Compact Diagonal Series K2E200-AD O 200 mm Ingress protection rating UL Chart 544 Bearing M2E068-CF Mass K2E200-AD20-01 Temperature range (1) 550 Max back pressure M2E068-CF Current draw (1) K2E200-AD08-02 Speed (1) cfm Power input (1) Motor Frequency Type Voltage Nominal Data VAC Hz W rpm A in. H20 C lbs 115V 50/60 90 3200 0.80 0.844 -25...85 5.73 Ball IP44* Yes A 230V 50/60 85 3150 0.38 0.844 -25...65 5.73 Ball IP44* Yes B Phase Air flow Highlights: - Thermal overload protector (TOP) internally connected Material: Impeller: PA plastic Housing: PP plastic Mounting position: Shaft horizontal or rotor on top; rotor on bottom on request Condensate discharge holes: None Direction of rotation: Clockwise, seen on rotor 1~ 1~ (1) Nominal data at free air. * Depending on installation and position. Curves in. wg 1.60 Air performance measured as per: ISO 5801, Installation category A, without protection against accidental contact. 1.40 1.20 Suction-side noise levels: LWA as per ISO 13347, LPA measured at 1m distance to fan axis. A 1.00 B 8 0.80 4 The values given are valid under the measuring conditions mentioned and may vary accoring to the actual installation situation. 3 7 0.60 0.40 6 With any deviation to the standard set-up, the specific values have to be checked and reviewed once installed or fitted. 2 For detailed information on the measuring set-up, please contact ebm-papst. pfs 0.20 0.00 0 qV 100 200 300 400 500 5 1 cfm 600 n Pe I LpAin LwAin rpm W A dB(A) dB(A) 3200 90 0.80 64 72 3120 95 0.83 63 71 3080 99 0.87 61 69 3095 97 0.85 61 69 3150 85 0.38 64 72 3065 90 0.40 63 71 3015 95 0.41 62 70 3035 92 0.40 62 70 K2E200-ADXX-XX Dimensions shown in millimeters Connection screen L black N blue PE green/yellow