PHE845 RoHS Compliant * EMI suppressor, class X1, metallized polypropylene * 0.01 - 1.0 F, 760 VAC/600 VAC, +105C L typical applications For worldwide use as electromagnetic interference suppressor in all X1 and across-the-line applications. B Construction Triple winding of metallized polypropylene. Encapsulated in self-extinguishing material meeting the requirements of UL 94 V-0. H 0.5 Not for use in series with the mains. See www.kemet.com for more information. d p Technical data Rated voltage 760 VAC 50/60 Hz (ENEC) 600 VAC 50/60 Hz (UL, CSA) Capacitance range 0.01 - 1.0 F Capacitance tolerance 20% standard, 10% option Temperature range -40 to +105C Climatic category 40/105/56/B Tolerance in lead length +0 < 30 mm -1 mm Approvals ENEC, UL, cUL 30 mm p d 22.5 0.4 27.5 0.4 37.5 0.5 +5 -0 l b std l max l b 0.8 6 30 0.8 6 30 1.0 6 30 0.4 0.4 0.7 mm Dissipation factor Maximum values at +23C C 0.1 F 0.1F < C 1 F 1 kHz 0.1% 0.1% 10 kHz 0.2% 0.4% 100 kHz 0.6% - Test voltage between terminals The 100% screening factory test is carried out at 4250 VDC. The voltage level is selected to meet the requirements in applicable equipment standards. All electrical characteristics are checked after the test. Resonance frequency Tabulated self-resonance frequencies f0 refer to 5 mm lead length. Insulation resistance C 0.33 F: 30 000 M C > 0.33 F: 10 000 s In DC application Recommended voltage: 1500VDC Environmental test data Endurance EN/IEC 60384-14:2005 1.25 x UR VAC 50 Hz, once every hour increased to 1000 VAC for 0.1 s, 1000 h at upper rated temperature Vibration IEC 60068-2-6 Test Fc 3 directions at 2 hours each, 10-55 Hz at 0.75 mm or 98 m/s2 No visible damage No open or short circuit Bump IEC 60068-2-29 Test Eb 1000 bumps at 390 m/s2 No visible damage No open or short circuit Change of temperature IEC 60068-2-14 Test Na Upper and lower rated temperature 5 cycles No visible damage Active flammability EN/IEC 60384-14:2005 Passive flammability EN/IEC 60384-14:2005 Humidity UL1414 Enclosure material of UL94V-0 flammability class IEC 60068-2-3 Test Ca +40C and 90 - 95% R.H. 56 days 57 phe845 article table Capaci- BoxMax dimensionsMax tance code in mm fO dU/dtArticle code F BHLMHzV/s Lead spacing 22.5 mm 0.010 0.015 0.022 0.033 0.047 0.068 0.10 0.15 0.22 D13 D13 D13 D17 D15 D18 D16 D20 D19 6.5 6.5 6.5 7.0 9.0 10.5 11.0 13.5 15.5 14.5 14.5 14.5 16.5 18.5 19.0 21.5 23.0 24.5 26.0 26.0 26.0 26.0 26.0 26.0 26.0 26.0 26.0 11 9.2 7.6 6.4 5.3 4.4 3.5 3.1 2.7 100 100 100 100 100 100 100 100 100 PHE845VD5100MR06L2 PHE845VD5150MR06L2 PHE845VD5220MR06L2 PHE845VD5330MR06L2 PHE845VD5470MR06L2 PHE845VD5680MR06L2 PHE845VD6100MR06L2 PHE845VD6150MR06L2 PHE845VY6220MR06L2* Approvals Certification BodySpecification ENEC EN/IEC 60384-14:2005 UL UL 1283 cUL recognition C 22.2 No. 8 (UR=600 VAC) Ordering information The article code for the standard part is given in the article table. For other options, see page 11. Lead spacing 27.5 mm 0.10 0.15 0.22 0.33 0.47 F11 F12 F03 F15 F16 10.5 11.5 13.5 19.0 21.0 20.5 22.5 23.0 29.0 30.0 31.5 31.5 31.5 31.5 31.5 3.4 3.0 2.4 2.0 1.6 100 100 100 100 100 PHE845VF6100MR06L2 PHE845VF6150MR06L2 PHE845VF6220MR06L2 PHE845VF6330MR06L2 PHE845VZ6470MR06L2* Lead spacing 37.5 mm 0.47 0.47 0.68 1.0 R04 R02 R03 R06 15.0 16.5 19.0 21.0 26.0 32.0 36.0 38.0 41.0 41.0 41.0 41.0 1.6 1.6 1.2 1.0 100 100 100 100 PHE845VW6470MR06L2* PHE845VR6470MR06L2 PHE845VR6680MR06L2 PHE845VW7100MR06L2* (UR=600 VAC) Marking * * * * * * * * * * RIFA RIFA article code Rated capacitance Capacitance tolerance code Rated voltage X1 Approval marks Manufacturing date code IEC climatic category Passive flammability class * Only 20% Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute - and we specifically disclaim - any warranty concerning suitability for a specific customer application or use. This Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by us with reference to the use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained.