Loose R.41 Taped Fig.1 Y2 / X1 CLASS (IEC 60384-14) MKP Series Fig.2 metallized polyPROPYLENE film capacitor SELF-HEALING PROPERTIES Typical applications: Interference suppression and acrossthe-line applications. Suitable for use in situations where failure of the capacitor could lead to danger of electric shock. PRODUCT CODE: R41 Not for use in series with the mains. See www.kemet.com for more information. Note: R.41 series has replaced the R73 series (available only upon request). For new design we suggest the use of the R.41 series. O d 0.05 p = 7.5 p = 10 p = 15 15<p27.5 p = 37.5 0.5 0.6 0.6 or 0.8* 0.8 1 * See size table. All dimensions are in mm. GENERAL TECHNICAL DATA Dielectric: polypropylene film. Plates: metal layer deposited by evaporation under vacuum. Winding: non-inductive type. Leads: O 0.6 tinned wire. O = 0.5 tinned wire, low thermical conductivity. Protection: plastic case, thermosetting resin filled. Box material is solvent resistant and flame retardant according to UL94 V0. Marking: Manufacturer's logo, series, capacitance, tolerance, rated voltage, capacitor class, dielectric code, climatic category, passive flammability category, manufacturing date code, approvals, manufacturing plant. Climatic category: 40/110/56 IEC 60068-1 Pitch Box thickness (B) (mm) (mm) Maximum dimensions (mm) B max H max L max 7.5 10.0 15.0 15.0 22.5 27.5 37.5 B +0.1 B +0.2 B +0.2 B +0.2 B +0.2 B +0.2 B +0.3 All All <7.5 7.5 All All All H +0.1 H +0.1 H +0.1 H +0.1 H +0.1 H +0.1 H +0.1 L +0.2 L +0.2 L +0.3 L +0.5 L +0.3 L +0.3 L +0.3 test method and performance Damp heat, steady state: Test conditions Temperature: Relative humidity (RH): Test duration: +402C 93 2% 56 days Performance Dielectric strength: no dielectric breakdown or flashover at 1500Vac/1 min Capacitance change |C/C|: 5% Insulation resistance: 50% of initial limit. Endurance: Test conditions Temperature: Test duration: Voltage applied: Operating temperature range: -40 to+110C Related documents: IEC 60384-14, EN 60384-14. Performance 110C2C 1000 h 1.7 x VR + 1000Vac 0.1 s/h Dielectric strength: electrical characteristics Rated voltage (VR): 300Vac / 1000Vdc; 50/60Hz Capacitance range: 1000pF to 1.0F Capacitance values: E6 series (IEC 60063 Norm). Capacitance tolerances (measured at 1 kHz): 10% (K); 20% (M). Dissipation factor (DF): tg x 10-4 at +25C 5C: 30 (20)* at 1kHz * Typical value Insulation resistance: no dielectric breakdown or flashover at 1500Vac/1 min Capacitance change |C/C|: 10% Insulation resistance: 50% of initial limit. Resistance to soldering heat: Test conditions Solder bath temperature: +260C5C Dipping time (with heat screen):10 s1 s Performance Capacitance change |C/C|: 2% Test conditions Temperature: +25C5C Voltage charge time: 1 min Voltage charge: 100 Vdc Performance 1 x 105 M 30000 s (5 x 105 M )* for C 0.33F (150000 s)* for C >0.33F * Typical value Test voltage between terminations (on all pieces): 2500Vac for 1 s + 5000Vdc for 1 s at +25C5C 169 09/2008 R.41 Y2 / X1 CLASS (IEC 60384-14) MKP Series meTAllized PolYPRoPYlene Film CAPACiToR SELF-HEALING PRoPERTIES Typical applications: Interference suppression and acrossthe-line applications. Suitable for use in situations where failure of the capacitor