Revised April 1999 74VHC244 Octal Buffer/Line Driver with 3-STATE Outputs General Description The VHC244 is an advanced high speed CMOS octal bus buffer fabricated with silicon gate CMOS technology. It achieves high speed operation similar to equivalent Bipolar Schottky TTL while maintaining the CMOS low power dissipation. The VHC244 is a non-inverting 3-STATE buffer having two active-LOW output enables. These devices are designed to be used as 3-STATE memory address drivers, clock drivers, and bus oriented transmitter/receivers. An input protection circuit ensures that 0V to 7V can be applied to the input pins without regard to the supply voltage. This device can be used to interface 5V to 3V systems and two supply systems such as battery back up. This cir- cuit prevents device destruction due to mismatched supply and input voltages. Features High Speed: tPD = 3.9ns (typ) at VCC = 5V High noise immunity: VNIH = VNIL = 28% VCC (min) Power down protection is provided on all inputs Low noise: VOLP = 0.6V (typ) Low power dissipation: ICC = 4 A (max) @ TA = 25C Pin and function compatible with 74HC244 Ordering Code: Order Number Package Number 74VHC244M 74VHC244SJ 74VHC244MTC 74VHC244N M20B M20D MTC20 N20A Package Description 20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300" Wide 20-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide 20-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide 20-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide Surface mount packages are also available on Tape and Reel. Specify by appending the suffix letter "X" to the ordering code. Logic Symbol Connection Diagram IEEE/IEC Pin Descriptions Pin Names Description OE1, OE2 3-STATE Output Enable Inputs I0-I7 Inputs O0-O7 3-STATE Outputs (c) 1999 Fairchild Semiconductor Corporation DS011522.prf www.fairchildsemi.com 74VHC244 Octal Buffer/Line Driver with 3-STATE Outputs November 1992 74VHC244 Truth Tables Inputs OE1 Outputs In (Pins 12, 14, 16, 18) L L L L H H H X Z In (Pins 3, 5, 7, 9) Inputs OE2 Outputs L L L L H H H X Z H = HIGH Voltage Level L = LOW Voltage Level I = Immaterial Z = High Impedance www.fairchildsemi.com 2 Supply Voltage (VCC) -0.5V to +7.0V DC Input Voltage (VIN) -0.5V to +7.0V Recommended Operating Conditions (Note 2) -0.5V to VCC + 0.5V DC Output Voltage (VOUT) Supply Voltage (VCC) 2.0V to 5.5V Input Voltage (VIN) 0V to +5.5V Input Diode Current (IIK) -20 mA Output Voltage (VOUT) Output Diode Current (IOK) 20 mA Operating Temperature (TOPR) DC Output Current (IOUT) 25 mA Input Rise and Fall Time (tr, tf) DC VCC /GND Current (ICC ) 75 mA VCC = 3.3V 0.3V 0 ns/V 100 ns/V -65C to +150C VCC = 5.0V 0.5V 0 ns/V 20 ns/V Storage Temperature (TSTG) Lead Temperature (TL) (Soldering, 10 seconds) 0V to VCC -40C to +85C Note 1: Absolute Maximum Ratings are values beyond which the device may be damaged or have its useful life impaired. The databook specifications should be met, without exception, to ensure that the system design is reliable over its power supply, temperature, and output/input loading variables. Fairchild does not recommend operation outside databook specifications. 