LQM2MPN2R2NG0# "#" indicates a package specification code. < List of part numbers with package codes > LQM2MPN2R2NG0L , LQM2MPN2R2NG0B Shape Notes In operating temperatures exceeding +85C, derating of current is necessary for the LQM2MPN_G0 series. Please apply the derating curve shown in the chart according to the operating temperature. Please consider "Notice (Rating)." When rated current is applied to the products, the temperature rise caused by self-generated heat shall be limited to 40C max. References Packaging code L size 2.0 0.15mm W size 1.6 0.15mm T size 0.9 0.1mm Size code in inch (mm) 0806 (2016) Specifications Minimum quantity L 180mm Embossed taping 3000 B Packing in bulk 1000 Mass (Typ.) 1 piece 0.012g Specifications Inductance 2.2H 30% Inductance test frequency 1MHz Rated current (Itemp) (Based on Temperature rise) 1.2A(Ambient temp.85) 0.9A(Ambient temp.125) Max. of DC resistance 0.138 Avg. of DC resistance 0.11 (typ.) Self resonance frequency (min.) 40MHz Operating temperature range -55 to 125 Class of magnetic shield Ferrite Core Series LQM2MPN_G0 1 of 3 1.This datasheet is downloaded from the website of Murata Manufacturing Co., Ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2.This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. URL : https://www.murata.com/ Last updated: 2019/03/16 Notice For General 2 of 3 1.This datasheet is downloaded from the website of Murata Manufacturing Co., Ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2.This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Last updated: 2019/03/16 Chart of characteristic data (The charts below may show another part number which shares its characteristics.) 3 of 3 1.This datasheet is downloaded from the website of Murata Manufacturing Co., Ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2.This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Last updated: 2019/03/16