Product Bulletin 1510/1550 and 1550/1625 nm Filter Wavelength Division Multiplexers The filter wavelength division multiplexers use interference filters to add a supervisory channel for active fiber monitoring. Stable and reliable, the filter WDMs have wide bandwidth, low insertion loss, and high channel isolation options. Key Features * Wide bandwidth * High channel isolation * Low insertion loss * Low polarization sensitivity * Stable and reliable Applications * Network control applications * Amplifier chain control * Network protocol information Compliance * Telcordia 1209 and 1221 FWDM 1510 | 2 Package Dimensions for 1510/1550 nm R 5.5 mm C (1625+1550) P R 32 or 40 mm Performance for 1510/1550 nm 5.5 mm P 32 or 40 mm Performance for 1550/1625 nm ATTENUATION (dB) C (1510+1550) Package Dimensions for 1550/1625 nm 35 30 0 25 20 0 15 10 0 REFLECT CHANNEL PASS CHANNEL 5 0 1510 1540 1570 1600 1630 1660 WAVELENGTH (nm) FWDM 1510 | 3 Specifications Parameter Pass port (CP) wavelength range P Pass port (CP) insertion loss Pass port (CP) flatness Pass port (CP) isolation at R Reflect port (CR) wavelength range R Reflect port (CR) insertion loss Reflect port (CR) flatness Reflect port (CR) isolation at P Directivity Optical return loss Polarization dependent loss Polarization mode dispersion Thermal stability Optical power Tensile load Operating temperature Storage temperature Typ. Max. Max. Min. Typ. Max. Max. Min. Min. Min. Max. Max. Max. Max. Max. Standard Standard High Isolation High Isolation Pass 1510 nm/ Pass 1550 nm/ Pass 1510 nm/ Pass 1550 nm/ Reflect 1550 nm Reflect 1510 nm Reflect 1550 nm Reflect 1510 nm 1500 to 1520 nm 0.7 dB 0.9 dB 0.3 dB 20 dB 1529 to 1565 nm 0.3 dB 0.5 dB 0.1 dB 1529 to 1565 nm 0.7 dB 0.9 dB 0.3 dB 20 dB 1500 to 1520 nm 0.3 dB 0.5 dB 0.1 dB 1500 to 1520 nm 1.1 dB 1.4 dB 0.6 dB 40 dB 1529 to 1565 nm 0.3 dB 0.5 dB 0.1 dB 1529 to 1565 nm 1.1 dB 1.4 dB 0.6 dB 40 dB 1500 to 1520 nm 0.3 dB 0.5 dB 0.1 dB 12 dB 55 dB 50 dB 0.1 dB 0.1 ps 0.005 dB/C 250 mW 5N 0 to 70 C -40 to 85 C 12 dB 55 dB 50 dB 0.1 dB 0.1 ps 0.005 dB/C 250 mW 5N 0 to 70 C -40 to 85 C 12 dB 55 dB 50 dB 0.1 dB 0.1 ps 0.005 dB/C 250 mW 5N 0 to 70 C -40 to 85 C 12 dB 55 dB 50 dB 0.1 dB 0.1 ps 0.005 dB/C 250 mW 5N 0 to 70 C -40 to 85 C Ordering Information ndicate your requirements by selecting one option from each configuration table. Please print the corresponding codes in the available boxes to form your part number. For more information on this or other products and their availability, please contact your JDS Uniphase account manager, or call 1-877-550-JDSU toll free in the U.S. and Canada, or visit www.jdsuniphase.com. Sample: FWDMDS1111110 FWDM D Code D Wavelength 1510/1550 nm Code S H Isolation Standard High isolation 111 Code 1 3 Code 1 2 Code 1 2 3 4 5 6 Package 5.5 (D) x 32 (L) mm 250 m fiber1 5.5 (D) x 40 (L) mm 900 m loose tube Model Pass 1510 /reflect 1550 Pass 1550/reflect 1510 Code 1 Fiber Length 1 meter1 2 meters 3 meters 0.5 meters 1.5 meters 2.5 meters Fiber Type Corning SMF-28 Code 0 1 2 3 4 5 7 8 9 A Connector2 No connector1 FC/PC FC/SPC FC/APC SC/SPC SC/SPC D4 ST FC/UPC SC/UPC 1. Standard. 2. Insertion loss and return loss depend on connector type. FWDM 1510 | 4 Specifications Parameter Pass port (CP) wavelength range P Pass port (CP) insertion loss Pass port (CP) flatness Pass port (CP) isolation at R Reflect port (CR) wavelength range R Reflect port (CR) insertion loss Reflect port (CR) flatness Reflect port (CR) isolation at P Directivity Optical return loss Polarization dependent loss Polarization mode dispersion Thermal stability Optical power Tensile load Operating temperature Storage temperature Typical Maximum Maximum Minimum Typical Maximum Maximum Minimum Minimum Minimum Maximum Maximum Maximum Maximum Maximum Pass 1550 nm/Reflect 1625 nm Pass 1625 nm/Reflect 1550 nm 1529 to 1565 nm 0.7 dB 0.9 dB 0.3 dB 30 dB 1600 to 1650 nm 0.3 dB 0.5 dB 0.1 dB 12 dB 55 dB 50 dB 0.1 dB 0.1 ps 0.005 dB/C 250 mW 5N 0 to 70 C -40 to 85 C 1600 to 1650 nm 0.7 dB 0.9 dB 0.3 dB 30 dB 1529 to 1565 nm 0.3 dB 0.5 dB 0.1 dB 12 dB 55 dB 50 dB 0.1 dB 0.1 ps 0.005 dB/C 250 mW 5N 0 to 70 C -40 to 85 C Ordering Information Indicate your requirements by selecting one option from each configuration table. Please print the corresponding codes in the available boxes to form your part number. For more information on this or other products and their availability, please contact your JDS Uniphase account manager, or call 1-877-550-JDSU toll free in the U.S. and Canada, or visit www.jdsuniphase.com. Sample: FWDME01111110 FWDM E 0 Code E Wavelength 1550/1625 nm Code 1 Package 5.5 (D) x 32 (L) mm 250 m fiber1 5.5 (D) x 40 (L) mm 900 m loose tube 3 111 Code 1 2 Model Pass 1625/reflect 1550 Pass 1550/reflect 1625 Code 1 Fiber Type Corning SMF-28 Code 1 2 3 4 5 6 Fiber Length 1 meter1 2 meters 3 meters 0.5 meters 1.5 meters 2.5 meters Code 0 1 2 3 4 5 7 8 9 A Connector2 No connector1 FC/PC FC/SPC FC/APC SC/SPC SC/SPC D4 ST FC/UPC SC/UPC 1. Standard. SMF-28 is a registered trademark of Corning Incorporated. ST is a registered trademark of Lucent Technologies. Telcordia is a trademark of Telcordia Technologies, Inc. U.S. and Canada Toll Free: 877-550-JDSU www.jdsuniphase.com 2. Insertion loss and return loss depend on connector type. All information contained herein is believed to be accurate and is subject to change without notice. No responsibility is assumed for its use. JDS Uniphase Corporation, its subsidiaries and affiliates, or manufacturer, reserve the right to make changes, without notice, to product design, product components, and product manufacturing methods. Some specific combinations of options may not be available. Please contact JDS Uniphase for more information. (c)JDS Uniphase Corporation. All rights reserved. 10113903