The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. DN SERIES-NEW D SUBMINIATURE INTERFACE CONNECTORS General The DN series are compact, rectangular multi-contact connectors developed to meet the demand for smaller and slimmer electronic equipment. 2.54 mm grid contact position and Direct dip soldering on PCB enable high density circuit designing at reduced cost. Aluminum die-cast shell and Metallic shell areshieledto prevent from Electro-Magnetic interference. 20, 26, 36 and 50 way available. Features 1. 2.54 mm grid contact position enable high density circuit designing. 2. Stable quality due to the contact design based on our field-proven SM series (D sub-connector). 3. One-touch lock system ensures perfect operation. 4. The cover case uses a thin, low-back compact design that meets the needs of high density mounting. It can be mounted between 17.78 millimeters (700mil) substrates. 5. The cover case is made of aluminum diecast to shield aginst electromagnetic waves In a combination with a connector metal shell, the cover case is an ideal solution for noise. 6. Dip soldering connectors are provided with snap clamps for temporarily fixing the connector on the PCB. 7. IDC termination types are for standard 1.27 mm pitch cables, and are available for two types of cables: AWG26 and AWG28. 8. Crimp contact cables from AWG26 through AWG28. 9. Allows you to take out the cable vertically or horizontally, as your application requires. Application Office Automation, Computers, Communications Equipment, Factory Automation, Home Automation and other commercial applications needing high density interconnections. 169 04/2009 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Specifications and Material Main specifications Main materials used Current capacity 3A Shell Rated voltage AC 200V Insulator PBT* Contacts Phosphor bronze Insulation resistance 5000m on higher at DC 500V Contact resistance 20m or less at DC 100mA Withstand voltage 1 minute AC 1000 Vrms Aluminum dei-cash Silver coating Black Selective gold plating *UL94V-0 Ordering Information DN 10 - 26 S (1) (2) (3) (4) (8) DN - 26 - CVE 1 (1) (3) (5) DN 50 - 2628 PC 1 (1) (2) (6) (1) Series Number: DN (2) Type 10: Right Angle DIp Type 30: IDC Plug Type 50: Crimp Type (3) No. of Pins: 20, 26, 36 and 50 way (4) P: Plug S: Receptacle (5) Shell CVE1: Angle Cable Exit Shell CV1: Straight Cable Exit Shell (6) Applicable Wire 2628: AWG#26 ~ AWG#28 (7) Type of Contact Pin PC1: Bulk Pin Contact PC2: Chain Pin Contact (8) Specification (50): RoHS compliant (7) Cable specifications N: Pin Pin: AWG#28(7/0.127) AWG#26(7/0.16) 170 04/2009 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Crimp Pin Housing DN50-26P Unit: mm HRS No. No.of pin Part No. A B C 225-0016-3 225-0004-4 20 26 DN50-20P DN50-26P 35.36 22.86 31.38 42.98 30.48 39 225-0005-7 225-0006-0 36 50 DN50-36P DN50-50P 55.68 43.18 51.7 73.46 60.96 69.48 HRS No. No.of pin Part No. A B C 225-0030-4-50 225-0029-5-50 20 26 DN30-20P50 DN30-26P50 35.36 42.98 29.1 36.7 31.38 39 225-0027-0-50 225-0028-2-50 36 50 DN30-36P50 DN30-50P50 55.68 73.46 49.4 67.2 51.7 69.48 RoHS YES IDC Plug DN30-36P50 Unit: mm RoHS YES 171 04/2009 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Angle Cable Exit Shell DN-26-CVE1 Unit: mm HRS No. No.of pin Part No. A B C 225-0019-1 225-0020-0 20 26 DN-20-CVE1 DN-26-CVE1 45.9 53.5 12.7 13.7 9 9.7 RoHS 225-0021-3 225-0022-6 36 50 DN-36-CVE1 DN-50-CVE1 66.2 84 14.2 11 14.2 12x13 HRS No. No.of pin Part No. A B C RoHS 225-0031-7 225-0024-1 20 