Metallized polyester capacitors
in PCM 2.5 mm
Ideally suited for decoupling up to high-frequency ranges. Very advantageous
volume/capacitance ratio. Wide capacitance range with smallest box sizes. PCM 2.5
mm technology with low self-inductance for low damping applications. Available taped
and reeled.
Technical Data
Dielectric: Polyethylene terephthalate film.
Capacitor electrodes: Vacuum-deposited aluminium.
Encapsulation: Flame retardent plastic case,
UL 94 V-0, with epoxy resin seal.
Colour: Red. Marking: White.
Temperature range: -55° C to +100° C.
Test specifications: In accordance with
IEC 60384-2 and EN 130400 (u. prep.).
Test category: 55/100/21 in accordance with IEC.
Insulation resistance at +20° C:
In accordance with IEC 60384-2 and
EN 130400 (u. prep.).
Measuring time: 1 min.
Capacitance tolerances: +/-20%, +/-10%,
(+/-5% available subject to special enquiry).
Test voltage: 1.6 Vr, 2 sec.
Dissipation factors at +20° C: tan delta
UrUtest C <= 0.33 µF0.33µF<C<=1.5µF
16 VDC 10 V >= 3.75 x 103 MOhms
Mean value:1x104 MOhms
>= 1250 sec
(MOhms x µF)
Mean value:
3000 sec
50 VDC 10 V >= 3.75 x 103 MOhms
Mean value:1x104 MOhms
>= 1250 sec
(MOhms x µF)
Mean value:
3000 sec
63 VDC 50 V >= 1 x 104 MOhms
Mean value:2x104 MOhms -
100VDC 100V >= 1.5 x 104 MOhms
Mean value:3x104 MOhms -
at f C <= 0.1 µF0.1 µF < C <= 1.5 µF
1 kHz
10 kHz
100 kHz
<= 8 x 10-3
<= 15 x 10-3
<= 25 x 10-3
<= 8 x 10-3
<=15 x 10-3
-
Maximum pulse rise time:
for pulses equal to the rated voltage.
Vibration: 6 hours at 10...2000 Hz and 0.75 mm
displacement amplitude or 10 g in accordance
with IEC 60068-2-6.
Low air density: 1 kPa = 10 mbar in accordance
with IEC 60068-2-13.
Bump test: 4000 bumps at 390 m/sec2 in accordance with
IEC 60068-2-29.
Voltage derating: A voltage derating factor of 1.25% per K
must be applied from +85° C for DC voltages and from +75°
C for AC voltages.
Impedance change with frequency
(general guide)
Capacitance
pF/µFPulse rise time V/µsec
max. operation test
1000...2200
3300...6800
0.01...0.022
0.033...0.068
0.1...0.33
0.47 ...1.0
1.5
175
100
50
30
20
15
12
1750
1000
500
300
200
150
120
Capaci-
tance
16 VDC/
10 VAC* 50 VDC/
30 VAC* 63 VDC/
40 VAC* 100 VDC/
63 VAC* * AC voltage: f = 50 Hz;
1.4 x Urms + UDC <= Ur
**PCM = Printed circuit module
= lead spacing.
Dims. in mm
d = 0.4
Ø
Rights reserved to amend design data
without prior notification.
WHLPCM** WHLPCM** WHLPCM** W.H.LPCM**
1000pF
1500 "
2200 "
3300 "
4700 "
6800 "
2.5
2.5
2.5
2.5
2.5
2.5
5.5
5.5
5.5
5.5
5.5
5.5
4.6
4.6
4.6
4.6
4.6
4.6
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
7
7
7
7
7
7
4.6
4.6
4.6
4.6
4.6
4.6
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
7
7
7
7
7
7
4.6
4.6
4.6
4.6
4.6
4.6
2.5
2.5
2.5
2.5
2.5
2.5
0.01µF
0.015 "
0.022 "
0.033 "
0.047 "
0.068 "
2.5
2.5
2.5
2.5
2.5
2.5
5.5
5.5
5.5
5.5
5.5
5.5
4.6
4.6
4.6
4.6
4.6
4.6
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
3
7
7
7
7
7
7.5
4.6
4.6
4.6
4.6
4.6
4.6
2.5
2.5
2.5
2.5
2.5
2.5
0.1 µF
0.15 "
0.22 "
0.33 "
0.47 "
0.68 "
2.5
3
3
3.8
4.6
4.6
5.5
7.5
7.5
8.5
9
9
4.6
4.6
4.6
4.6
4.6
4.6
2.5
2.5
2.5
2.5
2.5
2.5
3
3
3.8
4.6
4.6
7.5
7.5
8.5
9
9
4.6
4.6
4.6
4.6
4.6
2.5
2.5
2.5
2.5
2.5
37.5 4.6 2.5
1.0 µF
1.5 " 5.5
5.5 10
10 4.6
4.6 2.5
2.5 5.5 10 4.6 2.5
