Motorized Programmable Force Test Stands S h i mpo Instr ument ' s advanced M otori ze d, Pr ogr a mmabl e F o rce Test Stan d s c om bine d with our line of top quality force gauges, provide a complete force measurement system capable of handling the most precise testing applications. Their all steel construction makes them remarkably rugged while performing with precision. Programming capabilities provide the versatility to tackle a multitude of applications. Two modes of operation, single or continuous cycling allow for a single precise test or repetitive, consistent results. User selectable high and low force set points through RS232 interface or directly through the force gauge allows the test stand to stop at specific force loads while displaying and outputting the displacement. These motorized stands are offered in a wide range of force capacities in both vertical and horizontal (FGS-250PV Series is vertical only) configurations and are available in both standard and ultra-slow speeds. Series FGS FGS-100PX 100PX Horizontal Motorized Test Stand Features Series FGS-100PV Vertical Motorized Test Stand * 5 user programmable set points for speed, distance and stop time permit customized testing * Compatibility with nearly all manufacturers' force gauges enables flexibility in testing applications * Analog voltage output of displacement allows graphing and analysis of data on computer * Manually adjustable upper and lower limits restricts movement, allowing for precise testing * All gauge functions can be communicated through stand via RS232 interface allowing easy operation and data download * Compact, modular design reduces weight, footprint and cost of stand FGS-250PV Motorized Test Stand Shown with Optional Force Gauge Horizontal & Vertical Motorized Test Stand Specifications Model FGS-100PXH FGS-100PXL Operation Orientation Horizontal FGS-100PVH FGS-100PVL Vertical Capacity 110 lb (50 kg) Travel Speed -100PXH: 0.79 - 19.69 inch/min (20 - 500 mm/min); -100PXL: 0.19 - 4.72 inch/min (5.00 - 120 mm/min); -100PVH: 0.79 - 19.69 inch/min (20 - 500 mm/min); -100PVL: 0.39 - 3.93 inch/min (10 - 100 mm/min) Stroke 5.5" (140 mm) Vertical Clearance N/A Display Four digit LED, 0.41" high (10.5 mm), Reads in inches (0.01 resolution) or millimeters (0.1 resolution) Operating Mode Manual (MANU), Jogging (JOG), Single (SING), Continuous (CONT), Program (PROG) Time Delay 0 through 5 second delay between direction change Power 120 VAC, 60 Hz Product Weight 40 lb (18 kg) N/A 40 lb (18 kg) 2.4 - 7.1" (61 - 181mm) 5 steps, 1.18"/step (30 mm/step) 42 lb (19 kg) 2.4 - 7.1" (51 - 181 mm) 5 steps, 1.18"/step (30 mm/step) 42 lb (19 kg) FGS-250PV Programmable Motorized Test Stand Specifications Model FGS-250PVL FGS-250PVM FGS-250PVH Operation Orientation Vertical Capacity 500 lb, 250 kg, 2,500N Travel Speed -250PVL: 0.49 - 4.92 inch/min (12.5 - 125 mm/min); -250PVM: 1.97 - 19.70 inch/min (50 - 500 mm/ min); -250PVH: 5.12 - 49.23 inch/min (130 - 1250 mm/min) Stroke 31.10" (790 mm) Display Four digit LED, 0.41" high (10.5 mm), test stand can change English to metric Operating Mode Manual (MANU), Jogging (JOG), Single (SING), Continuous (CONT), Program (PROG) Communication Gauge: FGV, FGV-H. To PC: RS-232C (Baud rate: 9600bps, data length: 8 bit, stop bit: 1 bit, parity: none Limit Switch Repeatability -250PVL: 0.0006" (0.015 mm) at max. speed; -250PVM: 0.0016" (0,04 mm) at max. speed; -250PVH: 0.0036" (0.092 mm at max. speed Zeroing Feature Repeatability -250PVL: Max. 0.015" (0.383 mm) at max. speed; -260PVM: Max. 0.065" (1.649 mm) at max. speed; -250PVH: Max. 0.172" (4.355 mm) at max. speed Deflection 0.033" (0.85 mm) at max, capacity Power 120 VAC, 60 Hz Product Weight -PVL: 115.7 lb (52.5 kg); -PVM: 115.7 lb (52.5 kg); PVH: 126.8 lb (57.5 kg) Ordering Details FGS-100PXH Horizontal Motorized Test Stand with standard speed and 110 lb (50 kg) capacity FGS-100PVH Vertical Motorized Test Stand with standard speed and 110 lb (50 kg) capacity FGS-100PXL Horizontal Motorized Test Stand with low speed and 110 lb (50 kg) capacity FGS-100PVL Vertical Motorized Test Stand with low speed and 110 lb (50 kg) capacity FGS-250PVL Vertical Motorized Test Stand with low speed and 500 lb (250 kg) capacity FGS-250PVM Vertical Motorized Test Stand with standard speed and 500 lb (250 kg) capacity FGS-250PVH Vertical Motorized Test Stand with high speed and 500 lb (250 kg) capacity Accessories DISTRIBUTED BY: UNI-PLATE Gauge mounting plate for FGS-100 Series Stands FGV-FGS250P Interface cable for FGS-100 & FGS-250 force test stands FGS-ANALOG Analog output cable for force test stands FG-250PV-RS232 RS-232 Communication cable from FGS stand to computer FG-HORIZ-ADAP Grip adapter for horizontal test stands *For available force grips and adapters visit our website at www.shimpoinst.com