26 DN-20-CV1 DN-26-CV1 45.9 53.5 13.7 13.7 9 9.7 YES 225-0025-4 36 DN-36-CV1 66.2 14.2 11 YES Straight Cable Exit Shell DN-26-CV1 Unit: mm 172 04/2009 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Right Angle P.C. Mount Receptacle (Dip Post) DN10-26S50 Unit: mm HRS No. No.of pin Part No. A B C 225-0015-0-50 225-0001-6-50 20 26 DN10-20S50 DN10-26S50 32 39.6 38.9 46.5 22.86 30.48 225-0002-9-50 225-0003-1-50 36 50 DN10-36S50 DN10-50S50 52.3 70.1 59.2 77 43.18 60.96 RoHS YES PCB Layout mounting panel thickness 1.6mm Unit: mm No.of pin A B 20 26 36 50 32.0 39.6 52.3 70.1 22.86 30.48 43.18 60.96 PCB End 173 04/2009 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Straight P.C. Mount Receptacle (Dip Post) DN20B-26S50 Unit: mm HRS No. No.of pin Part No. A B C D 225-0045-1-50 20 DN20B-20S50 38.9 26 36 50 DN20B-26S50 DN20B-36S50 DN20B-50S50 46.5 59.2 77 22.86 30.48 43.18 60.96 53.9 225-0046-4-50 225-0047-7-50 225-0048-0-50 60.9 68.5 81.2 99 61.5 74.2 92 RoHS YES PCB Layout Contact No.1 min min min Panel Cutout Unit: mm No.of pin A B C 20 53.9 9 40.9 26 36 50 61.5 74.2 92 12 17 24 48.5 61.2 79 Note: 1. Use a 1.6-mm thick panel 2. The substrate reference drawing shows the connector-mounting surface. The area marked with [ ] is to be prohibited from entering any pattern. 3. The substrate and panel are related to each other, with a 0/3.2 mounting hole as the reference point. 4. The panel is 1.6 millimeters thick. 174 04/2009 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Pin Crimp Terminal DN50-2628PC1 (Bulk) DN50-2628PC2 (Chain) Note: Bulk in bags of 100pc. Chain on reels of 1,000pcs HRS No. Part No. Remarks 225-0007-2 DN50-2628PC1 Loose piece contact 225-0008-5 DN50-2628PC2 Strip contact RoHS YES Applicable Wire Applicable wire: AWG No.26 ~ AWG No.28 Outer diameter of applicable wire Unit: mm Way 20 26 36 50 Outer diameter Max. 9.0 Max. 9.7 Max. 11.0 Max. 12.0 Tooling (for Crimp Plug) * CM-105 Crimp Maching This machine has been carefully designed to meet the many requests for advanced crimping machines that can be used in a wider range of applications. This machine offers easy setup adjustment and applicator mounting. We are confident that the machine will find many applications as an easy-to-use semiautomatic machine for crimping strip contacts. POWER SOURCE AC 100V 200W TOTAL WEIGHT 75 kgs PERFORMANCE 2,000-4,000 crimps per hour WORK RANGE Adaptable to other HIROSE dies Semi-Auto Machine CM-105 (CL901-0005-4) Applicator (Die) 105-DN50 (CL901-0208-1) Hand Tool DN50-TA2628HC (CL250-0101-0) 175 04/2009 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Tooling (for IDC Plug) Hand Press Pressure Block Universal Guide Plate HRS No. Part No. HRS No. Part No. HRS No. Part No. 902-0068-0 902-0069-3 902-0143-4 DN30-26PB DN30-36PB DN30-20PB 902-0067-8 DN30-XXGP 550-0082-2 Hi-Flex termination press and accessories 902-0144-7 DN30-50PB Hi-Flex Termination Press and Accessories General The Hi-Flex termination press and its accessories connect the connectors to the HIF series ribbon cables more securely and quickly. Features 1. No incomplete connections. A preventive ratcht-type device ensures against misconnections. 2. Prevents damage to connectors during connection. The guide plate works as a stopper to prevent damage to connectors due to connection pressure. 3. Easy to position the connector and cable. The guide plate case guide and cable stopper help positioning. 4. Capable of cable connection at an intermediate point when the cable stopper is removed. 176 04/2009