P-Channel JFET Switch
2N5114 – 2N5116
GENERAL DESCRIPTION
Ideal for inverting switching or "Virtual Gnd" switching into
inverting input of Op. Amp. No driver is required and ±10VAC
signals can be handled us ing only +5V logic (TTL or CMOS).
FEATURES
••Low ON Resistance
••ID(off)<500pA
••Swit ches directly from TTL Logic
ABSOLUTE M AXIM UM R A T INGS
(TA = 25oC unless o th erw ise noted)
Gate- Dr ain or Gate -So urce Voltage . . . . . . . . . . . . . . . . . 30V
Gate Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50mA
Stor age Temper at ure R a nge. . . . . . . . . . . . . -65oC t o +200oC
Oper at ing Temper atur e Ra nge . . . . . . . . . . . -55oC to +200oC
Lead Tem pera tu re (So ld er ing, 10se c). . . . . . . . . . . . . +300 oC
Power Dissipat ion . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500mW
Derate above 25oC . . . . . . . . . . . . . . . . . . . . . . . . 3mW /oC
NOTE: Str esses above those listed under "Absol ute M axi mum
Ratings " may cause permanent damage to the device. These are
stress ratings only and functional operation of the device at these or
any other conditions abov e those indic ated in the operational s ections
of the specifications is not implied. Exposure to absolute maximum
rating con ditions for extended per i ods may affect devic e reliability.
ORDERING INFORMATION
Part Package Temperature Range
2N511 4-16 Herm etic T O- 18 -55 oC to + 200oC
X2N511 4-16 Sort ed Chips in Car rier s -55oC to +200oC
LLC
PIN CONFIGUR ATI O N
S
TO-18
G,C
D
SWIT CHING CHARACTERI STICS (TA = 25oC unless o th erw ise specified)
SYMBOL PARAMETER 2N5114 2N5115 2N5116 UNITS
MAX MAX MAX
tdTurn-ON Delay Time 6 10 12
ns
trRise Time (Note 2) 10 20 30
toff Turn-OFF Dela y Time (Note 2) 6 8 10
tfFall Time (Note 2) 15 30 50
ELECTRICA L CHARACTERI STIC S (TA = 2 5oC unle ss otherwise sp ecif ie d)
SYMBOL PARAMETER 2N5114 2N5115 2N5116 UNITS TEST CONDITIONS
MIN MAX MIN MAX MIN MAX
BVGSS Gate-Source Breakdown Vol tage 30 30 30 V IG = 1µA, VDS = 0
IGSS Gate Reverse Current 500 500 500 pA VGS = 20V, VDS = 0
1.0 1.0 1.0 µAT
A 150oC
ID(off) Drain Cutoff Current
-500 -500 -500 pA VDS = -15V
VGS = 12V (2N5114)
VGS = 7V (2N5115)
VGS = 5V (2N5116)
-1.0 -1.0 -1.0 µA
VPGate-Source Pinch-Off Voltage 5 10 3 6 1 4 V VDS = -15V, ID = -1nA
5508
CALOGIC LLC, 237 WHITNEY PLACE, FREMONT, CA 94539, 510-656-2900 PHONE, 510-651-1076 FAX DS0078 REV A