1.2x1.0mm Ceramic SMD Crystal CABS DATASHEET Tolerances down to 10 PPM Stabilities down to 10 PPM Temperature Ranges as wide as -40C to +85C * SPECIFICATIONS PARAMETERS Frequency Range Frequency Tolerance @ 25C Frequency Stability, ref @ 25C Temperature Range Operating (TOPR) Storage (TSTG) Shunt Capacitance (CO) Load Capacitance (CL) Drive Level Aging per year Maximum Soldering Temp / Time Moisture Sensitivity Level (MSL) Termination Finish Lead (Pb) Free RoHS/REACH Compliant Frequency Range (MHz) 32.000 ~ 32.999999 33.000 ~ 36.999999 37.000 ~ 80.000 MAX (unless otherwise noted) 32.000 ~ 80.000 MHz (See options on page 2) (See options below) (See options below) -55C ~ +125C 2 pF (See options on page 2) 100 W (10W typical) 3 PPM 260C / 10 Seconds x 2 1 Au over Ni Yes Yes Operating Mode Max ESR Fundamental Fundamental Fundamental 100 80 60 . *Available Operating Temperatures and Stabilities* Operating 10 PPM Temperature -20 ~+70C O -30 ~+85C X -40 ~+85C X Key: O=Available, X=Not Available *Does not imply a stocked part. 15 PPM 20 PPM 25 PPM O O O O O O O O O Note: Dimensional drawing is for reference to critical specifications defined by size measurements. Certain non-critical visual attributes, such as side castellations, etc. may vary. (c) Copyright 2019 Fox Electronics. All rights reserved Title / Description: CABS SERIES STANDARD SPECIFICATIONS Drawing Number: CABS-DOC-1 Size: A Part Number: Cage: 61429 Draftsperson: BEC Approved: MAJ Revision Date: 06/13/2019 Page 1 of 2 1.2x1.0mm Ceramic SMD Crystal CABS DATASHEET * TAPE SPECIFICATIONS (millimeters) * REEL SPECIFICATIONS (millimeters) A B C D E F Reel QTY G H I J K L M 1.5 4.0 4.0 3.5 8.0 0.45 -T3 = 3,000 -T5 = 5,000 2.0 13 21 60 180 9.0 1.5 Available Options & Part Identification for CABS* F CABS F F D M 40.0 F CABS F F D M 40.0 FOX Model Number Tolerance D = 25 PPM E = 20 PPM F = 15 PPM H = 10 PPM Stability D = 25 PPM E = 20 PPM F = 15 PPM H = 10 PPM Load Capacitance1 B = 6 pF V = 7 pF D = 8 pF E = 10 pF G = 12 pF Operating Temperature F = -20 ~ +70C K = -30 ~ +85C M = -40 ~ +85C Frequency (MHz) *Not all frequency, tolerance, stability, load, and operating temperature combinations may be available. 1 Listed load capacitances represent the most commonly used. Other load capacitances are available. Corporate Headquarters 5570 Enterprise Parkway Fort Myers, FL 33905 http://www.FOXONLINE.com Sales 1-888-GET-2-FOX (1-888-438-2369) or 1-239-693-0099 http://www.FOXONLINE.com/repdisty Tech Support http://www.FOXONLINE.com/email PRODUCT USE: Fox Electronics reserves the right to modify the products and/or specifications described herein at any time and at Fox Electronics' sole discretion. All information in this document, including descriptions of product features and performance, is subject to change without notice. Performance specifications and the operating parameters of the described products are determined in the independent state and are not guaranteed to perform the same way when installed in customer products. The information contained herein is provided without representation or warranty of any kind, whether express or implied, including, but not limited to, the suitability of Fox Electronics' products for any particular purpose, an implied warranty of merchantability, or non-infringement of the intellectual property rights of others. This document is presented only as a guide and does not convey any license under intellectual property rights of Fox Electronics or any third parties. Fox Electronics' products are not intended for use in applications involving extreme environmental conditions or in life support systems or similar devices where the failure or malfunction of a Fox Electronics product can be reasonably expected to significantly affect the health or safety of users. Anyone using a Fox Electronics product in such a manner does so at their own risk, absent an express, written agreement by Fox Electronics. Fox Electronics and the Fox logo are registered trademarks of Fox Electronics. Product specification is subject to change without notice. Other trademarks and service marks used herein, including protected names, logos and designs, are the property of Fox Electronics or their respective third-party owners. For datasheet type definitions and a glossary of common terms, visit http://www.foxonline.com/tgcrystals.html . (c) Copyright 2019 Fox Electronics. All rights reserved Title / Description: CABS SERIES STANDARD SPECIFICATIONS Drawing Number: CABS-DOC-1 Size: A Part Number: Cage: 61429 Draftsperson: BEC Approved: MAJ Revision Date: 06/13/2019 Page 2 of 2