could lead to danger of electric shock. PRoDUCT CoDE: R41 Not for use in series with the mains. See www.kemet.com for more information. Table 1 Rated Cap. 300 Vac/1000Vdc Std dimensions B Od max dv/dt at 420Vdc (V/ s) H L p 1000 pF 4.0 9.0 10.0 7.5 0.5 800 R413D 1100 - - 00 - 2200 pF 4.0 9.0 10.0 7.5 0.5 800 R413D 1220 - - 00 - 3300 pF 5.0 10.5 10.0 7.5 0.5 800 R413D 1330 - - 00 - 4700 pF 6.0 12.0 10.5 7.5 0.5 800 R413D 1470 - - 00 - 1000 pF 4.0 9.0 13.0 10.0 0.6 800 R413F 1100 - - 00 - 1500 pF 4.0 9.0 13.0 10.0 0.6 800 R413F 1150 - - 00 - 2200 pF 4.0 9.0 13.0 10.0 0.6 800 R413F 1220 - - 00 - 3300 pF 4.0 9.0 13.0 10.0 0.6 800 R413F 1330 - - M1 - 4700 pF 5.0 11.0 13.0 10.0 0.6 800 R413F 1470 - - M1 - 6800 pF 6.0 12.0 13.0 10.0 0.6 800 R413F 1680 - - 00 -M 3300 pF 5.0 11.0 18.0 15.0 0.6 600 R413I 1330 - - 00 - 4700 pF 5.0 11.0 18.0 15.0 0.6 600 R413I 1470 - - 00 - 6800 pF 5.0 11.0 18.0 15.0 0.6 600 R413I 1680 - - 00 - 0.010 F 5.0 11.0 18.0 15.0 0.6 600 R413I 2100 - - 00 - 0.015 F 5.0 11.0 18.0 15.0 0.6 600 R413I 2150 - - M1 - 0.022 F 6.0 12.0 18.0 15.0 0.6 600 R413I 2220 - - M1 - 0.033 F 7.5 13.5 18.0 15.0 0.6 600 R413I 2330 - - M1 - 0.047 F 8.5 14.5 18.0 15.0 0.6 600 R413I 2470 - - M1 - 0.068 F 11.0 19.0 18.0 15.0 0.8 600 R413I 2680 - - 00 - 0.047 F 6.0 15.0 26.5 22.5 0.8 500 R413N 2470 - - 00 - 0.068 F 6.0 15.0 26.5 22.5 0.8 500 R413N 2680 - - M1M - in PRoGReSS 0.068 F 7.0 16.0 26.5 22.5 0.8 500 R413N 2680 - - 00 - 0.10 F 8.5 17.0 26.5 22.5 0.8 500 R413N 3100 - - M1 - 0.15 F 10.0 18.5 26.5 22.5 0.8 500 R413N 3150 - - M1 - 0.22 F 13.0 22.0 26.5 22.5 0.8 500 R413N 3220 - - 00 0.22 F 13.0 22.0 32.0 27.5 0.8 400 R413R 3220 - - 00 - 0.33 F 14.0 28.0 32.0 27.5 0.8 400 R413R 3330 - - 00 - 0.47 F 18.0 33.0 32.0 27.5 0.8 400 R413R 3470 - - 00 - 0.68 F 18.0 33.0 32.0 27.5 0.8 400 R413R 3680 - - 00 - 0.47 F 13.0 24.0 41.5 37.5 1.0 300 R413W 3470 - - 00 - 0.68 F 16.0 28.5 41.5 37.5 1.0 300 R413W 3680 - - 00 - 1.0 F 20.0 40.0 41.5 37.5 1.0 300 R413W 4100 - - 00 - Mechanical version and packaging (Table1) Tolerance: K (10%); M (20%) Standard packaging style Part number Taping style ordering code (Digit 10 to 11) P2 (mm) Fig. (No.) Pitch (mm) AMMo-PACK AMMo-PACK AMMo-PACK 6.35 12.70 19.05 1 1 2 7.5 10.0/15.0 22.5 DQ DQ DQ REEL O 355mm REEL O 500mm REEL O 500mm 6.35 12.70 19.05 1 1 2 7.5 10.0/15.0 22.5/27.5 CK CK CK (mm) Loose, short leads Loose, long leads (p<10mm) Loose, long leads (p=10mm) Loose, long leads (p15mm) 44 +2 17 +1/-2 00 Z3 25 1 JY 25 +2/-1 30 +5 50 40 Note: Ammo-pack is the preferred packaging for taped version APPRoVAlS (*) ENEC IEC 60384-14 Class Y2 / X1 File No. V4160 UL 1414 (250Vac- 85C) Across-the-line FileNo.E97797 CSA - C22.2 No.1 (250Vac- 85C) Across-the-line certified for Canada File No. E 97797 UL 1283 (300 Vac-110C) Electromagnetic Interference Filters File No. E85238 CSA - C22.2 No.8 (300 Vac-110C) Electromagnetic Interference Filters certified for Canada File No.E85238 GB IT 14472 Class Y2 / X1 File CQC03001006820 CQC03001006821 (in progress for pitch 7.5 mm) Approved according to IEC 60384-14 According to IEC 60065. (*) ENEC mark has replaced all the following European National marks: E12 Series available upon request All dimensions are in mm. 09/2008 lead length 170