Class 1.
SHAZAINENNSHI, Japan Railway Rolling Stock & Machinery Association 2003
Classification ‘Flame Retardant’ Serial Number 2015-164K
Federal Railroad Administration, DOT, Appendix B to Part 238, Test Methods and Per-
formance Criteria for the Flammability and Smoke Emission Characteristics of Materials
Temperature Rating
Applications
Design for Environment
• Operating Temperature Range –75°C to 135°C (-103°F to 275°F)
• D-SCE fully complies with 2011/65/EU RoHS II
directive, and Regulation (EC) number 1907/2006
(REACH)
Further information and a downloadable declaration cov-
ering RoHS and REACH compliance can be found at the
TE Product Compliance Support Centre:
http://www.te.com/usa-en/utilities/product-
compliance.html
Print Performance
• MIL 202 Method 215, Resistance to Solvents
• SAE AS 5942, Marking of Electrical Insulating Materials, Adherence
• EN 50343 Rolling Stock Applications - Rolling Stock Rules for Installation of Cabling, Marking for Identification
TTDS-017 – D-SCE TECHNICAL DATA SHEET
PAGE 3 CLASS 1 DATA CLASSIFICATION - SEE POLICY TEC-02-04
Specify product name, pack size, sleeve size, sleeve length, pre-score (leave
blank if not required) and colour
Ordering Example: D-SCE-1K-1/4-50-9
Ordering Information
D-SCE
Diesel Resistant
Part Description
D-SCE -4.8 -50 -S1 -9
9 Colour
S1 Scoring (Optional)
50 Sleeve Length (mm)
4.8 Expanded Inside Diameter
1K Pack Size
D-SCE Product Family
-1K
Available Options
D-SCE is side scored as standard
Pre-scoring Perforated score to produce multiple marker sleeves from each
D-SCE sleeve
1 Pre-score Code S1
2 Pre-scores Code S2
Packaging sizes
<blank> 250 piece packs available for all sizes
1K 1000 piece reels available for all sizes up
to 25.4
2.5K 2500 piece reels available for sizes
4.8 up to 25.4
5K 5000 piece reels available for sizes
2.4 and 3.2
Colours Standard Yellow White
Code 4 9
Non Standard Blue Pink
Code 6 2L
Inside diameter Recommended cable diameter use
range
As supplied
(minimum)
After recovery
(Maximum)
mm inches mm inches mm inches
D-SCE - <pack size> - 2.4 - 50 - <score> - <colour> 2.4 0.094 0.8 0.03 0.81 to 1.9 0.031 to 0.075
D-SCE - <pack size> - 3.2 - 50 - <score> - <colour> 3.2 0.125 1.1 0.04 1.11 to 2.66 0.044 to 0.105
D-SCE - <pack size> - 4.8 - 50 - <score> - <colour> 4.8 0.189 1.6 0.06 1.75 to 4.06 0.069 to 0.160
D-SCE - <pack size> - 6.4 - 50 - <score> - <colour> 6.4 0.250 2.1 0.08 2.31 to 5.46 0.091 to 0.215
D-SCE - <pack size> - 9.5 - 50 - <score> - <colour> 9.5 0.375 3.2 0.13 3.47 to 8.12 0.137 to 0.320
D-SCE - <pack size> - 12.7 - 50 - <score> - <colour> 12.7 0.500 4.2 0.17 4.64 to 10.79 0.183 to 0.425
D-SCE - <pack size> - 19.0 - 50 - <score> - <colour> 19.1 0.750 6.4 0.25 6.99 to 16.25 0.275 to 0.640
D-SCE - <pack size> - 25.4 - 50 - <score> - <colour> 25.4 1.000 8.5 0.33 9.29 to 21.59 0.366 to 0.850
D-SCE - 38.1 - 50 - <score> - <colour> 38.1 1.500 19.1 0.75 20.95 to 33.02 0.825 to 1.300
Ordering description
Dimensions in mm (inches)
TTDS-017 – D-SCE TECHNICAL DATA SHEET
PAGE 4 CLASS 1 DATA CLASSIFICATION - SEE POLICY TEC-02-04
www.te.com/rail
TE Connectivity, TE Connectivity (logo) and Every Connection Counts are trademarks. All other logos, products and/or company names referred to herein might be trademarks
of their respective owners.
The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, TE Connec-
tivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligations shall only be as set forth in TE
Connectivity‘s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising
out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for
the specific application.
© 2016 TE Connectivity Ltd. family of companies All Rights Reserved.
Software
Print quality and print performance can only be
guaranteed when specific TE printer and ribbons are
used.
The current list of printers and ribbons can be found in TE
document 411-121005 ‘Identification Printer Product Rib-
bon Matrix’. This document can be found in ‘Access Our
Tools’:
http://www.te.com/usa-en/utilities/access-product-tools-
and-resources.html
Printer Information
D-SCE
Diesel Resistant
WINTOTAL software, available to download for a 14 day
evaluation period from the Identification Printer Software
page:
http://www.te.com/usa-en/products/identification-labeling/
printers-software.html
Contact a TE representative for further information