260C Note 2: Unused inputs must be held HIGH or LOW. They may not float. DC Electrical Characteristics Symbol VIH HIGH Level Input Voltage VIL VOL IOZ TA = 25C Min TA = -40C to +85C Typ Max Min 2.0 1.5 1.5 3.0 - 5.5 0.7 VCC 0.7 VCC LOW Level Input Voltage VOH VCC (V) Parameter Max 2.0 0.5 0.5 0.3 VCC 0.3 VCC HIGH Level 2.0 1.9 2.0 1.9 3.0 2.9 3.0 2.9 4.5 4.4 4.5 4.4 3.0 2.58 2.48 4.5 3.94 3.80 Conditions V 3.0 - 5.5 Output Voltage Units V VIN = VIH IOH = -50 A V or VIL IOH = -4 mA V IOH = -8 mA VIN = VIH IOL = 50 A LOW Level 2.0 0.0 0.1 0.1 Output Voltage 3.0 0.0 0.1 0.1 4.5 0.0 0.1 0.1 3.0 0.36 0.44 4.5 0.36 0.44 5.5 0.25 2.5 A VIN = VIH or VIL 0 - 5.5 0.1 1.0 A VIN = 5.5V or GND 5.5 4.0 40.0 A VIN = VCC or GND 3-STATE Output V V Input Leakage Current ICC Quiescent Supply Current IOL = 4 mA IOL = 8 mA VOUT = VCC or GND Off-State Current IIN or VIL Noise Characteristics Symbol Parameter VOLP Quiet Output Maximum (Note 3) Dynamic VOL VOLV Quiet Output Minimum (Note 3) Dynamic VOL VIHD Minimum HIGH Level (Note 3) Dynamic Input Voltage VILD Maximum HIGH Level (Note 3) Dynamic Input Voltage TA = 25C VCC (V) Typ Limits 5.0 0.6 0.9 V CL = 50 pF 5.0 -0.6 -0.9 V CL = 50 pF 5.0 3.5 V CL = 50 pF 5.0 1.5 V CL = 50 pF Units Conditions Note 3: Parameter guaranteed by design. 3 www.fairchildsemi.com 74VHC244 Absolute Maximum Ratings(Note 1) 74VHC244 AC Electrical Characteristics Symbol Parameter tPLH Propagation Delay tPHL Time tPZL 3-STATE Output tPZH Enable Time VCC (V) TA = 25C TA = -40C to +85C Typ Max Min Max 5.8 8.4 1.0 10.0 8.3 11.9 1.0 13.5 5.0 0.5 3.9 5.5 1.0 6.5 5.4 7.5 1.0 8.5 3.3 0.3 6.6 10.6 1.0 12.5 9.1 14.1 1.0 16.0 4.7 7.3 1.0 8.5 3.3 0.3 5.0 0.5 Min Units Conditions CL = 15 pF ns CL = 50 pF CL = 15 pF ns ns CL = 50 pF RL = 1 k CL = 15 pF CL = 50 pF CL = 15 pF ns CL = 50 pF 6.2 9.3 1.0 10.5 3.3 0.3 10.3 14.0 1.0 16.0 Disable Time 5.0 0.5 6.7 9.2 1.0 10.5 Output to Output 3.3 0.3 1.5 1.5 tOSHL Skew 5.0 0.5 1.0 1.0 CIN Input Capacitance 4 10 10 pF VCC = Open COUT Output Capacitance 6 pF VCC = 5.0V CPD Power Dissipation Capacitance 19 pF (Note 5) tPLZ 3-STATE Output tPHZ tOSLH ns ns RL = 1 k CL = 50 pF CL = 50 pF (Note 4) CL = 50 pF CL = 50 pF Note 4: Parameter guaranteed by design. tOSLH = |tPLHmax - tPLHmin|; tOSHL = |tPHLmax - tPHLmin|. Note 5: CPD is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load. Average operating current can be obtained by the equation: ICC (OPR.) = CPD * VCC * fIN + I CC/8 (per bit). www.fairchildsemi.com 4 74VHC244 Physical Dimensions inches (millimeters) unless otherwise noted 20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300" Wide Package Number M20B 20-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide Package Number M20D 5 www.fairchildsemi.com 74VHC244 Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 20-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Package Number MTC20 www.fairchildsemi.com 6 20-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide Package Number N20A LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support 1. Life support devices or systems are devices or systems device or system whose failure to perform can be reawhich, (a) are intended for surgical implant into the sonably expected to cause the failure of the life support body, or (b) support or sustain life, and (c) whose failure device or system, or to affect its safety or effectiveness. to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the www.fairchildsemi.com user. Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. 74VHC244 Octal Buffer/Line Driver with 3-STATE Outputs Physical Dimensions inches (millimeters) unless otherwise noted (Continued)